How to Tie Paracord Knots

PDF download Download Article
PDF download Download Article

Knowing how to tie different kinds of paracord knots is important. You can use some knots as stoppers or buckles for bracelets, and you can use other types of knots to make up bracelets. Some of the more popular knots include the: Lanyard, Monkey's Fist, and Snake.

Method 1
Method 1 of 3:

Tying a Lanyard Knot

PDF download Download Article
  1. Make sure that the paracord is oriented vertically, with the folded end pointing upward. This is a great knot to add to the end of a paracord bracelet. Unlike the Monkey’s Fist, this knot does not require a lot of cording, so it is a good choice if you don't have a lot to work with. [1]
  2. Make the loop pointing towards the right, with the tail pointing towards the left. The tail should be oriented horizontally, under the left end of the paracord. [2]
    • The loop should be a few inches/centimeters down from the top fold.
    Advertisement
  3. This new loop should be pointing to the left. The tail should be horizontal as well, but this time, it should be in front of the right loop. [3]
    • Make sure that the left and right loops are at the same height and level. Don’t make one higher than the other.
  4. Take the strand that’s on the left side of your project. Feed it through the back of the left loop and out the front so that it is facing you. Point the strand upwards. [4]
  5. Take the strand that’s on the right side of your project. Pull it towards you, then feed it down through the right loop and out the back. Point the strand upwards as well so that it is parallel to the left strand. [5]
  6. Gather the 2 cords on the top in one hand, and the 2 cords on the bottom in your other hand. Pull on the cords slowly to tighten the knot. Adjust the knot as you pull so that it is symmetrical and looks like a braided bead. [6]
    • You may have to pull on the cords 1 at a time. You may also have to adjust the loops forming the knot.
    7. Advertisement
Method 2
Method 2 of 3:

Making a Monkey’s Fist

PDF download Download Article
  1. The Monkey's Fist is a popular decorative and stopper knot. You can add it to the end of a paracord bracelet, then slip it through the loop on the other end of the bracelet to close it.ref>[v161151_b01]. 09 October 2019.</ref> [7]
  2. Fold the last 2 to 3 inches (5.1 to 7.6 cm) of the paracord over. Wrap the doubled cord around your index finger to create a loop, then slide the folded end of the cord through the loop. Tighten the knot, bringing it as close to the folded end as possible. [8]
    • This replaces the marble you'd typically put inside this type of knot, so keep the overhand knot round. It's okay if it is loose, as long as it is round.
  3. You can cut the stub off with a pair of scissors or a sharp knife, leaving the longer cord behind. Make sure that you cut it as close to the overhand knot as possible. The stub won't fray because it will be inside the knot. [9]
    • You can melt the end of the stub with a lighter, or you can seal it with a drop of glue.
  4. Point your left index and middle fingers to the right. Slide the knot between them, stopping at the knuckle closest to your fingertip. Close the fingers until the knot is pinched between them. The cord should be draped over the top edge of your left index finger. [10]
  5. Pull the cord behind your index finger. Bring it down towards the bottom edge of your middle finger. Wrap it around your fingers like this for a total of 2 times. Stop when you reach the bottom of your middle finger on the second wrap. [11]
  6. You now have paracord wrapped around your index and middle fingers, forming a pocket. You need the knot to be inside this pocket. If the knot is outside the pocket, push it into that pocket so that it is still between your fingers, but covered up by the wrapped cord. [12]
  7. Pull the cord behind the loops wrapped vertically around your index and middle fingers. Slide it up through the V-shaped gap between the left side of the wrapped loops and the joint between your fingers. Pull it back towards the right edge. Do this 3 times, and finish with the cord pointing to the right. [13]
  8. Be careful while doing this. You want the wrapped cords to keep their shape with the ball in middle.ref>[v161151_b01]. 09 October 2019.</ref> Make sure that all of the horizontal and vertical loops are together and not coming apart. The holes between the loops should be distinct. [14]
  9. Turn the project so that the working end of cord is facing you. You will see a loop on the top and bottom of the project with a cord wrapped horizontally around them 3 times. Pull the end of the cord down through the top hole and up through the bottom hole. Do it for a total of 3 to 4 times until you see 3 vertical cords. [15]
  10. Rotate the knot until you find the first wrap you made. Pull on the next wrap to bring up the excess cording in a big loop. Find the next wrap, and pull on it to bring the loop forward. Continue pulling on the adjacent wraps, working the loop around the knot until you reach the cord. Pull on the cord to remove the excess loop. [16]
    • Don't pull too hard on the wraps and loops. Do this step twice, if needed.
    11. Advertisement
Method 3
Method 3 of 3:

