How to Fold an Origami Star (Shuriken)

Co-authored by Robert Homayoon

Last Updated: June 24, 2024 Fact Checked

You don't have to go to a weapon store to have your very own "ninja star" or a "Shuriken". You can make one or several out of paper as a cheaper and safer alternative. It is also very fun to play with and a good project for you to do with your child. You can also add it to your ninja costume or just show it off to your friends!

Part 1

Part 1 of 3:

Making a Square of Paper

Download Article

1
Begin with a rectangular piece of paper. Ordinary loose paper or construction paper will do. We will make a square piece of paper from this. If you're already starting with a square piece of origami paper, skip the next two steps.
- Alternatively, you can find a range of origami paper on Amazon .
Fold the top right hand corner diagonally down so the top of the paper lines up with the left side, forming a point at the top right corner.

Advertisement
Cut or carefully tear along the edge so you are left with a square of paper.

Part 2

Part 2 of 3:

Forming the Parts

Download Article

Fold the square in half . The fold should be parallel to the edges. ^{[1]
X
Research source}
Cut the square in half into 2 equal parts. Scissors may make this easier. ^{[2]
X
Research source}
Fold each piece in half vertically again, parallel to the long sides.
Fold the end diagonally, so the edges line up. ^{[3]
X
Research source}
Repeat this fold, on each end of each strip, making sure the folds are oriented as shown.
Fold the end on the diagonal again. You should end with a big triangle facing you and two smaller triangles facing away from you.
Repeat this same fold on each end of each strip. Make sure the orientations go opposite one another, as shown. ^{[4]
X
Research source}

Part 3

Part 3 of 3:

Putting Them Together

Download Article

^{[5]
X
Research source}
There should be a square in the center of each piece that lines up, but if you can't find it yet, don't worry. Just line up the middles. ^{[6]
X
Research source}
^{[7]
X
Research source}
You may have to coax a little to get it tucked in. ^{[8]
X
Research source}
This will keep the ninja star from becoming undone.

Expert Q&A

Search

Add New Question

Question

How do I fold a sharp crease?

Robert Homayoon
Origami Expert
Robert Homayoon is an Origami Expert known for his engaging YouTube videos and accessible instructions. He has been teaching origami on YouTube since 2009. His channel has a following of over 676,000 subscribers, and his videos have garnered over 211 million views. Robert uses his channel to highlight his passion for teaching people origami, crafts, and how to solve puzzles. He graduated from SUNY Albany in 2007 and earned his D.M.D degree from Temple University Dental School in 2013.

Robert Homayoon

Origami Expert

Expert Answer

I often employ a technique where I use my thumb and fingernail, with the tip of my pointer finger, to run along the crease line. It's not exactly pinching the fingernail together but rather using the fingernail and the tip of the finger to align and define the crease sharply. Simultaneously, I secure the paper with my other hand to prevent any potential shifting that might occur while dragging my thumb and pointer finger along the fold. This ensures precision and stability in the crease.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 17 Helpful 42
Question

Do I really need to put tape on my origami star?

Community Answer

Not necessarily. If you followed the steps correctly, you may not need tape, but for some people it can be helpful for keeping the origami star in the correct shape.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 148 Helpful 483
Question

Can I use any size of paper?

Community Answer

Yes, but it has to be a rectangle or square. You can turn the rectangle paper into a square and begin.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 149 Helpful 364

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Reader Videos

Tips

This works best with thicker paper, such as from magazines

Thanks
Helpful 58 Not Helpful 23
Make three or more stars at once and stack them so their shapes are almost lined up, but are spaced apart slightly. Grip them between your thumb and index finger and throw all the stars at once from your side to the front, like a frisbee.

Thanks
Helpful 364 Not Helpful 210
You can decorate the ninja star using glitter glue markers, glitter pens etc.

Thanks
Helpful 7 Not Helpful 4

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

You can make more points by folding your ninja star so it looks like half of an 8-pointed star. Then, make one more and attach them or stack thin ninja stars together. This allows you to build layers without making it too bulky.
For an added effect, spray paint your finished ninja star. Just make sure to do this after you've folded it completely so you don't waste paint coating the inside. A glossy metallic looks slick!
Be careful when tucking in the paper at the end. It's easy to mess up the whole thing if you don't pay attention to where you are tucking the folds. Go slowly and double check each tuck.
You can use different colored paper to make it more fun. It looks great when thrown if you use contrasting shades. Interlocking rainbow colors look neat as they spin.
Creasing the folds firmly makes a big difference. Carefully crease each fold you make so the paper holds its shape. Sloppy folds lead to a sloppy star.
If it doesn't fly right when thrown, try putting a quarter in the center on the inside. The added weight can help it sail better through the air.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Be careful when throwing the stars. You could even injure yourself.

Thanks
Helpful 226 Not Helpful 105
Edges can be sharp, keep away from small children.

Thanks
Helpful 217 Not Helpful 106
Do not throw this at people or animals.

Thanks
Helpful 218 Not Helpful 124

Things You'll Need

One sheet of 8.5 x 11" paper (or A4 printing paper) or origami paper (optional but preferred)
Scissors (optional)

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

Log in

How to Fold an Origami Star (Shuriken)

Steps

Making a Square of Paper

Forming the Parts

Putting Them Together

Expert Q&A

Video

Reader Videos

Tips

Tips from our Readers

Warnings

Things You'll Need

You Might Also Like

Expert Interview

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories