How to Drive an Excavator

PDF download Download Article
PDF download Download Article

An excavator is a large piece of machinery used to dig dirt and debris out of construction sites. Using one on a construction site requires operator training and a state operator license. [1] To get started, become familiar with the controls. Learn how the right and left joysticks control the cab, boom, stick, and bucket. Then drive the excavator with its foot pedals. Finally, combine all of these motions to complete your first dig.

Method 1
Method 1 of 4:

Starting the Machine

PDF download Download Article
  1. These are the two standard control patterns for excavators. The difference between the two is that in ISO, the left hand controls the swing and boom and the right hand controls the stick and bucket motions. SAE reverses this pattern, so if you’ve been trained on one, switching to the other is difficult. Most newer excavators have a display in the cab that tells you which control pattern the machine is in. Confirm the pattern before you start using the machine. [2]
    • Change the control pattern if it isn’t in the setting you want. Some excavators have a button or switch in the cab that makes this change. Look on the display screen for a button to switch the control pattern.
    • On other excavators, the control pattern lever is in the back near the engine. Open the back section and look for a blue or red lever. It should have a mark for each pattern setting. Slide the lever from one setting to the other to switch the pattern.
    • Always consult your owner’s manual before changing the control pattern so you follow the right procedure.
    • If you’re just learning how to drive an excavator, learn in ISO pattern. This is more common in excavators. [3]
  2. Excavator seats slide back and forth when you pull a lever under the seat to accommodate people of different heights. Check the seat position when you sit down. Make sure your feet can reach the pedals in the front and you can grab all of the handles comfortably. Pull the lever and adjust your seat if you have to. Then fasten your seatbelt for safety. [4]
    • If you won’t be running the excavator with the door open, then also shut the door. Most excavators have a handle that locks the door, so secure this before starting the machine.
    • Most operators run their machines with the door closed to keep debris out. Sometimes operators keep the door open to communicate with other workers.
    Advertisement
  3. Climb into the cab and look to your right. There is a key and a knob with different positions near the right armrest. Make sure that knob is set to “I” for Idle. Then turn the key to start up the engine.
    • Let the machine run in idle for 5-10 minutes before operating it to warm up.
    • If the weather is cold, run the hydraulic controls through a few cycles before doing any digging.
    4. Advertisement
Method 2
Method 2 of 4:

Moving the Boom and Cab

PDF download Download Article
  1. All excavators have a locking lever on the left side of the cab attached to the armrest. It's usually red. When the lever is down, the joystick controls are locked. Push the lever up until it clicks. This unlocks the controls so you can move the arm and cab. [5]
    • Never unlock your controls before checking around you to make sure no people or objects are nearby.
    • If someone approaches the cab or you get close to an object you don’t want to damage, flip the lever back down until your cab is clear again.
  2. The boom is the section of the digging arm closest to the cab. In ISO control, the right joystick controls the boom height. Find this joystick in front of the right armrest. Pushing forward raises it and pulling backward lowers it. [6]
    • Instructions are given in ISO because this is a more common excavator setting. For SAE, reverse the controls to the opposite side.
  3. The bucket is at the end of the digging arm. The right joystick also controls the bucket position. Push the joystick right to open up the bucket. Push it left to close the bucket. [7]
  4. The left joystick is located in front of the left armrest and controls the stick and swing for the excavator. The stick is the bottom portion of the arm attached to the boom, and looks like it’s a shin attached to a knee. Press the left joystick forward to push the stick further from the cab. Pull the joystick backward to bring the stick closer to the cab. [8]
    • Use smooth motions when operating the stick and boom. These use hydraulic systems, so the machines will move as fast as you pull the joysticks.
    • Don’t suddenly let go of the joysticks or the machine will rock quickly.
  5. Finally, you can rotate the cab with the excavator’s swing control. Pushing the left joystick swings the cab in the direction you're pressing. [9]
    • The cab moves freely and can complete a 360-degree turn. If you hold the joystick in one direction, the cab will keep spinning.
    6. Advertisement
Method 3
Method 3 of 4:

Driving the Excavator

PDF download Download Article
  1. Excavators have 2 pedals with handles attached to them in front of the cab. The handles extend up so they're straight in front of you. These pedals can be operated by either stepping on them with your feet or grabbing the handles with your hands. Both work the same way, so it’s a matter of preference for which you choose. [10]
    • If you’re a beginner, driving with your hands may be easier.
    • Most expert operators prefer using their feet to drive.
  2. Excavator driving controls are simple. To move forward, press both pedals forward at the same time. You can do this with your hands or feet. The amount of pressure you apply determines how fast the excavator moves. [11]
    • If you’re using your feet, rest them on the top of the pedals and push down there.
    • Always make sure no one is around you before moving the excavator in any direction.
    • An excavator’s stop speed is around 8 mph (13 km/h), so even if you press down as hard as you can, you won’t move very fast.
  3. If you want to move backward, just do the opposite motion. Pull back on both handles at the same time to move in reverse. [12]
    • If you’re using your feet, press on the bottom of the foot pedals to move backward. Shift your feet down with your heels on the floor of the cab. Then press down with your toes touching the bottom of the pedals.
    • Always check behind you before reversing. Some newer excavators have cameras on the back to help while you reverse.
  4. The pedals each control 1 of the excavator’s tracks. When you want to turn, press down the pedal on the opposite side that you want to turn. Pressing the left pedal turns the excavator right, and pressing the right pedal turns it left. [13]
    • If you’re already moving, ease off one of the pedals rather than letting go with both and pressing one again. This results in smoother driving.
    • The same rules apply whether you’re turning backward or forward. Press the left pedal back to move back and to the right. Press the same pedal forward to move forward and to the right.
    5. Advertisement
Method 4
Method 4 of 4:

