How to Install Wheel Covers

PDF download Download Article
PDF download Download Article

Installing new wheel covers, or hubcaps, on your vehicle can instantly change its appearance. Often, wheel covers can be installed without the use of any tools or even jacking up the vehicle. Simply insert the retention ring inside the cover. Then, align the valve stem opening on the cover with the stem on your wheel and press the cover onto the wheel. In some instances, you need to remove the lug nuts from your wheels to install the wheel cover.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Part 1
Part 1 of 3:

Mounting Wheel Covers on Your Wheels

PDF download Download Article
  1. While some wheel covers can be installed without removing lug nuts, you may often find that the lug nuts on your wheel are intended to help hold the wheel cover in place. If need to remove the lug nuts on the wheel, first loosen the lug nuts, then jack the car up . [1]
    • Always jack your vehicle up on solid, level surfaces like blacktop or concrete.
    • Place jack stands beneath the vehicle once you jack it up for safety.
  2. Use a tire iron or socket wrench to completely unscrew the lug nuts holding the wheel onto your vehicle. Set the lug nuts aside for you to use when mounting the wheel back onto the vehicle. [2]
    • Turn the lug nuts counter-clockwise to unscrew them.
    • Be careful not to misplace any lug nuts. It is not safe to drive your vehicle with fewer than the provided amount of lug nuts.
    Advertisement
  3. The retention ring on the back of the wheel cover will have an indentation in it, as well as a hole through the wheel cover in the same area. This gap is intended to allow the valve stem to pass through the cover for you to access when adding air to your tires. [3]
    • Be sure to align the gap in the cover and retention ring with the valve stem so it can pass through.
    • Many wheel covers will have a drawing of a valve stem on the back intended to help you identify where the valve stem passes through.
  4. With the valve stem properly aligned through the wheel cover, press the wheel cover directly onto the wheel. If you did not need to remove your lug nuts, the wheel cover should pop into place and not come back off the wheel easily. [4]
    • If you do not need to use lug nuts to secure the wheel cover, pull on it a bit to ensure it will not come off while driving.
    • The wheel cover should not feel loose, nor should it be easily pulled off.
  5. If you removed the lug nuts previously, use your hands to thread each nut onto a lug stud passing through the wheel and wheel cover. Once you are confident the lug nuts are properly threaded, use a wrench or tire iron to tighten them. [5]
    • Be sure to re-tighten the lug nuts once you lower the vehicle down off of the jack.
    • Be sure all lug nuts are tight before attempting to drive the vehicle.
    6. Advertisement
Part 2
Part 2 of 3:

Installing the Retention Ring

PDF download Download Article
  1. If your wheel covers did not come with the retention rings installed, remove them from the packaging and place them face down on a surface that won’t scuff or damage their finish.
    • You can place the wheel covers in grass or on a soft material like cloth or Styrofoam.
    • Be sure you don’t move the wheel covers around as they lay face down to avoid scuffing or scratching them.
  2. The retention ring will have a bend in it designed to allow the valve stem to pass through it. Line that bend up with the hole in the wheel cover that is also intended for the valve stem to pass through.
    • There will be only one bend in the ring, making it easy to identify the parts to line up.
    • If the ring is not lined up properly, it will mount on the wheel cover, but will not be able to mount on the wheel itself.
  3. Use your thumbs to press the ring down onto the clips that will hold it in place. Different wheel covers will have a different number of clips, but there are usually at least six.
    • Simply pressing down on the ring will snap the clips into place.
    • Continue to press the ring into each snap all the way around the wheel cover.
  4. It may seem as though the ring is too large for the wheel cover as you get to the final few clips. This is common, and likely does not indicate that there is any problem. Bend the ring slightly in order to clip it into the final few clips.
    • Once the ring is in all of the clips it will redistribute the pressure and fit properly.
    • If the ring is far too large to be clipped in, it may be the wrong ring for the size wheel cover.
    5. Advertisement
Part 3
Part 3 of 3:

