How to Replace a Tripod Head

PDF download Download Article
PDF download Download Article

A tripod is an excellent tool for professional and amateur photographers alike. Eventually, however, you may need to replace the tripod head, either because the old one is worn out or you’re upgrading to a better type. Some people are in the dark about the process, but it’s actually very easy. In just a few minutes, you can take off your old tripod head and install a brand new one.

Part 1
Part 1 of 2:

Remove the Old Head

PDF download Download Article
  1. You won’t be able to unscrew the tripod head if any parts are loose. Start by turning the ball locking knob on the head clockwise to lock the head in place. Then turn the center column knob, underneath the head, clockwise as well until it stops. Double check to make sure the tripod head isn’t moving. [1]
    • If your tripod or head have any more moving parts, lock them as well. Any loose parts might make it harder to remove the head.
  2. Use your non-dominant hand. Grab the tripod center column and hold it firmly. [2]
    • Some tripods don’t have a center column. If yours doesn’t, then grab it by one of the legs and hold it tightly.
    Advertisement
  3. With your other hand, grab the tripod head. Turn it counterclockwise to unscrew it. You may need to apply some pressure to get it started, since most people don’t replace the heads very often. [3]
    • If the tripod head doesn’t seem to be loosening, then some of the locking knobs might not be tight enough. Try double checking those and making sure they’re all locked in place.
  4. After just a few turns, the tripod head should pop off of the main body. Lift it off and put it aside. [4]
    • Hold on to the head as you’re unscrewing it. If it comes loose unexpectedly, you could drop it and break it.
    5. Advertisement
Part 2
Part 2 of 2:

Install the Replacement

PDF download Download Article
  1. Some new tripod heads might come disassembled. In this case, follow the instructions provided to assemble the head correctly before you install it. [5]
    • Commonly, the camera mount isn’t installed on new heads. Simply loosen the knob next to the camera platform and slide the mount into position. Then tighten the knob to lock it in place.
  2. You don’t want your tripod falling while you’re installing the new head, so make sure it’s locked. Set it to the height you want it at, then turn the center column knob clockwise to lock it in place. [6]
  3. Just like with removing the old head, all the parts on the new head need to be locked or it won’t screw on properly. Turn the pan knob clockwise until it stops to lock the head in place. [7]
    • If there are any other adjustment knobs on the new head, tighten them as well.
  4. Most tripods have a mounting screw coming up from the center column that the head attaches to. Hold the new head straight up and line the hole on the bottom up with this mounting screw. [8]
    • Make sure you keep the new head pointed directly up so it doesn’t screw on crooked.
    • Less commonly, some tripod heads have a screw coming out that goes into a slot on the tripod. In this case, you would insert the screw and tighten the tripod knob to lock the head in place. [9]
  5. Press the head onto the mounting screw and turn it to the right. Continue turning until you can’t tighten it anymore to lock it in place. [10]
    • Check under the head to make sure there's no space between the head and tripod mount. The 2 parts should fit snugly together. If there's any space, unscrew the head and reattach it.
  6. Confirm that the new head is attached with a quick test. Loosen the pan knob and move the head around. The head should not unscrew or loosen while you move it around. Check to make sure it stays snug. [11]
    • If you have any problems, unscrew the head and try again. Make sure it stays completely upright as you're screwing it into position. If it's crooked, then it won't attach properly.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If there are any screws or bolts on the tripod head, don’t remove them. The head could fall apart without all the pieces attached. [12]
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      You Might Also Like

      4 Easy Ways to Transfer Photos from a Camera to a Computer
      How to
      Blind a Surveillance Camera
      How to
      Use a Fujifilm Disposable Camera
      How to
      Connect a GoPro to a Computer
      How to
      Connect a Camera to a PC
      How to
      Detect Cameras in a Mirror
      How to
      Install a Security Camera System for a House
      How to
      Transfer GoPro Videos to an iPhone or iPad over Bluetooth
      How to
      Install a Hidden Camera
      How to
      Understand Camera Exposure
      How to
      Attach a Camera to a Tripod
      How to
      Manually Reset a Blink Camera to Fix Common Issues
      How to
      Use a Polaroid One Step Camera
      How to
      Install an Outdoor Security Camera
      Advertisement

      References

      1. ↑ https://youtu.be/Hf5WaGofELc?t=44
      2. ↑ https://youtu.be/oIFnItWdQ70?t=139
      3. ↑ https://youtu.be/oIFnItWdQ70?t=143
      4. ↑ https://youtu.be/oIFnItWdQ70?t=147
      5. ↑ https://www.tripodhead.com/products/instructions-wh-200.pdf
      6. ↑ https://youtu.be/oIFnItWdQ70?t=33
      7. ↑ https://www.tripodhead.com/products/instructions-wh-200.pdf
      8. ↑ https://cdn.shopify.com/s/files/1/3001/7058/files/618-425-Slik-PBH-425DS-Head-Instruction-Manual-1.pdf?7373379816556116253
      9. ↑ https://ikancorp.com/Downloads/eimagetripodkit-usermanual.pdf
      1. ↑ https://cdn.shopify.com/s/files/1/3001/7058/files/618-425-Slik-PBH-425DS-Head-Instruction-Manual-1.pdf?7373379816556116253
      2. ↑ https://www.tripodhead.com/products/instructions-wh-200.pdf
      3. ↑ https://www.tripodhead.com/products/instructions-wh-200.pdf

      About This Article

      Thanks to all authors for creating a page that has been read 28,210 times.

      Did this article help you?

      Advertisement