Digging with the Excavator

PDF download Download Article
  1. This position is the most stable and balanced for an excavator. Use the left joystick and rotate the cab until it’s square with the tracks. [14]
    • Most excavators will stay stable if you dig when they aren’t perfectly centered, but while you’re a beginner, always make sure the cab is square until you gain more experience.
    • Once you’ve gotten to the desired position, remove your feet from the foot pedals so you don’t accidentally move while you’re digging.
    • Don't try to drive and dig at the same time until you’re an experienced operator.
  2. Press the left joystick forward until it stops rising. This is the general starting position to prepare for a dig. [15]
    • Experienced operators can dig with the stick in different positions. While you’re still learning, however, extend the stick completely before digging.
  3. If you’re digging into dirt, you need a happy medium between opening the bucket all the way and having it entirely closed. Imagine a line continuing out from the end of the stick. Adjust the bucket with the right joystick so the teeth rest on top of that imaginary line. [16]
    • Don’t try to dig with the bucket fully extended. This drives dirt and debris into the joints and could damage the machine over time.
  4. Press the right joystick backward to lower the boom. Continue lowering until the toothed-section of the bucket enters the dirt, then stop. [17]
    • Only enter the dirt about halfway up the bucket. Any more and you won’t get an effective scoop.
  5. Start by pushing the right joystick left to curl the bucket. When the bucket is almost closed, the ground will start bulging up and form a hill. At this point, stop curling the bucket and lift the boom. Push the right joystick up to raise the boom up and complete the scoop. [18]
  6. Once you’ve scooped the dirt, the last step is dumping it. Use the left joystick and rotate the cab either left or right, depending on where you want to dump the dirt. Hover the bucket over that position. Then push the right joystick to the right and open the bucket, dumping the dirt. [19]
    • Leave the dirt nearby in case you need to backfill the hole.
    • Repeat this process as many times as you need to finish the dig.
  7. When you've completed the job, rotate the cab so it sits square with the tracks, facing forward. Disconnect your joystick controls by pushing the control lever back down. Then bring the throttle down to Idle by turning the knob by your right hand. Let the engine sit in idle for 1 minute so it cools down. Then turn the key and remove it to shut down the machine. [20]
    • Watch your step when exiting the cab. Injuries from falls are common on construction sites.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • In most cases, you only need a high school diploma or GED and a driver’s license to get a job operating an excavator. Check with local regulations to see if you need other certifications.
        Thanks
        Helpful 19 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Drive a Car
      Driving an Automatic Car: Your Full Step-by-Step Tutorial
      Learn How to Drive (for Beginners)
      How to
      Steer Your Car
      How to
      Do Donuts
      How to
      Tow Cars
      How to
      Drive Smoothly with a Manual Transmission
      How to
      Drive a Tesla: The Complete Guide
      How to
      Make a Car Backfire
      How to
      Adjust to Driving a Car on the Right Side of the Road
      How to
      Drive on the Highway for the First Time
      How to
      Drive a Car Safely
      How to
      Adjust to Driving a Car on the Left Side of the Road
      How to
      Pull a Vehicle with a Rope
      Advertisement

      References

      1. ↑ https://study.com/articles/Become_an_Excavator_Education_and_Career_Roadmap.html
      2. ↑ https://construction.papemachinery.com/blog/how-to-change-the-control-pattern-on-a-john-deere-excavator
      3. ↑ https://youtu.be/kUs6G5iBGP0?t=345
      4. ↑ https://www.labour.gov.hk/eng/public/os/B/excavator.pdf
      5. ↑ https://www.labour.gov.hk/eng/public/os/B/excavator.pdf
      6. ↑ https://youtu.be/uutTJgY7Br0?t=234
      7. ↑ https://youtu.be/uutTJgY7Br0?t=266
      8. ↑ https://youtu.be/uutTJgY7Br0?t=277
      9. ↑ https://youtu.be/uutTJgY7Br0?t=303
      1. ↑ https://youtu.be/kUs6G5iBGP0?t=623
      2. ↑ https://youtu.be/uutTJgY7Br0?t=457
      3. ↑ https://youtu.be/uutTJgY7Br0?t=457
      4. ↑ https://youtu.be/kUs6G5iBGP0?t=610
      5. ↑ https://www.labour.gov.hk/eng/public/os/B/excavator.pdf
      6. ↑ https://youtu.be/uutTJgY7Br0?t=630
      7. ↑ https://youtu.be/uutTJgY7Br0?t=640
      8. ↑ https://youtu.be/uutTJgY7Br0?t=684
      9. ↑ https://youtu.be/uutTJgY7Br0?t=689
      10. ↑ https://youtu.be/uutTJgY7Br0?t=710
      11. ↑ https://www.labour.gov.hk/eng/public/os/B/excavator.pdf

      About This Article

      Thanks to all authors for creating a page that has been read 95,479 times.

      Reader Success Stories

      • Timothy Ndimba

        Jun 13, 2021

        "I acquired wisdom, knowledge and understanding."
      Share your story

      Did this article help you?

      Advertisement