Creating a Snake Knot

PDF download Download Article
  1. Do not cut the paracord; use everything that came in the package. Remember, you can always cut the excess off, but you can't add any back. [17]
    • The snake knot is actually a series of knots that are joined together to create a wide band. You can turn this into a keychain, belt, or bracelet.
  2. Make sure that the loop is pointing towards the right paracord. The rest of the left paracord should be behind the loop, pointing down. [18]
  3. Make sure that you pull it all the way through the loop. When you are done, position it behind the left paracord. [19]
  4. If you have not already, pull the right paracord behind the left one so that it will wrap around it. Pull the right paracord towards you, then feed it back through the loop. [20]
  5. As you tighten the knot, it will slide upwards, towards the folded/sealed part of your paracord. You want to leave some space between the knot and this area. [21]
    • How much space you leave is up to you; about 2 finger-widths would be perfect.
  6. Take the new right paracord. Bring it behind the new left paracord. Loosen the knot on the right side, then pull the right paracord down through the knot. [22]
  7. Simply tug on the left and right paracords until the knot tightens and is snug. Don’t tighten it so much that you can’t undo it later on, however.
  8. Tug on the left and right paracords to tighten the knot. Flip the bracelet over, then bring the right paracord behind the left one. Loosen the bottommost right knot, then feed the right paracord through it. Tighten the cords and repeat. Keep going until the snake is the length you want. [23]
  9. You can use a Lanyard knot or a Monkey’s Fist knot for this. Slide the knot through the loop at the beginning of the bracelet to close it.
    10. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Don't let the paracord twist while you work with it. This will give you a nicer finish. [24]
        Thanks
        Helpful 0 Not Helpful 0
      • Knots take up a lot of paracord. Work with the entire length of paracord, then off the excess at the end. When buying paracord, go for the longer bundle. [25]
        Thanks
        Helpful 0 Not Helpful 0
      • Melt the ends of your paracord by holding it close to a flame for a few seconds. The heat will cause the paracord to melt.
        Thanks
        Helpful 1 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Paracord, preferably 550
      • Knife or scissors
      • Lighter or glue (optional)

      You Might Also Like

      How to
      Tie a Tie
      How to
      Hogtie Someone for Bondage or BDSM: Instructions, Safety & More
      Easy Knots for Climbing, Boating, Fishing & More
      The Easy Way to Tie a Perfect Bow Tie
      How to
      Tie Yourself up With Rope
      How to
      Tie Hoodie Strings and Create the Perfect Knots
      How to
      Tie Yourself up in a Spreadeagle Position
      How to
      Tie Strong Knots
      How to
      Make a Paracord Lanyard
      How to
      Untie Tight Knots
      How to
      Tie an Adjustable Knot
      How to
      Quickly Create and Modify a Square Knot
      How to
      Tie A Hook on a Line: A Guide to 10 Useful Knots
      How to
      Tie a Swivel to Your Fishing Line
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=4djSAHb8b4A
      2. ↑ https://www.youtube.com/watch?v=4djSAHb8b4A&feature=youtu.be&t=40s
      3. ↑ https://www.youtube.com/watch?v=4djSAHb8b4A&feature=youtu.be&t=50s
      4. ↑ https://www.youtube.com/watch?v=4djSAHb8b4A&feature=youtu.be&t=1m
      5. ↑ https://www.youtube.com/watch?v=4djSAHb8b4A&feature=youtu.be&t=1m15s
      6. ↑ https://www.youtube.com/watch?v=4djSAHb8b4A&feature=youtu.be&t=1m27s
      7. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=1m32s
      8. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=1m42s
      9. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=2m25s
      1. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=2m51s
      2. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=3m
      3. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=3m10s
      4. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=3m25s
      5. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=4m7s
      6. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=4m15s
      7. ↑ https://www.youtube.com/watch?v=FzTUxDVGHVA&feature=youtu.be&t=5m30s
      8. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=35s
      9. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=40s
      10. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=45s
      11. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=50s
      12. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=1m5s
      13. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=1m16s
      14. ↑ https://www.youtube.com/watch?v=n9LzgGVxEZY&feature=youtu.be&t=1m40s
      15. ↑ https://gizmodo.com/how-to-tie-the-only-five-knots-youll-ever-need-1696628878
      16. ↑ https://backpackingmastery.com/skills/paracord-knots.html

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 92,167 times.

      Did this article help you?

      Advertisement