How to Wear Bra Inserts

PDF download Download Article
PDF download Download Article

Bra inserts are removable pads that add extra lift, definition, shape, and coverage. If you want a natural boost, some additional coverage, enhanced cleavage, or an added cup size, select a set of inserts in either cotton, polyester, or silicone materials. Slide them into your bra or bathing suit, and you’ll instantly notice the difference!

Method 1
Method 1 of 4:

Selection

PDF download Download Article
  1. If you want to add just a little extra lift and definition but don’t need a full cup size difference, go for bra pads that line the bottom of your bust. They offer a natural appearance while still adding fullness. Typically, these come in 1 size, though you can also find them in sizes small, medium, or large.
    • These are great for formal wear and day-to-day bras.
    • You can also use these in sports bras if you want a little extra coverage. These are not recommended for bathing suits, as they aren't full size.
    • These usually come in round or oblong shapes.
  2. 2
    Go with bust enhancer pads if you have a smaller or asymmetrical bust. Shop for pads that are labeled as “bust enhancer pads,” or something similar. Opt for 2 pads if you’d like to make your bust look a little bigger, or use a single pad to even out your bust. [1]
    • These pads usually provide complete coverage.
  3. For voluptuous, sexy looks, consider using push-up pads. These slide into your bra and provide full-coverage lift and definition. You can purchase your push-up inserts based on your bra size. [2]
    • Push-up inserts go great with nightlife outfits or date night!
    • Full-size inserts are triangular in shape.
  4. Silicone inserts are squishy plastic pads you add to the bottom of your bra for increased shape, lift, and cleavage. Their thick base helps lift your breasts up and forward for the ultimate addition to your bra. Typically, these come in 1 uniform size. [3]
    • They can add up to a cup size!
    • Silicone inserts come in round or half-moon shapes. They are usually transparent.
  5. Instead of purchasing inserts, you can use the ones you already own. Most bathing suit tops have removable pads secured by a small flap of fabric. Some sports bras also come with removable padding. To remove your inserts, separate both layers of fabric from the bra or bathing suit, and pull out the insert. [4]
    • You can always put it back in your swimsuit or bra later.
Method 2
Method 2 of 4:

Placement & Position

PDF download Download Article
  1. Put on your bra . Fasten the band of your bra to a comfortable size, and slip your straps over your shoulders. [5]
    • You will add your inserts to your bra after it is on your body.
  2. Pull the cup of your bra forward, and place an insert inside. Then, do this for the other cup. The thickest part of the insert should be at the bottom of your breast. [6]
    • Adjust it into place so it fits comfortably on top of the bottom band of your bra.
    • The insert will sit between your bra and your skin.
    • If you don't want your insert to shift around, try holding it in place with double-stick fashion place. You can also double-up with a safety pin or even sew them into place, if you'd like. [7]
  3. After your inserts are situated, get dressed and check yourself out in the mirror. Look at the sides and shape of your breasts, and adjust your inserts if you need to. If one side looks fuller than the other, adjust the inserts so both sit completely under your bust. These should stay in place all day. but you should double-check throughout the day just in case. [8]
    • Check out how great you look!
Method 3
Method 3 of 4:

Inserts for Swimwear

PDF download Download Article
  1. For most bathing suits, the opening begins along your bust line, usually placed at the outer corner of your top towards your arms. Lay your bathing suit top on a flat surface, and run your fingers along the bust line to locate the opening. [9]
  2. If your bathing suit does not have an opening, that’s okay! Grab a pair of scissors, and cut a slit about 1–2 inches (2.5–5.1 cm) wide in the lining of your suit along your bust line. Make sure you only cut the lining of your top, not the actual bathing suit itself. [10]
    • To cut discreet holes, you can make your cuts on the corner closest to your underarm. Cut them along the bottom band of your bathing suit top.
  3. You can lightly squeeze the sides of the inserts, and push them into the opening or the slit you cut. Your inserts will stay in place because they are larger than the size of your slits. [11]
    • If using full-size inserts, fold them in half before you insert them and let them unfold into full shape when they are inside.
  4. Use your fingers to slide around the insert so it is flush with your bathing suit top.
    • If you have full-size inserts, position the triangle shape so it aligns correctly with the shape of your top.
    • If using half-size inserts, they should line the bottom of your bathing suit.
  5. After you slip the inserts into the liner, thread a sewing needle so you can stitch up the hole you cut. Pierce your needle through the lining at the edge of your slit, and pull your needle through to the other side of the lining. This is how you can make your stitches . Then, bring your needle back through the top to repair the small hole you cut.
    • Make your stitches starting at the beginning of the slit, and tie a knot at the end of your thread when you reach the end.
    • While this is not required, it will help keep your insert securely in your top.
    • This applies for both bathing suits that have openings and those that you cut yourself.
Method 4
Method 4 of 4:

