How to Install Valve Stems on Tires

PDF download Download Article
PDF download Download Article

A faulty valve stem can cause your tires to release air and leave you with a flat tire. [1] Having it repaired by professionals can cost upwards of thirty dollars, but in some instances, you may be able to replace a faulty stem yourself. If the wheel does not currently have a tire on it, the process if fairly straight forward and requires one inexpensive tool. However, swapping valve stems with a mounted tire in place requires some specialty tools that may cost more than having the repair done.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Method 1
Method 1 of 3:

Installing a Valve Stem on a Tireless Rim

PDF download Download Article
  1. Look at the wheel before getting started and identify the hole through it that the valve stem is supposed to go through. Press the valve stem into the hole from inside where the tire will mount, so the nozzle is sticking out of the inside of the wheel.
    • Hold the valve stem in place with your finger until you can secure it to the valve stem tool.
    • There is only one hole through the rim so it should be easy to find.
  2. Place the valve stem tool over the threaded portion of the valve stem and rotate it clockwise to tighten the two together. The threads on the stem should be the same as the threads on the tool, but be careful not to cross thread the tool onto the stem.
    • If the tool is not threading on properly, unscrew it and attempt to screw it on again.
    • Hold the valve stem from the other side with your finger so it doesn’t rotate with the tool.
    Advertisement
  3. Once the valve stem is secured to the valve stem tool, place the handle up against the lip of the rim. Press down on the end of the handle like a lever, so it pulls up on the valve stem and pulls it through the rim.
    • You may want to place a rag beneath the handle of the tool on the lip of the wheel to protect its finish.
    • You may need to apply a good deal of pressure in order to wedge the valve stem in the hole properly.
  4. The diameter of the valve stem increases the closer you get to its base and there are two rings in the valve stem at its widest portion. Continue to apply pressure to the valve stem tool until you’ve pulled the first ring through the hole in the wheel.
    • The bottom ring should be seated firmly against the inside of the wheel.
    • The top ring should be on the outside of the wheel, holding it securely in place.
  5. Once the valve stem is properly seated in the wheel, press on the bottom of it as you rotate the valve stem tool counter clockwise to unscrew it from the stem. Once done, press on the valve stem and move it around with your fingers. It should not come loose from the wheel.
    • Don’t apply too much pressure when testing the valve stem or you may push it back through the hole.
    6. Advertisement
Method 2
Method 2 of 3:

Removing a Valve Stem with the Tire Still Mounted

PDF download Download Article
  1. You will need to remove the wheel from the vehicle it’s on if it isn’t already. Slide a jack beneath the closest designated jack point to the wheel in question and raise and lower or rotate the handle in order to lift it up off the ground . [2]
    • Use a tire iron or socket wrench to break the lug nuts loose on the wheel prior to jacking up the vehicle.
    • Place a jack stand beneath the vehicle to support it while you work on the wheel.
  2. Use the same tire iron or wrench to unscrew the lug nuts on the wheel the rest of the way by turning them counter-clockwise. Once you have removed all of the lug nuts, set them aside someplace safe for when you reinstall the wheel. [3]
    • If you misplace a lug nut, you can purchase replacements at your local auto parts store.
  3. With the lug nuts removed, the wheel may come off of the lug studs easily, but in some instances it may be stuck on due to oxidization or rust. If the wheel won’t come off, hit the rubber sidewall of the tire with a rubber mallet all the way around the wheel to break it loose. [4]
    • Lay the wheel down on the ground face up so the valve stem is toward the sky.
    • Do not strike the wheel itself as you may damage it.
  4. Press the rounded portion of the valve change tool into the valve in the center of the valve stem. When you apply pressure to the center valve, the air inside the tire will begin to leak out. There is quite a bit of pressure in the tire, so prepare yourself for a large burst of air. [5]
    • You may want to wear gloves to prevent the air escaping from being too cold on your hands.
    • You can also use a screw driver or similar tool to release the air.
  5. With all the air released from the tire, use your thumb to press the valve to the side so it is flat against the wheel. Take the valve change tool and press the hook down into the base of the valve stem so it goes into the wheel. [6]
    • You may need to apply a good amount of pressure to get the tool past the valve stem.
    • Be careful not to scratch the finish of the wheel with the valve change tool.
  6. With the valve change tool inserted, rotate it in either direction a quarter turn, then pull it straight back up out of the wheel. The hook on the tool will catch the bottom of the valve stem and pull it out with the tool. [7]
    • Try to pull straight outward from the wheel to avoid chipping the finish.
    7. Advertisement
Method 3
Method 3 of 3:

Installing a New Valve Stem

PDF download Download Article
  1. Valve stem replacement tool kits come with an insertion tube that should be placed over the valve stem hole with the larger opening facing up. Make sure the tube is correctly aligned with the hole; if it is even slightly misaligned it will stop you from inserting the new valve stem. [8]
    • You can purchase valve stem replacement tool kits at your local auto parts store.
    • The insertion tube will guide the new valve stem as you press it into place.
  2. Take the new valve stem and cover it in an automotive lubricant designed to create a seal once the valve stem is in place. The lubricant will make it easier to insert the valve stem through the valve stem hole. [9]
    • You can purchase tire sealant lubricant at your local auto parts store.
    • You may be able to insert the valve stem without lubricant, but the seal will be stronger if you use it.
  3. Insert the valve stem top first into the insertion tool that resembles a screw driver, then slide the stem and tool into the insertion tube. With one swift motion, press the valve stem down through the tube and hole in the rim, then pull back up to pull the top of the stem through the wheel. [10]
    • You will need to thread the valve stem onto the insertion tool so you can pull it back up once inserted.
    • You may need to apply a good deal of pressure to get the stem through the hole.
  4. Just as you swiftly pressed the stem through the hole, now pull backward on the handle in one swift motion to pull the majority of the valve stem back through it. The bottom ring of the valve stem will prevent it from passing all the way back through, properly seating the valve stem. [11]
    • If you accidentally pull the stem all the way back through, repeat the process to reinsert it.
    • You can now refill the tire and place it back on the vehicle.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Does the valve stem go into the tire? If not, how does it measure the pressure?
    Community Answer
    The tire and wheel together hold the pressurized air. The valve stem goes into the wheel.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 6
  • Question
    I've had my valve stems replaced twice in two months. Why are they still leaking after a short period of time?
    kyle sis
    Community Answer
    Inspect the area where the valve stem sits on the wheel. There could be a raised piece of metal that is causing it to wear a small hole in the stem. If you discover a raised piece of metal or a burr, sand it smooth with sandpaper or a small file.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Do tractors have tubeless tires?
    FerrisWELD
    Community Answer
    Yes, some tractors do have tubeless tires. However, some tractors have tires with tubes.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Know when Car Tires Need Replacing
      How to
      Patch a Tire
      How to
      Switch the Wheels on a Car
      How to
      Check the Fluids in a Car
      How to
      Remove Lug Nuts and Tires
      How to
      Install Snow Chains on Tires
      How to
      Put a Spare Tire on Your Vehicle: 11 Simple Steps
      How to
      Loosen Lug Nuts
      How to
      Let Air Out of a Tire
      How to
      Change Wheel Bearings
      How to
      Remove a Stuck Wheel & Prevent It From Happening Again
      How to
      Check Tire Tread with a Penny
      How to
      Put Tires on Rims
      How to
      Cut a Tire
      Advertisement

      References

      1. ↑ Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      2. ↑ http://www.dummies.com/home-garden/car-repair/how-to-safely-jack-up-your-vehicle/
      3. ↑ http://www.dmv.org/how-to-guides/changing-tire.php
      4. ↑ http://www.dmv.org/how-to-guides/changing-tire.php
      5. ↑ https://www.youtube.com/watch?v=TgDzZIop_uw
      6. ↑ https://www.youtube.com/watch?v=TgDzZIop_uw
      7. ↑ https://www.youtube.com/watch?v=TgDzZIop_uw
      8. ↑ https://www.youtube.com/watch?v=DgH4rzWbutg
      9. ↑ https://www.youtube.com/watch?v=DgH4rzWbutg
      1. ↑ https://www.youtube.com/watch?v=DgH4rzWbutg
      2. ↑ https://www.youtube.com/watch?v=DgH4rzWbutg

      About This Article

      Article Summary X

      To install a valve stem on a tire, start by removing the tire from the vehicle and letting the air out by applying pressure to the center of the valve. Then, remove the old valve with a valve change tool and place an insertion tube into the hole that’s left behind. Next, lubricate the new valve stem with automotive lubricant and put it into the top of the insertion tube. Afterwards, use the insertion tool to push the valve stem into the tire using a swift, firm motion. Finally, pull up on the insertion tool with a strong jerk so the bottom ring of the valve catches and stays in place. For tips on how to install a valve stem on a tireless rim, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 298,768 times.

      Reader Success Stories

      • David Wheeler

        Mar 15, 2022

        "First of all, I had no idea there were other tools needed to add these valve stems or which ones to even use. ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement