PDF download Download Article PDF download Download Article

Zigzag edges are a great way to secure a hem, but they can also be helpful for preventing a piece of fabric from fraying. You can easily add zigzag edges to your sewing project using a sewing machine. No special equipment is required, but an overcast foot can be helpful for getting the zigzag stitches right on the edge of your fabric. Try adding zigzag edging to your next sewing project for strong seams and reinforced edges.

Method 1
Method 1 of 2:

Securing Edges With the ZigZag Stitch

PDF download Download Article
  1. Thread your sewing machine with your desired type of thread. When using the zigzag stitch, you may choose to use a thread color that matches your fabric or that contrasts with it. This is based on your personal preference. [1]
    • For example, you might decide to finish the edges of a red piece of fabric with white thread for contrast, or go with a red thread that will match the fabric and blend in.
  2. The zigzag stitch is a common one, so all sewing machines will have a zigzag stitch setting. Set your machine to the zigzag stitch setting before you begin sewing. [2] [3]
    • It is fine to keep the defaults in place for the zigzag stitch on your machine. If your machine does not automatically adjust the width and length of the stitch for you, then start with a stitch length of 1.4 and a stitch width of 5.0.
    • Switch out your traditional sewing machine foot with a "zigzag" foot. This can prevent your needle from breaking. [4]
    Advertisement
  3. When your machine is set, raise up your presser foot using the presser foot lever. Then, place your fabric under the presser foot. Make sure that the fabric is positioned so that the edge of the fabric will be lined up with the sewing area (where the needle comes down) on the presser foot. [5]
  4. When you are happy with the placement of your fabric, lower the presser foot using the presser foot lever and begin sewing. Start by using light pressure on the pedal and check the stitches to see if they are coming out how you want them to. [6]
    • If you are unhappy with the placement of the stitches, then stop the machine and adjust the position of the fabric.
    • If you are unhappy with the length and/or width of the stitches, then adjust the length and/or width to your liking.
  5. Unless you are using the zigzag stitch for a hem, it is a good idea to trim away the excess fabric after you stitch the edge of the fabric. This will help to reduce fraying when you wash and wear the garment. Trim along the edge of the zigzag stitch, but be careful not to cut into the stitching. [7]
  6. Advertisement
Method 2
Method 2 of 2:

Getting the Best Results

PDF download Download Article
  1. A useful tool for stitching the edges of fabric is an overcast foot. This makes it easy to line up the stitch so that it is right on the edge of your fabric. If you have an overcast foot, then use it in place of your regular presser foot for this project. [8]
    • Keep in mind that an overcast foot is optional. You can also zigzag stitch along the edges of fabric without one.
  2. The length and width of your stitches will change the way your zigzags look. If you are not sure how you want your zigzags to look, then try experimenting on some scrap fabric before you begin sewing your project. Try short, medium and long lengths and widths to find a zigzag setting that you like.
    • It may be helpful to write each setting directly onto the scrap fabric so you know what each one will look like. This will make it easier to decide on a preferred setting and serve as a helpful reference for future projects.
  3. The zigzag stitch can be useful as a way to create a hem on a finished skirt, shirt, or other project. The zigzag edge that you sew into the hem will be decorative and functional. However, finishing raw edges with the zigzag stitch is also a good strategy. [9] The zigzag stitching will help to prevent the edges of your finished product from fraying from normal wash and wear.
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you zigzag on a sewing machine?
    Seleh Rahman
    Professional Tailor & Furrier
    Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.
    Professional Tailor & Furrier
    Expert Answer
    Adjust the dial on your sewing machine until it's on the zigzag setting. Some machines might have 4 or 5 different zigzag varieties to choose from.
  • Question
    How do I stop my sewing machine needle from breaking?
    Seleh Rahman
    Professional Tailor & Furrier
    Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.
    Professional Tailor & Furrier
    Expert Answer
    Use a specific "zigzag foot" for your sewing machine instead of your usual kind. You'll end up breaking the needle if you use a traditional sewing machine foot with the zigzag setting.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 30,972 times.

      Reader Success Stories

      • Annabel Dack

        Aug 2, 2021

        "This explanation was really helpful. Clear, simple instructions and matching diagrams give me the confidence to ..." more
      Share your story

      Did this article help you?

      Advertisement