Care & Cleaning

PDF download Download Article
  1. To keep your inserts clean, it is best to wash them after each time you wear them. [12]
    • Cotton or polyester inserts can be washed with your other clothing, but silicone inserts must be hand washed.
  2. Bra pads made of cotton or polyester can easily go into your wash. Rinse your clothes on a gentle cycle with mild detergent, and you can wash them with similar colors. [13]
    • You can throw them into a lingerie bag and wash them with your bras if you’d like.
    • If you put your inserts inside your bathing suit, you can wash the top with the inserts inside.
  3. When you are ready to wash your silicone inserts, hold your inserts under running warm water. Apply hand or dish soap to a washcloth, and clean the cups in a circular motion. Rinse off any remaining soap and water. [14]
    • Use a dime-sized amount of soap to wash your inserts. This should be plenty to use for both of them.
  4. Rather than machine drying your inserts, leave both your cloth and silicone inserts out to dry. If the inserts are folded or shaped oddly after the wash, you can reshape them with your hands before you lay them to dry. Silicone inserts will dry in about 30 minutes, and you can use a towel to pat them dry. Cloth inserts will dry in 2-4 hours. [15]
    • You can clip your inserts to a drying rack or leave them lying on a flat surface.

Expert Q&A

Search
Add New Question
  • Question
    How do you keep bra inserts in place?
    Katie Quinn
    Image Consultant
    Katie Quinn is an Image Consultant, Personal Wardrobe Stylist and the Founder of Q the Stylist, an image consulting service based in New York City helping men and women understand their specific goals, improve their wardrobe, performance, and life. She has over 11 years of image consulting experience and has worked as a stylist for Trunk Club, Modewalk, and Moda Operandi. Her work has been featured in Vogue, InStyle, Martha Stewart Weddings, Sheridan Road, Slate, Newsy, Rue, and Thrillist.
    Katie Quinn
    Image Consultant
    Expert Answer
    Use double-stick fashion tape to help keep your bra inserts in place. If you're going to be wearing them for a long time, you might want to double up with a safety pin. If you wear your bra inserts every day, I would suggest hand-sewing them in or getting a bra where they're already built in.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 7
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Accentuate Cleavage
      How to
      Show Cleavage With Small Breasts
      How to
      Deal with Having a Flat Chest
      Measuring Bra Size at Home: A Complete Guide
      How to
      Unhook a Bra
      5 Hacks to Turn a Regular Bra into a Strapless Bra
      How to
      Know when You're Ready for a Bra
      How to
      Adjust Bra Straps
      How to
      Dress With No Bra
      How to
      Undo a Bra One Handed
      How to
      Stuff Your Bra
      How to
      Fix Your Bra’s Wire and Keep It from Poking through Again
      How to
      Easily Hide Your Bra Straps Using Bobby Pins
      How to
      Wear a Bra Properly

      References

      1. ↑ https://www.swimoutlet.com/guides/how-to-choose-a-bra-pad
      2. ↑ https://www.swimoutlet.com/guides/how-to-choose-a-bra-pad
      3. ↑ https://youtu.be/zztd4cc9h-M?t=12s
      4. ↑ https://youtu.be/0SeSHxd53AA?t=4m12s
      5. ↑ https://youtu.be/bbs1G5wQMfU?t=43s
      6. ↑ https://youtu.be/bbs1G5wQMfU?t=42s
      7. ↑ Katie Quinn. Stylist. Personal interview. 8 May 2020.
      8. ↑ https://youtu.be/bbs1G5wQMfU?t=47s
      9. ↑ https://youtu.be/WOVyF_MB7GI?t=32s
      1. ↑ https://youtu.be/WOVyF_MB7GI?t=32s
      2. ↑ https://youtu.be/WOVyF_MB7GI?t=38s
      3. ↑ https://www.jezebel.com/the-great-bra-washing-extravaganza-509259173
      4. ↑ https://www.jezebel.com/the-great-bra-washing-extravaganza-509259173
      5. ↑ https://www.jezebel.com/the-great-bra-washing-extravaganza-509259173
      6. ↑ https://www.jezebel.com/the-great-bra-washing-extravaganza-509259173

      About This Article

      Article Summary X

      Bra inserts are removable pads that add a little extra lift and definition. To put them in, first, put on your bra. Then, slip the inserts into both cups so they sit near the bottom. Make sure that the thickest part of the insert sits near the bottom of your bra for proper support. Put your shirt back on to check the placement, then you can adjust them if needed. If you want to put inserts into swimwear, locate the opening in the lining, which should be on the outer corner of the inside of the cup. Fold the insert in half before sliding it into the cup. Then unfold them when they’re inside. To learn which type of bra inserts will work best for you, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 187,813 times.

      Reader Success Stories

      • Kayleen Benter

        Oct 17, 2022

        "I crochet for fun. My granddaughter wanted a crochet bralette. Some crochet patterns show pads sewed into the bra. ..." more
      Share your story

      Did this article help you?