How to Change a Crank

PDF download Download Article
PDF download Download Article

A bike's cranks must be properly maintained to keep your bike operational. These are the arms connected to the Bottom Bracket (consisting of axle, bearings, etc.) via the axle(usually square on the ends). If you need to change your cranks, you can do so as long as you have the proper tools. First, you’ll need to detach the pedals from the crank. Then, you’ll need to use an Allen key to remove the center bolt from the crank before replacing it. You can use this process to replace Shimano two-piece, SRAM self-extracting two-piece, and three-piece cranks.

Part 1
Part 1 of 3:

Detaching the Pedals

PDF download Download Article
  1. The crank arm is the elongated piece that connects the pedals to the crank. Fit the wrench around the rod that connects the crank arm and pedal. Then, turn the wrench counterclockwise 2-3 times to loosen it from the crank arm. [1]
    • When the pedal is loosened it should freely rotate on the crank’s bolt.
  2. Hold the pedal and rotate the crank arm clockwise. Continue rotating the crank around until the pedal detaches from the crank arm. [2]
    • You should be able to feel the pedal unthreading from the crank arm as you rotate it.
    • It may take 10-30 full rotations of the crank to remove the pedal.
    Advertisement
  3. The left pedal is reverse-threaded. Use a 15mm wrench to loosen the left pedal from the bike. Then, hold the left pedal and rotate the crank arm to completely detach it from the bike. Both pedals should now be completely removed. [3]
    • If you're standing on the right, or drive side, of the bike, rotate the crank arm clockwise. If you're standing on the left, or non-drive side, of the bike, rotate the crank arm counterclockwise.
    • Set the pedals aside in a safe place so that you can reattach them once you’re done replacing the crank.
    4. Advertisement
Part 2
Part 2 of 3:

Removing the Crank

PDF download Download Article
  1. Some cranks will have a metal or plastic cap that fits over the bolt on the crank. If your crank has one, fit a screwdriver under the edge of the cap and pop it out of its fitting. This will reveal the crank bolt. [4]
    • The crank bolt will be in the center of the crank and looks like a hexagon.
  2. Some cranks will have pinch bolts, or 2 smaller bolts, near the top of the crank arm. If your crank has these, insert a 5mm Allen key into the holes at the top of the arm and rotate the key counterclockwise. [5]
    • Loosening the pinch bolts will allow you to remove the crank arm from the rest of the crankset.
    • The 2-bolt design is for Shimano cranks. For this type of crank, you also need to remove the plastic pre-load screw on the left, or non-drive, side of the bike.
    • Not all cranks have these pinch bolts. If your crank doesn’t, skip this step.
  3. Turn the handle of the Allen key counterclockwise to loosen the crank bolt. Then use it to completely unscrew the crank bolt. [6]
    • If your crank has bolts on both sides of the bike, go to the other side of the bike and remove the other crank bolt.
    • Most cranks require a 4mm-8mm Allen key. Look in the bike's user manual or on the bike manufacturer’s website to find out which size will fit your bike.
    • An Allen key is also called an Allen wrench or a hex key. You can find them at bike shops and hardware stores.
  4. Pull the crank arm away from the bike to remove it from the rest of the crank. [7] Then, slide the other side of the crank out of the bottom bracket. Pull the rest of the crank away from the bike to slide it out of the bottom bracket. [8]
    • If you have rubber washers around the spindles, slide them off before installing your new cranks.
    • You don't need a crank extractor tool for self-extracting cranks.
    • You’ll know if you have a self-extracting crank if the crank only has 1 crank bolt on 1 side of the bike with a retaining ring around it.
  5. Purchase a crank extractor tool from a bike store or online. Insert the crank extractor into the crank-bolt hole and turn it clockwise to screw it in until it's tight. Then, turn the handle of the extractor counterclockwise until the crank pops off. Go over to the other side of the bike and remove the other side of the crank in the same way. [9]
    • Crank extractors are needed on non-self-extracting cranks. These types of cranks have a crank bolt on each side of the bike and do not have a retaining ring around the crank bolt.
    6. Advertisement
Part 3
Part 3 of 3:

