Download Article
Download Article
Replacing a timing belt is one of those things that scares most car owners because it is an in-depth job and usually quite expensive when done at a shop. More often than not, it is actually the tensioner that goes bad, not always the belt (unless it is really old). Most of the time a belt will break due to a seized pulley or bad tensioner allowing it to contact the timing cover.
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
Steps
Download Article
-
Listen. A bad tensioner will usually be accompanied by noise. This noise could be some type of squealing or rattling coming from the timing cover area. Also, when your timing belt is loose, it will cause some drivability issues usually under high load or high rpm. If your timing belt is not properly tensioned it will not keep the valves timed properly to the lower end and this will cause misfires, loss of power, bucking, and could even cause a no start condition. -
If the car runs, then stand on the side of the car where the pulleys are and try to distinguish where the noise is coming from. If you hear the noise coming from the front of the engine and it is not coming from your accessories, you may hear the belt flapping around due to the loss of tension.Advertisement -
If the car doesn't run and you are going to be the one doing the work, then remove your front accessories enough to get to the front cover. Once done, remove the front cover and check to see how loose the belt is. There should be a little slack on the opposite side of the tensioner, but not much. [1] X Research source -
With the cover off, check for the free movement of all the idler pulleys and the tension itself. It will be very apparent if something is broken. -
While you are in there, it is smart to just get a timing belt kit and replace all the pulleys and the belt. [2] X Research source -
Make sure that you line up all your marks and set the proper tension on the belt.
Advertisement
Community Q&A
Search
-
QuestionI have had to change my timing belt twice within a year. What could be the cause?Community AnswerFirst, check that none of the teeth that the belt is riding on are worn. Worn teeth will dig into the belt and cause premature wear. Then, check each gear's bearing. The belt tensioner bearing is the most likely one to fail first, but it's usually the easiest to check and fix. With the belt off, spin the belt tensioner (which is usually the plain, smooth wheel on a spring loaded arm; the smooth side of the belt rides along it). A bad bearing will not spin as easily and/or will sound rough. Finally, check for rubbing. See if anything is rubbing against the belt, causing it to fail.
-
QuestionHow can I know whether the mechanic has been truthful about the timing chain tensioner leaking and it costing $1000?Fouad Martin YousfiCommunity AnswerThe timing chain tensioner is a part that requires a lot of work to change. That's caused by the necessary time to reach the tensioner and to synchronize the chain, which is in the engine, not as a belt that is external. Sometimes, to prevent maintenance, your mechanic can change the chain, as if the tensioner was bad, the chain may have some damage too, and a good mechanic would take a profit of the removal to change everything that may need some further costly maintenance or irreversible damage. As far as the mechanic being truthful about it leaking, you could take it to another mechanic for a second opinion and quote.
-
QuestionDo I always have to get the "kit" for replacing the timing belt, or can I just replace the belt?Community AnswerThe kit is only necessary if you do not have the other parts or tools that it includes. If you have these items, you may replace the belt alone.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
About This Article
Thanks to all authors for creating a page that has been read 495,057 times.
Reader Success Stories
- "People can make you damage your car. I thank you for your step-by-step instructions. Keep up the good work."
Advertisement
87%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"People can make you damage your car. I thank you for your step-by-step instructions. Keep up the good work."
"Thank you very much! It helped me out pretty well."
"It gave me the info I required."
