Download Article
Fix loose Beats by Dre headphones by tightening the hinges
Download Article
One of the most common issues that people may encounter when using Beats by Dre headphones is its loose hinges. It happens mostly as the headphone gets used, but there are certain instances too where the hinges are already loose right off the box. If you’ve been experiencing the same issue with your headphone, you can tighten your Beats by Dre using a simple trick.
Things You Should Know
- You'll need long-nose pliers to do this job.
- Expose the hinges by extending the ear cups.
- Then use your long-nose pliers to lift the pin toward the headband to tighten it.
Steps
-
Get the tools you need. You’ll only need long-nose pliers for this. If you don’t have one, you can purchase it for under $5 from your local hardware store.
- You can also use any item with a durable, pointed metal tip if you don’t want to spend money on the tool.
-
Expose the hinges. Take your Beats by Dre headphones and expose the hinges by extending the ear muffs away from the headband.Advertisement
-
Locate the pin of the hinge. Right on the point where the arms of the ear muffs are joining the headband, you’ll see a short metal rod. This is the pin of the hinge.
-
Tighten the hinge. Get your long nose pliers and gently lift both ends of the metal rod/pin toward the headband one at a time. This will tighten the hinge and keep it from wiggling around.
- Be careful not to damage the metal arm where the pin is place and the plastic part of the headband. Bend only the tip of the pin and not its entire body. Don’t pull the pin off of the metal arm too. Do the same to other arm if it’s also loose. [1] X Research source
Advertisement
-
Extend the arms of the ear muffs. Pull the ear muffs away from the headband and extend it as long as it can go.
-
Fold out the arms. Spread out the earmuffs away from the body as if you’re going to put it on. Hold it by the headband and gently shake it to see if the headphone will hold its position.
-
Tighten it more. If the earmuffs fold back into position just by gently shaking it, repeat Part 1 and tighten the Beats by Dre a little bit more.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
References
About This Article
Thanks to all authors for creating a page that has been read 87,707 times.
Advertisement