Installing New Cranks and Reinstalling the Pedals

PDF download Download Article
  1. If you have washers, place them around the crank spindle before installing the cranks. Push the right side of the crankset onto the right spindle and wrap the chain around the crank’s chainring so that it's between the bike and crankset. [10]
    • Wrap the chain so that it runs from the back gears to the chainring on the crankset.
  2. Jiggle the left crank arm and push it all the way down the spindle. If either side of the crank isn’t going all the way down the spindle, tap on it with a rubber mallet to push it into place. [11]
  3. Place the crank bolts back into their sockets. Then, use the Allen key that you used to uninstall the old cranks to screw in the new crank bolt. Continue turning each crank bolt clockwise until you can’t anymore. [12]
  4. If your crank bolt has a plastic compression cap that goes over it, place the cap over the center of the bolt and push down to pop it into place. Tighten the cap to the recommended torque, which is typically 5 Newton meters. If your crank has pinch bolts, turn them clockwise with a 5mm Allen key to tighten them and secure the crank to the bike. Tighten them to the manufacturer's specifications, which is generally around 15 Newton meters.
    • Self-extracting cranks do not have pinch bolts.
  5. Place a pedal into its socket and start turning the crank counterclockwise. This is an easy way to screw the pedal back onto the bike. Go over to the other side of the bike and repeat the process. Continue screwing the pedals into the crank arm until they are tight. [13]
    • Most pedals will have an engraving that reads “R” and “L” for right and left. This will help you determine which pedal goes on which side.
    • Make sure that the threads of the pedals match with the groves on your crank arm so that you don’t strip the threads.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I remove the bike crankshaft?
    Ikaika Cox
    Bicycle Mechanic
    Ikaika Cox is the Shop Director at the Salt Lake City branch Bicycle Collective in Salt Lake City, Utah. He has been a bike mechanic since 2012, beginning as a volunteer with the Provo Bicycle Collective, and growing and honing his skills as a bicycle mechanic and educator in multiple Bicycle Collective locations over the years. He now leads the Salt Lake City branch of the Bicycle Collective.
    Ikaika Cox
    Bicycle Mechanic
    Expert Answer
    Bicycles don't have crankshafts. If you need to know how to remove the crank, this article teaches you how to do so.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 22 Helpful 11
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You’ll Need

      • 15mm wrench
      • Screwdriver
      • Allen key
      • Crank extractor

      Tips

      • If the arm stripped out, try cutting it off with a disk grinder. The arm is not really salvageable anyways. Don't pound on it if you can avoid this, as you can cause damage/maladjustment to the crankset bearings or other other parts. Take care to avoid hitting the spindles during this step as this can affect the installation of the replacement crank arm.
        Thanks
        Helpful 0 Not Helpful 0
      • As you begin to crank on the extractor, pay close attention to the threads. This should not take more than a turn of the crank or 2 to release. If you see separation of threads even in the slightest, stop. You may need to take other measures to loosen the arm (like riding the bike without the bolt in) before trying again.
        Thanks
        Helpful 0 Not Helpful 0
      • Stripping out the threads on both extractor and crank arm is common, especially on the gear arm and older bikes. Take precautions before starting extraction including: heat up the arm with heat gun, clean and dry threads on extractor & arm with alcohol or similar chemical, ensure extractor is fully inserted(screwed in) before beginning to force the components apart, carefully insert 3 or more wedges behind the arm/gears before beginning separation.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Adjust Disc Brakes on a Bike
      How to
      Remove Rust from a Bike
      How to
      Remove and Replace Bike Pedals
      How to
      Adjust a Rear Bicycle Derailleur
      How to
      Replace a Bike Hub
      How to
      Fix an Exercise Bike
      How to
      Break a Chain
      How to
      Take the Pedals Off a Bike
      How to
      Replace Road Bike Brakes
      How to
      Grease Bicycle Wheel Bearings
      How to
      Adjust a Spinning Bike
      How to
      Stop a Bicycle Rim from Wobbling
      How to
      Fix Bike Gear Wire
      How to
      Adjust a Front Bicycle Derailleur
      Advertisement

      References

      1. ↑ https://youtu.be/8B6LdZPa4M8?t=35s
      2. ↑ https://youtu.be/8B6LdZPa4M8
      3. ↑ https://youtu.be/8B6LdZPa4M8?t=55s
      4. ↑ https://www.bikeradar.com/advice/workshop/how-to-replace-a-crankset/
      5. ↑ https://www.bikeradar.com/advice/workshop/how-to-replace-a-crankset/
      6. ↑ https://www.bikeradar.com/advice/workshop/how-to-replace-a-crankset/
      7. ↑ https://www.bikeradar.com/advice/workshop/how-to-replace-a-crankset/
      8. ↑ https://youtu.be/mxAj-zbynPI?t=2m36s
      9. ↑ https://youtu.be/8B6LdZPa4M8?t=1m40s
      1. ↑ https://youtu.be/8B6LdZPa4M8?t=3m11s
      2. ↑ https://youtu.be/8B6LdZPa4M8?t=3m17s
      3. ↑ https://youtu.be/8B6LdZPa4M8?t=3m26s
      4. ↑ https://youtu.be/8B6LdZPa4M8?t=4m50s

      About This Article

      Article Summary X

      Cranks are the arms that hold your bike’s pedals. To change your bike’s cranks, you’ll need a 15 millimeter wrench, Allen keys, and a crank extractor tool. The first thing you'll need to do is remove the bike pedals using the wrench. Once the pedals are off, you can unscrew the bolts in the middle of the sprocket and take the cranks off. If you can't see any bolts, remove the cap to expose them. Unless your bike has self-extracting cranks, you’ll need a crank extractor tool to slide the cranks off its spindle. Once you've removed the cranks, all you'll have to do is attach the new cranks and put the pedals back on. For more tips, including how to remove 2-bolt Shimano cranks, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 357,040 times.

      Did this article help you?

      Advertisement