How to Install RAM

PDF download Download Article
PDF download Download Article

Has your computer started to feel a little sluggish? Maybe it’s not performing like it used to, or can’t keep up with the latest software? Upgrading your RAM (Random Access Memory) is one of the simplest and cheapest ways to quickly improve your computer’s performance. But how to do you install the RAM you've purchased for your upgrade? This wikiHow teaches you how to install your new RAM in a laptop, PC desktop, or iMac computer.

Method 1
Method 1 of 3:

On PC Desktop

PDF download Download Article
  1. RAM comes in a variety of models, sizes, and speeds. The type you'll need to buy depends on your motherboard. Check your motherboard or computer’s documentation, or check the manufacturer’s website for the RAM specifications that are compatible with your hardware.
    • Your motherboard has a limit to the number of RAM sticks you can install. Some motherboards support only two, while others support four, six, or even more. Most motherboards have a limit to the amount of memory that they support, regardless of the number of slots.
    • It's also important to note that not all PCs are upgradeable, so if you're not sure, check with your PC's manufacturer. This is often the case with laptops
    • There's no guarantee that unmatching RAM will work together. So if you're buying multiple sticks of RAM, buy it in a set of two or more that are identical.
  2. Once you have your RAM, unplug your PC's power plug and any peripherals connected to the computer, such monitors, keyboards, and mice.
    Advertisement
  3. Lay your computer tower on its side, so that you can access the motherboard when the side panel is removed. You may need a Phillips-head screwdriver to remove the panel, or you may be able to unscrew it by hand.
  4. Ensure that you do not have static build-up on your body. Static can damage computer parts, and can be imperceptible to a human. Ground yourself before starting, or use an antistatic wrist strap.
    • You can ground yourself by touching a metal part on your computer case while it is unplugged from the wall. Simply being turned off does not remove any standby voltages, so make sure it's unplugged.
    • Don’t stand on carpet while working on the interior of the computer.
  5. Most motherboards have 2 or 4 RAM slots. RAM slots are typically located near the CPU, though their location may vary depending on the manufacturer or model. Look for narrow slots about 4.5 inches long with tabs on either end. At least one of the slots already has a stick of RAM in it.
  6. If you are replacing old RAM, remove it by pressing the clamps downward on either side of the slot. You’ll be able to lift the RAM straight out of the motherboard with little to no effort.
    • If you're having to pull too hard, the clamps are likely not down far enough. You may need to use one hand to push the clamps down while using the other hand to remove the RAM.
  7. Carefully remove the RAM from the shielded packaging. Grip it from the sides to avoid touching the contacts on the bottom or the circuitry on the board.
  8. Line up the notch in the stick of RAM to the break in the slot. Set the stick into the slot and then apply equal pressure onto the stick until the clamps on the side click and lock the RAM in. It'll only fit in one way, so if it's not lining up properly, just flip it around. You may have to apply a fair amount of pressure, but never force it in.
    • Make sure matching pairs are inserted into their matching sockets. Some are labeled on the board or by color, though you may need to refer to your motherboard layout diagram.
    • Repeat the process for each stick of RAM you want to install.
    • While you have the PC open, remove dust using a bottle of compressed air. This can be a quick fix for general overheating and performance issues. Compressed air cans are available at any office supply store.
  9. Once you’ve finished inserting your RAM sticks, you can put the panel back on and screw it back in. Avoid running your computer while the panel is off, as this will actually reduce the cooling power of your fans. Plug your peripherals and monitor back in.
  10. Your computer should start normally. If your computer displays the self-test during the startup, then you can verify that the RAM has been installed correctly. If not, you can verify that the RAM was installed once Windows starts.
    • If your PC will not boot, the RAM is probably not seated properly. Power down your PC and re-open it. Then, remove and reseat the RAM. Make sure it clicks firmly into place and then try again.
  11. Press the Windows key + Pause/Break to open the System Properties. Your RAM will be listed in the System section or at the bottom of the window.
    • Operating systems calculate memory differently and some computers dedicate a certain amount of RAM to specific functions (e.g., video), decreasing the amount available. For example, you may have purchased 8 GB of RAM, but you'll likely only see about 7.78 GB of usable memory.
  12. If you aren’t sure your memory was installed correctly, or your computer isn't running properly since installing it, you can test the RAM using the Windows Memory Diagnostic tool. It may take a while to run, but will discover any errors and display how much is installed.
    • To run the tool, press the Windows key on the keyboard and type memory into the search bar. Click Windows Memory Diagnostic to launch the tool, and then click Restart now and check for problems to run diagnostics.
    13. Advertisement
Method 2
Method 2 of 3:

