Download Article
Download Article
- On Windows |
- On Mac OS X |
- Video |
- Tips |
- Warnings
This wikiHow teaches you how to connect a second monitor to your laptop or desktop computer. Setting up a second monitor is possible on both Windows and Mac computers, but you'll need to make sure that your computer supports multiple displays before doing so.
Steps
-
Make sure your computer can support multiple displays. This isn't usually an issue for laptop computers, but your desktop computer may not meet the requirements for adding a second monitor: [1] X Research source
- Laptop — If your laptop has at least one video output port, you can use it to connect a second monitor.
- Desktop — Your desktop computer must have at least two video ports in total (one to connect the primary monitor and one to connect the second monitor). The ports do not have to match, but they do have to be a part of the same graphics card; this means that if you have two graphics cards installed, you'll need to use the same one for both monitors.
EXPERT TIPComputer & Tech SpecialistLuigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.Our Expert Agrees: Just because your onboard video card has 2 connections doesn't mean it supports 2 monitors. For instance, if it's DVI and VGA, you can only pick one. [2] X Research source To use dual monitors, you have to have a secondary card in an AGP slot or PCI Express slot.
-
Identify your computer's video output port. Video output ports are found on the side of your laptop or, if you're using a desktop computer, on the back of the tower next to the port into which your primary monitor is plugged. Common output ports include the following:
- HDMI — Resembles a six-sided, flat port.
- DisplayPort — Resembles a rectangular port with a crimped side.
- USB-C — Resembles a thin, rounded oval port.
- VGA — Resembles a colored trapezoid with pinholes in it. VGA isn't common on post-2012 computers, but you may have to work with VGA if you're connecting a new computer to an old monitor (or vice versa).
Advertisement -
Find your monitor's video input port. Modern monitors tend to use either DisplayPort or HDMI ports for their inputs, but some monitors will also have VGA ports.
- If you have an exceptionally old monitor, you may find a DVI port on the back of your second monitor. DVI ports resemble white boxes with clusters of holes, as well as a section with a few separate holes.
-
Buy a cable to connect your monitor to your computer if necessary. If you don't have a cable which can connect your computer to your monitor (e.g., an HDMI cable), you'll need to buy one. [3] X Research source
- If your computer and your monitor both have a common port (e.g., HDMI), it's easier (and cheaper) to buy a cable that fits both ports even if a higher-definition option is available.
- If the monitor's input doesn't match your computer's output (e.g., if the monitor uses a VGA input while your computer uses an HDMI output), you will need to buy an adapter.
- Some video output combinations, such as HDMI to DisplayPort, come as cables that you can purchase instead of buying an adapter.
-
Plug one end of the cable into your computer. The cable should plug into your computer's video output port.
- Remember, if you're using a desktop computer, this must be a video output port that is part of the same graphics card that your primary monitor uses.
-
Plug the other end of the cable into your monitor. The free end of the cable should fit into your selected port on the back of the monitor.
- If you're using an adapter, you'll plug one end of the cable into the adapter and then plug the monitor's cable into both the monitor and the adapter.
-
Power on the monitor. If your monitor isn't plugged into a power source, attach it via the included power cable; you can then press the Power button on the monitor to turn it on.
- Depending on your computer, you may see your desktop reflected on the second monitor when it turns on.
-
Open Start . Click the Windows logo in the bottom-left corner of the screen.
-
Open Settings . Click the gear-shaped icon in the lower-left side of the Start window. This will open the Settings window. [4] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
Click System . It's a screen-shaped icon in the upper-left side of the window.
-
Click Display . This tab is in the upper-left corner of the window.
-
Scroll down and click the "Multiple displays" drop-down box. It's the box below the "Multiple displays" heading near the bottom of the page. Doing so will prompt a drop-down menu.
-
Select a display option. Depending on what you want your second monitor to do, click one of the following options:
- Duplicate these displays — Copies everything that's on your computer's primary display to the second monitor.
- Extend these displays — Creates an extension of your desktop on the second monitor. This essentially gives you more space with which to work.
- Show only on 1 — Blacks out the second monitor and shows content only on the first monitor.
- Show only on 2 — Blacks out the first monitor and shows content only on the second monitor.
- Depending on your computer, you may have additional options here.
EXPERT TIPComputer & Tech SpecialistLuigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.Adjust your settings so the monitors appear the way they do in front of you. When you go into your Control Panel settings, go into Display, then select exactly where each one of the monitors are. You can then drag the monitors around and pu them in exactly the orientation they are in your screen. If one's 2 inches higher than the other one, you would put it 2 inches higher, for instance. [5] X Research source That way, the mouse will go across properly.
Advertisement
-
Know which Macs you can use. All Macs support at least one additional monitor, though some Macs only have one available port to share between charging, file transfers, and external displays. If you have a MacBook laptop with only one port, make sure that your computer is fully charged and disconnected from any peripherals (e.g., USB flash drives) before attempting to connect another monitor. [6] X Research source
-
Find your Mac's video output port. Depending on your Mac, you'll find one (or more) of the following ports on the side of your Mac (MacBook and MacBook Pro) or on the back of your Mac (iMac):
- USB-C (Thunderbolt 3) — Oval-shaped port. Modern MacBooks, MacBook Pros, and iMacs have anywhere from one to four of these.
- Thunderbolt 2 — Square-shaped port. Found on older Macs.
- HDMI — Six-sided, flat port. Found on older Macs. [7] X Research source
-
Find your monitor's video input port. Modern monitors tend to use either DisplayPort or HDMI ports for their inputs, but some monitors will also have VGA ports.
- If you have an exceptionally old monitor, you may find a DVI port on the back of your second monitor. DVI ports resemble white boxes with clusters of holes, as well as a section with a few separate holes.
-
Buy a cable to connect your monitor to your computer if necessary. If you don't have a cable which can connect your computer to your monitor (e.g., an HDMI cable), you'll need to buy one.
- If your computer and your monitor both have a common port (e.g., HDMI), it's easier (and cheaper) to buy a cable that fits both ports even if a higher-definition option is available.
- If the monitor's input doesn't match your computer's output (e.g., if the monitor uses a VGA input while your computer uses an HDMI output), you will need to buy an adapter.
- Some video output combinations, such as HDMI to DisplayPort, come as cables that you can purchase instead of buying an adapter.
-
Plug one end of the cable into your computer. The cable should plug into your computer's video output port. [8] X Research source
-
Plug the other end of the cable into your monitor. The free end of the cable should fit into your selected port on the back of the monitor.
- If you're using an adapter, you'll plug one end of the cable into the adapter and then plug the monitor's cable into both the monitor and the adapter.
-
Power on the monitor. If your monitor isn't plugged into a power source, attach it via the included power cable; you can then press the Power button on the monitor to turn it on.
- Depending on your computer, you may see your desktop reflected on the second monitor when it turns on.
-
Open the Apple menu . Click the Apple logo in the top-left corner of the screen. A drop-down menu will appear.
-
Click System Preferences… . You'll find this option in the drop-down menu. Doing so opens the System Preferences window.
-
Click Displays . It's a screen-shaped icon in the System Preferences window. A pop-up window will open.
-
Extend your desktop to the second display. If you want to use the second monitor as an extension of your desktop, uncheck the "Mirror displays" box at the bottom of the window. [10] X Research source
- If you just want your second monitor to mirror whatever is on your Mac's primary monitor, skip this step.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- It's often cheaper to buy cables online than in stores.Thanks
- When using a second monitor to extend your primary monitor, pushing your mouse all the way to the right of the first monitor will place the mouse on the second monitor.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If your computer doesn't accept multiple displays, you'll need to install a graphics card that has a minimum of two video outputs in order to use multiple displays.Thanks
Advertisement
References
- ↑ https://www.geeksforgeeks.org/how-to-connect-two-monitors/
- ↑ https://www.geeksforgeeks.org/how-to-connect-two-monitors/
- ↑ https://www.geeksforgeeks.org/how-to-connect-two-monitors/
- ↑ https://support.microsoft.com/en-us/windows/set-up-dual-monitors-on-windows-3d5c15dc-cc63-d850-aeb6-b41778147554
- ↑ https://www.geeksforgeeks.org/how-to-connect-two-monitors/
- ↑ https://support.apple.com/guide/mac-help/connect-an-external-display-mchl7c7ebe08/mac
- ↑ https://support.apple.com/guide/mac-help/connect-an-external-display-mchl7c7ebe08/mac
- ↑ https://support.apple.com/guide/mac-help/connect-an-external-display-mchl7c7ebe08/mac
- ↑ https://support.apple.com/guide/mac-help/connect-an-external-display-mchl7c7ebe08/mac
About This Article
Article Summary
X
1. Make sure your computer has two video ports.
2. Purchase a cable and/or adapter if needed.
3. Connect the new monitor to the available video port.
4. Click the Start menu.
5. Select Settings
.
6. Click System
.
7. Click Display
.
8. Select an option from the "Multiple Displays" menu.
9. Click Apply
.
Did this summary help you?
Thanks to all authors for creating a page that has been read 647,586 times.
Advertisement
