Cutting your own bangs is always a risky move. However, if you follow the right steps, you can achieve the look of layered bangs without the price of the salon. You will need a comb, a pair of scissors specially made for cutting hair, and bravery!
Steps
-
Part your hair with your preferred part. Place your index finger on your part, with your second knuckle on your hairline. The tip of your index finger will be where you begin combing your bangs.
- Make sure that your hair is dry. Wet hair can stretch by up to 45%, so it’s much longer when it’s wet. If you cut it while it’s wet, you might cut more than you intend. [1] X Research source
-
Place the comb where the tip of your index finger was. Make a diagonal line away from your part down to your hairline. Keep this line straight.Advertisement
-
Put the rest of your hair back into a ponytail. You can also clip it back from your face if your hair is shorter. Make sure that the only hair you’re cutting is the hair in the part you’ve sectioned off to be bangs.
-
Hold bangs between your middle and index fingers. Use your nondominant hand. Make sure that the hair is even and pulled taut.
-
Cut your bangs at the angle at which you want them to fall on your face. Though you could pick any angle you’d like, a recommended angle is to cut them on a parallel line to the one that you’ve created when you sectioned off your bangs. Cut them somewhere between the top of your lip (for a longer bang) and the tip of your nose (for a shorter bang). Try to cut them in one or two even snips. [2] X Expert Source Courtney Foster
Professional Hair Stylist Expert Interview. 9 December 2019. -
Be careful of making them too short. Be conservative when cutting them. Try them just a little bit shorter at first, and then gradually work up to the length and angle you want as you keep cutting.
-
Cut vertically upward across the bottom of your new bangs to achieve the layered look. Keep the scissors open while you’re cutting. Move horizontally across your bangs, but cut vertically. [3] X Research source
-
Create your part. Make an upside-down V shape, starting about an inch and a half away from your hairline. The “top” of the triangle should be about in the center of your head. A good guide for to locate the outer points is in line with the outer edge of your eyebrows. Any bangs cut outside of that could look too wide.
- Your hair should be completely dry while you’re cutting your hair. You probably also want to cut your hair when it looks “normal,” or how it looks on a typical day. If your hair is unusually curly or atypically frizzy on the day when you cut it, you might be displeased with how it looks on a normal day.
-
Comb the bang hair forward. Tie the rest of the hair back into a low ponytail. Make sure that the only hair out of the ponytail is either the hair that you will cut into bangs.
-
Cut horizontally to the longest possible length that you want your bangs to have. This means that if you want your bangs to blend into the rest of your hair, cut them long enough so that all of your bangs are the length of that longest hair. You can always cut more.
-
Hold bangs flat against your face with a comb. Comb your bangs horizontally so that they lie flat against your face. Decide how long you want your bangs to be. Remember that you can always cut them shorter, but you cannot add back hair that you cut off.
-
Hold bangs between your middle and index fingers. Use your nondominant hand. Make sure that the hair is even and pulled taut.
-
Begin cutting in the middle. Hold your bangs between your thumb and index finger, and, using your scissors, cut vertically up towards your fingers. Keep the scissors open and go slowly and lightly. The hair should become more feathered and layered.
-
Move the scissors out toward each side of your face, layering as you go. Keep the scissors vertical, but move horizontally. If you want your bangs to blend into the rest of your hair, cut gradually less hair as you move toward your ears. [4] X Research source
-
Do not cut more hair, trying to “fix them.” If you make a mistake and cut your bangs too short, do not try to keep cutting in an effort to fix them. Leave them too short and seek another solution such as getting the help of a professional stylist or wearing your bangs pinned up.
-
Part your hair on the other side. If your side bangs came out a little too short, part your hair on the opposite side. Sweep the longer bangs over the shorter bangs so that the shorter bangs aren’t visible anymore. [5] X Research source
-
Wear a hair accessory that hides your bangs. Try a head scarf or a headband where you can sweep your bangs back with the rest of your hair. You can also use a barrette to twist them to the side. [6] X Research source
-
Go to a stylist. Go to a stylist if you made your bangs crooked or in the wrong spot, but they still might be salvageable with some maneuvering. If your bangs are too short, talk to your stylist about adding in extensions like clip-in bangs and styling them to look like natural bangs.
Expert Q&A
-
QuestionDo layered bangs make your forehead look smaller?Courtney Foster is a Licensed Cosmetologist, Certified Hair Loss Practitioner, and Cosmetology Educator based out of New York City. Courtney runs Courtney Foster Beauty, LLC and her work has been featured on The Wendy Williams Show, Good Morning America, The Today Show, The Late Show with David Letterman, and in East/West Magazine. She received her Cosmetology License from the State of New York after training at the Empire Beauty School - Manhattan.Absolutely. Bangs are one of the best ways to make your forehead look smaller. If you do a side-swept frame fringe, it will allow a peak of your forehead to be exposed without showing your entire forehead.
-
QuestionWhat is the result when you hold bangs upward and cut? Will layers be created?Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.Yes, layers can be achieved this way.
-
QuestionI would like to see the hair at the crown. Is it straight across or in an inverted V?Community AnswerFor straight across bangs, it's an inverted V. For side bangs, it's more amorphous. It should come from the bigger side of the side part and be about 2-3 inches horizontally, and 1 inch towards the center of your head. It's different for every person, though, depending on style and hair.
Video
Tips
- Do not cut your bangs too short. You can always cut more hair, but you can’t make your hair longer.Thanks
- Use shears, which are scissors specifically for cutting hair. Office scissors will not give the desired effect!Thanks
- Watch videos and read tutorials for the particular style you want before cutting.Thanks
Warnings
- Have a friend there to support you and give you their feedback.Thanks
References
- ↑ https://www.youtube.com/watch?v=nPk5MwGktu8
- ↑ Courtney Foster. Professional Hair Stylist. Expert Interview. 9 December 2019.
- ↑ https://www.youtube.com/watch?v=CYjuYOnLFXc
- ↑ https://www.youtube.com/watch?v=E-ZyJBeA1Cw
- ↑ https://www.youtube.com/watch?v=E-ZyJBeA1Cw
- ↑ https://www.youtube.com/watch?v=p4gJVRgvbn0
- Videos provided by farahdhukai
About This Article
To cut good layered side bangs, start by parting your hair along your preferred part and tying back everything but your bangs. Then, hold your bangs between your middle and index fingers, pull them taut, and cut them at the angle you want your bangs to fall at. For longer bangs, cut them so they end at the top of your lip, and for shorter bangs, have them end at your nose. Finally, to get the layered look, cut vertically upward across the ends of your new bangs. For more tips from our Cosmetologist co-author, like how to cut layered straight-across bangs, scroll down!
Reader Success Stories
- "Thanks for this! It really helped. I've never cut my own hair before, and I decided I wanted to layer my bangs, make them look more Emo. So I found this and tried it on my own and it turned out really well!" ..." more