Troubleshooting Problems with Wheel Covers

PDF download Download Article
  1. If your wheel covers will not mount on the vehicle, it may be because the covers were made for a different sized wheel. Automotive wheels come in a wide variety of sizes that are usually measured in inches.
    • Check the size of the wheel you have by locating the tire size printed on the tire. The last number in the tire size (such as P215/65 R15) is the number of inches the wheel is in diameter.
    • Be sure the wheel cover you purchased is intended for that size wheel.
  2. Some kinds of wheels cannot have wheel covers mounted on them because of their design. Often, decorative wheel designs do not permit the mounting of a wheel cover. If there isn’t a lip around the perimeter of the wheel, the wheel cover likely won’t mount.
    • Look for a lip around the outside of the wheel for the retention ring to seat in.
    • If there is no lip, wheel covers likely cannot be installed.
  3. If your new wheel cover will not seat properly on the wheel, be sure the old wheel cover has already been removed. Also check to see if the lug nuts are still in place, as many wheel covers are meant to be installed beneath lug nuts.
    • Thin wheel covers that come from the factory may be difficult to distinguish from steel rims in some instances.
    • Your new wheel covers may require the removal of lug nuts before they can be mounted.
  4. If the new wheel covers do not mount to your wheels, check to make sure the retention rings are installed properly on the underside of the covers.
    • If the retention rings are not installed, you will need to install them prior to mounting the wheel covers.
    • Most new wheel covers come with retention rings. If you do not have them, return to where you purchased the covers to get rings to mount them.
    5. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Do I need to add some adhesive or silicon when mounting wheel covers?
    Community Answer
    No, the wheel cover should either pop into place or be secured by the lug nuts. There is no reason to use any kind of adhesive.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 7
  • Question
    Can you re-use mounting rings?
    Community Answer
    Yes. You can re-use the mounting rings on your old wheel covers if you choose. As long as the rings are not bent, they will hold the wheel cover in place.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 6
  • Question
    Do all plastic hubcaps have the wire ring? The one I bought doesn't, can it still be installed?
    William lawson
    Community Answer
    No, only the good ones have them. The cheaper ones don't have them but they can still be installed and used.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Change a Hubcap
      How to
      Put a Spare Tire on Your Vehicle: 11 Simple Steps
      How to
      Loosen Lug Nuts
      How to
      Install Snow Chains on Tires
      How to
      Let Air Out of a Tire
      How to
      Change Wheel Bearings
      How to
      Remove a Stuck Wheel & Prevent It From Happening Again
      How to
      Check Tire Tread with a Penny
      How to
      Put Tires on Rims
      How to
      Cut a Tire
      How Old Are Your Tires? Reading the DOT Code & Replacing Old Tires
      How to
      Replace Tie Rod Ends
      How to
      Measure Rims
      How to
      Identify Run Flat Tires
      Advertisement

      References

      1. ↑ https://www.streetdirectory.com/travel_guide/214168/car_focus/installing_chevrolet_hubcaps_the_right_way.html
      2. ↑ https://www.streetdirectory.com/travel_guide/214168/car_focus/installing_chevrolet_hubcaps_the_right_way.html
      3. ↑ https://www.tirerack.com/upgrade-garage/how-do-i-install-wheel-covers-hub-caps
      4. ↑ https://www.tirerack.com/upgrade-garage/how-do-i-install-wheel-covers-hub-caps
      5. ↑ https://www.streetdirectory.com/travel_guide/214168/car_focus/installing_chevrolet_hubcaps_the_right_way.html

      About This Article

      Article Summary X

      Installing wheel covers on your vehicle is a relatively easy process, even if you don’t have any mechanical experience. Make sure you buy the right sized wheel covers for your wheels. Some wheel covers don’t require you to remove your lug nuts and click right on when they’re lined up properly. For others, you’ll need to remove the lug nuts and jack your car up. Then, line your wheel covers up so the indent is by the valve, and screw the lug nuts back on. If your wheel covers don’t come with the retention rings pre-installed, you’ll also have to attach them before you screw them onto your wheels. Just line them up and clip the retention ring into place. For more tips, including how to secure your vehicle once you’ve jacked it up, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 202,428 times.

      Reader Success Stories

      • Gigi Harris

        Aug 25, 2021

        "It helped identify the retention ring and and allow the various names that are used to describe the same; as well ..." more
      Share your story

      Did this article help you?

      Advertisement