On iMac

PDF download Download Article
  1. The type of RAM you need for your iMac depends on the model. To find out what type of RAM, as well as the maximum amount of RAM allowed, for your model, visit https://support.apple.com/en-us/HT201191 .
  2. Before you get started, fully power down your iMac and disconnect its power cord from the wall. If any other peripherals are connected to your iMac, disconnect those as well.
    • Because the inner components can run quite hot, Apple recommends waiting at least ten minutes before installing RAM in your iMac.
  3. To protect the monitor, lay a clean cloth down on a flat surface before laying your iMac down monitor-side-down. [1]
  4. The steps are different depending on the model:
    • 27" and 21" models (2012 or later): Press the small gray button just above the power port to open the memory compartment door. Lift the door off of the back of the monitor and set it aside. Then, push the two levers outward (to the sides) to release the memory cage, and pull the levers toward you to see the RAM slots.
    • 20" and 17" models (2006 only): Use a Phillips head screwdriver to unscrew both screws on the memory access door, which is on the bottom edge of the monitor. Set it aside once removed. Then, press the two ejector clips on either edge of the access door outward (to the sides).
    • Other models: Use a Philips head screwdriver to remove the screw at the center of the memory access door. The door is on the bottom edge of the monitor. Remove the door completely and set it aside. Untuck the tabs in the memory compartment so they are visible.
  5. Here's how:
    • 27" and 21" models (2012 or later): Pull the RAM straight out upward. It should easily come out of the slot. Make sure to note the direction of the notch so you know how to insert the new RAM.
    • 20" and 17" models (2006 only): Simply pull the RAM outward to remove it, noting its direction so you can properly insert the new RAM.
    • Other models: Gently pull the tab toward you to eject memory that's currently installed. Note the orientation of the RAM because you'll want to install the new RAM the same way.
  6. Again, it's a little different depending on the model:
    • 27" and 21" models (2012 or later): Align the RAM over the slot with the notch pointing downward. It will line up with the notch inside the slot. Press downward until the RAM clicks into place.
    • 20" and 17" models (2006 only): Slide the RAM notch-side-in into the slot. Use your thumbs to press the RAM in until you feel a slight click. Press both ejector clips back inward to lock the RAM into place.
    • Other models: Slide the RAM into the slot with the notch pointing upward (toward the top of the monitor). When you push it in far enough, you'll feel a slight click.
  7. If your model has plastic tabs that you untucked, tuck them back into place first. Then reattach the door or cover just as you removed it.
    • If you pressed a button to unlock the door, you don't have to press the button to put it back on.
  8. When your iMac turns back on, it will self-test and detect the new RAM automatically.
    9. Advertisement
Method 3
Method 3 of 3:

On Notebook

PDF download Download Article
  1. RAM comes in a variety of models and speeds. The type of RAM you can get is dependent on your computer. Check your laptop’s documentation, or check the manufacturer’s website for the RAM specifications that are compatible with your hardware.
  2. Start by saving any work you have open, and then shut down your computer normally. If any external cables are attached, remove them as well. It's also a good idea to press and hold the power button for about 5 seconds to discharge residual power.
    • If you're using a Mac, click the Apple menu at the top-left corner and select Shut Down .
    • If you're using Windows, click the Windows menu, select the Power button, and then choose Shut Down .
  3. The bottom of your laptop should be facing upward.
  4. Before opening any panels on your laptop, make sure you are properly grounded to prevent damaging your components. You can ground yourself by touching a metal part on your computer case while it is unplugged from the wall. [2] Simply being turned off does not remove any standby voltages.
  5. This can be tricky because the process is so different depending on your laptop. Your owner's manual or manufacturer's website would be the best places to check to find out how exactly to access your laptop's RAM slots. In general, you'll usually need to remove the battery cover (if there is one) and/or unscrew the bottom of the case and lift it away from the computer.
  6. Your notebook’s RAM can be accessed by removing the panel on the bottom of the computer. There are usually a few different panels, so look for the one with the memory icon, or check you manual.
    • Most notebooks only have one or two RAM slots. Higher-end notebooks may have more.
    • You will need a very small Phillips-head screwdriver in order to remove the panel (if the panel is required to remove).
  7. When it is required, it is because the pairs are the same size and timings and meant to run together as dual-channel. If you're just installing one stick of RAM or RAM with different sizes or timings, you don't have to have a matched pair.
  8. If you are replacing old RAM, remove it by releasing any clamps on the side of the socket. You can release the clamps by pressing down on them or pushing them both outward in opposite directions. The RAM will pop up at a little bit of an angle. Lift the RAM at a 45° angle and then pull it out of the socket.
  9. Make sure to only grip the stick from the sides to avoid touching the contacts or the circuitry on the stick itself.
  10. The RAM will not lock into place unless the notches align. Slide the RAM in at a 45° angle until the clamps lock into place.
    • If you have multiple free slots, install RAM in the lowest number first.
  11. Flip the laptop around, plug it in and turn it on. Your computer should boot up normally and automatically detect the RAM.
    • If you're using a PC and concerned that the RAM wasn't installed properly, press the Windows key on the keyboard and type memory into the search bar. Click Windows Memory Diagnostic to launch the tool, and then click Restart now and check for problems to run diagnostics.
    12. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How much RAM do I need?
    Spike Baron
    Network Engineer & Desktop Support
    Spike Baron is a Network Engineer & Desktop Support Expert based in Los Angeles, California. He is the owner of Spike’s Computer Repair. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has worked as an IT Systems expert for numerous companies, including Huntington Health, Blackbox, Honda, and Manufacturers Bank. In his spare time, Spike also builds and restores computers. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.
    Spike Baron
    Network Engineer & Desktop Support
    Expert Answer
    The more RAM you have, the smoother your experience will be. However, if you're just doing some basic online browsing and light picture editing or something, then 8 GB is going to be totally fine. If you're doing AutoCAD, 3D modelling, or some other kind of crazy CPU-intensive work on the computer, then you want 32 GB if you can support it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    What are some signs that my RAM needs to be replaced?
    Spike Baron
    Network Engineer & Desktop Support
    Spike Baron is a Network Engineer & Desktop Support Expert based in Los Angeles, California. He is the owner of Spike’s Computer Repair. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has worked as an IT Systems expert for numerous companies, including Huntington Health, Blackbox, Honda, and Manufacturers Bank. In his spare time, Spike also builds and restores computers. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.
    Spike Baron
    Network Engineer & Desktop Support
    Expert Answer
    If your computer won't boot and it just loads an error message, that's a big sign. The other sign is if you get a blue screen on startup. Those are the two big signs that your RAM is faulty.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    Can I just add RAM to my PC?
    Spike Baron
    Network Engineer & Desktop Support
    Spike Baron is a Network Engineer & Desktop Support Expert based in Los Angeles, California. He is the owner of Spike’s Computer Repair. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has worked as an IT Systems expert for numerous companies, including Huntington Health, Blackbox, Honda, and Manufacturers Bank. In his spare time, Spike also builds and restores computers. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.
    Spike Baron
    Network Engineer & Desktop Support
    Expert Answer
    It's not quite that simple, although it isn't super complicated. You have to check your motherboard to make sure you have open slots; that's step one. Then, you have to make sure you get RAM cards that fit those slots.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Don't be alarmed if the computer shows you slightly less RAM memory than you purchased. This is a difference in measurement or memory allocation. If the RAM memory size is largely different than what you purchased and installed, then a chip may not be connected properly or may be defective.
        Thanks
        Helpful 8 Not Helpful 5
      • If you are getting a beep when you turn on the computer, you may have installed an incorrect memory type, or you have installed the memory modules incorrectly. Your computer manufacturer can explain what the beep code means.
        Thanks
        Helpful 2 Not Helpful 1
      • A good website to use is the Crucial memory website http://www.crucial.com/ as they have a memory adviser tool which tells you how much and what type of ram your computer takes. You can also buy memory from here
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not insert RAM modules backwards. After the computer is turned on with the RAM modules backwards, the RAM slot and the offending RAM module are damaged. In rare cases, it may damage the motherboard.
        Thanks
        Helpful 15 Not Helpful 4
      • If you do not feel comfortable opening a computer, take the computer to a professional. Since you purchased the RAM modules yourself, it should not be too expensive to have someone else install it.
        Thanks
        Helpful 10 Not Helpful 4
      • Make sure to discharge any possible static buildup before touching RAM; it is extremely sensitive to ESD (Electro-Static Discharge). Do this by touching metal before touching your computer.
        Thanks
        Helpful 10 Not Helpful 6
      • Do not touch the metal parts on the RAM modules. This may cause damage to the RAM modules.
        Thanks
        Helpful 12 Not Helpful 9
      Advertisement

      You Might Also Like

      How to
      Clear Your RAM Cache and Free Up Memory
      How to
      Find Out the Maximum RAM Capacity for Your Computer
      Upgrade Your Computer's RAM: Step-by-Step Instructions
      How Much RAM Do You Have? Easily Check PC & Mac Memory
      See How Much RAM You Have on PC, Mac, Chromebook, & iPad
      How to
      Upgrade and Install RAM on a Desktop or Laptop Computer
      How to
      Check Your Computer's Memory Usage: Complete Guide
      How to
      Free Up RAM
      Advertisement

      References

      1. ↑ https://support.apple.com/en-us/HT201191
      2. ↑ https://uk.crucial.com/support/install-memory-laptop

      About This Article

      Article Summary X

      1. Power down the computer.
      2. Remove the case and ground yourself.
      3. Remove new RAM from protective packaging.
      4. Align new RAM above an empty slot.
      5. Press the RAM in until the clamps click.
      6. Remove dust with canned air.
      7. Replace the case and power on the PC.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 4,591,405 times.

      Reader Success Stories

      • Thomas Howard

        Jan 9, 2017

        "I have just upgraded my gaming PC to 16 GB of RAM using this website. I couldn't have done it without you. ..." more
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement