PDF download Download Article
Turn shower time back into a quieter experience with this easy guide
PDF download Download Article

If your toilet makes a gargling noise randomly when you take a shower, you may be wondering what’s going on. Luckily, this is normally a pretty mundane problem, but it is something you should address before things get out of hand. In this article, we’ll explain why you hear toilet bubbling when the shower is running or after the water drains and break down what you can do to fix this problem.

This article is based off an interview with our award-winning professional plumber, David Balkan, CEO of Balkan Sewer and Water Main Service. Check out the full interview here.

Things You Should Know

  • Bubbling is a sign that air is trapped in your drains. This is usually due to a blockage in the drainage pipes, vent stack, or sewer main.
  • Stuff your shower drain with a cloth and then plunge the toilet. If that doesn’t work, snake the toilet with a drain auger .
  • Contact a roofer if you think the vent stack is the issue. If the sewer main is at fault, call your city’s water department.
Section 1 of 3:

Possible Reasons Your Toilet is Bubbling

PDF download Download Article
  1. This is the most common reason you’d be hearing bubbling coming up every time you shower. Your toilet and shower drains are close to one another, so the pipes link up under the bathroom floor. But if something is stuck in the drain pipe, the water in the shower won’t have anywhere to go and it’ll push air up through your toilet’s drain. [1]
  2. If there’s a blockage in your home’s main sewer line where the drains all link up, it can do all kinds of funny things to your home’s plumbing. One of the main symptoms will undoubtedly be a gargling sound when you’re running the shower. [2]
    Advertisement
  3. The vent stack introduces air into your plumbing system so that the water can drain freely. However, if there’s a dead bird or a bundle of leaves in the vent stack, it can make it difficult for the water to drain appropriately. This can lead to bubbling sounds when you shower. [3]
    • If you can see your roof, look for a PVC pipe that’s just sticking up out of the air. That’s your vent stack.
  4. If you’re in a newer building, this is a sign that the plumbing was installed incorrectly. It could be that there isn’t adequate pressure in the pipes, or that gravity isn’t working as intended because the pipes are installed at the wrong angle. [4] Hire a plumber or contact your home builder to get this problem diagnosed and resolved. This isn’t a DIY job.
  5. Advertisement
Section 2 of 3:

Diagnosing the Issue

PDF download Download Article
  1. The fact that your toilet is bubbling specifically and you’re noticing it is a good sign that your main problem is connected to the toilet drain. If there are no other symptoms elsewhere with your plumbing, the odds are very high that the problem is in (or very close) to your toilet. [5]
    • It’s possible there’s a blockage in your shower drain pipe and it’s pushing air up through the nearby toilet. However, you’d probably notice the water draining a little slowly in the shower, first.
  2. If the vent stack has a blockage, you’re going to notice problems elsewhere, since your entire plumbing system will rely on that vent stack. Run water in your other bathrooms, sinks, or hose connections to see if the water is working correctly. You may notice: [6]
    • Gurgling sounds in other drains or toilets.
    • Slow water draining.
    • A strong sewage odor coming from drains when no water is running.
    • Drains that clog repeatedly even when you clear the blockages.
  3. If you’re friendly with any of your neighbors and you’ve got their phone number, ring them up to casually ask if they’re running into any weird plumbing issues. If they are, there’s probably something going on with your block’s sewage main. Call your city’s water management department to report the issue.
    • It could be that the main sewage pipe is clogged up, there’s a problem with the city’s water service in general, or the sewage pipe is broken.
  4. Advertisement
Section 3 of 3:

Solving the Problem

PDF download Download Article
  1. Cover your shower drain with tape or stuff a rag inside of the opening. Then, plunge your toilet like it’s clogged for 1-2 minutes. Then, try running your shower to see if the bubbling goes away. If it was just a minor block up, you may get lucky and fix it with a quick plunging.
    • Covering the drain is important because you’ll artificially increase the pressure in both the toilet and shower. This gives the plunger the leverage it would normally need to push the blockage down.
  2. Cover your shower drain and snake the toilet with a drain auger . Stick duct tape over the shower drain or stuff a rag inside the opening. Then, grab a drain auger and insert the end in your toilet bowl. Crank the handle on your auger to push the snake down the pipe. Continue until you reach resistance and find your blockage. Then, push the end of the auger a little further until the blockage frees up and retract your snake. [7]
    • If the problem persists, try snaking your shower drain. The blockage might actually be in that pipe.
    • If you don’t feel resistance anywhere and you fully extend the snake all the way, the problem is probably elsewhere.
  3. The vent stack is the PVC pipe that just sticks up from your roof. Contact a local roofer (or a plumber with a roofing license, if you can find one) and explain that you think you’ve got blockage in your vent stack. They’ll get up on your roof and either snake the pipe or resolve the problem for you. [8]
    • Animals get stuck and die in these pipes or leaves can fall in and buildup, so this isn’t a particularly rare problem.
    • You can snake the vent stack yourself if you have roof access and a flat roof. But if you don’t, do not attempt this yourself.
    • If you’re up on the flat roof, bring a flashlight and look in the vent pipe (it’ll be a 4–6 in (10–15 cm) wide PVC pipe). If you can reach inside to remove the blockage, do that. Otherwise, snake it with a drain auger like a normal drain.
  4. You won’t be able to fix any issues with your city’s sewage line—they just don’t make commercial drain augers that reach that far, and you won’t be able to fix the problem most of the time anyway. Call your water department to report the problem. They’ll send a crew out to inspect your sewage line.
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 29,802 times.

      Did this article help you?

      Advertisement