Download Article
Easy-to-follow steps to make your car less noisy
Download Article
Although making your car entirely soundproof to outside noise is impossible, you can greatly reduce the amount of racket and vibrations by sound-deadening your car. Not only will this create a better ambiance within your car, but it will also allow your audio system to excel without the chatter or resonating panels, or a trembling frame.
Things You Should Know
- Use sound-dampening materials to absorb sound waves and diminish vibrations.
- Try foams or insulation materials to make your car less noisy.
- Insulation generally goes under the carpet, leaving you with a plusher ride.
Steps
Download Article
-
Choose damping materials with which you plan to dampen your car with such as mats, foams, sprays, or insulation; it is recommended to use a combination of these products in order to achieve maximum damping. These damping materials absorb sound waves, eliminate resonance, and diminish vibrations.- Damping mats: These are simple to install damping materials and are used to cover panels in your car to help with sound deadening. They are typically made of either styrene-butadiene rubber or asphaltic panes with adhesive backing and either lower the resonant frequency of the panel or transform the sound vibrations into heat depending on the damping material used in your particular mats.
- Sprays: These come in either professional cans requiring compressors and paint guns for application or easy-to-use aerosol cans. Sprays are used in situations where matting would be too bulky to fit or the weight of the matting would be too heavy such as door panels or kick panels.
- Foams: Foams come in either sheet or spray form. The foam sheets are used just as the damping mats are by laying them over car panels to absorb vibration. Instead of converting the vibrations to heat, as the mats do, the foam sheets disperse the energy throughout the sheet.
- Insulation: This damping material is a thick pane of fibers that absorb sound and is laid underneath the carpet. The most typical type of insulation is jute or micro jute. Although insulation is less effective in regard to sound deadening, it does add thermal insulation to the interior of your car as well as creates a plusher carpet
-
Add weight to panels using damping mats. This will help with the panel's tendency to vibrate causing unwanted noise.Advertisement -
Place the damping mats between 2 of the door panels that are in close proximity to each other, to help reduce the vibrations within the space between the 2 door panels. [1] X Research source -
Place the damping mats inside an engine compartment to reduce rattling noises. The mats contain metal foil backing in order to increase the mat's heat resistance making them able to be near the heat of the engine. Apply them using a contact adhesion glue found at your local auto shop. [2] X Research sourceEXPERT TIPAuto Repair & Design SpecialistHovig Manouchekian is an Auto Repair and Design Specialist and the Manager of Funk Brothers Auto, a family-owned business operated since 1925. With over 30 years of experience in the automotive industry, Hovig specializes in the process of auto repair and maintenance. He is also very knowledgeable in common automotive issues and needs including engine repair, battery replacement, and windshield accessory and maintenance. Hovig's knowledge and hard work have contributed to Funk Brothers Auto winning Angie's List Super Service Award for five consecutive years.Reduce engine noise by soundproofing your hood. Consider soundproofing your hood if you're bothered by engine noise. Apply automotive-grade sound-deadening foam or a pre-cut hood liner under your car's hood. These materials absorb vibrations and dampen engine noise for a quieter ride.
Advertisement
-
Measure the door panels and carpeted areas along the floor you will apply the damping materials of your choice. -
Slice the insulation and/ or matting according to the measurements of the area you plan to place the damping materials. If installing insulation, be sure to pull the carpeting from the body of the car before proceeding to the next step. [4] X Research source -
Paint or spray contact adhesion glue to the body of the car in which you plan to place the damping mats and insulation. -
Place the damping materials on top of the glue, pressing firmly to assure adhesion. -
Spray any foam and spray sound-deadening materials in each crevice as necessary. -
Allow glue and sprays to cure, or dry, in accordance with the directions on each material.
Advertisement
Community Q&A
Search
-
QuestionWould the described addition of sound deadening materials adversely effect the car's ability to float in the event of accidental immersion in deep water? Are the materials flame resistant?Community AnswerIs your car a boat car? Your car doesn't have much ability to float, and sound deadening materials aren't really going to change that.
-
QuestionWhy sound proof my car?Community AnswerAlthough most cars have some form of sound damping already, lots of road noise can enter the car and raise the "noise floor" making it so that you have to play your music louder to have the same perceived loudness. In addition, many cars have panels that resonate and vibrate and certain frequencies (usually the subwoofer range) and cause the panels to rattle, coloring the sound and ruining the clean tone of the speaker. By adding mass to the panels, the resonant frequency is lowered below hearing level of 20 Hz (which isn't produced by most speakers) and just like that, no more annoying rattles.
-
QuestionCan I sound deaden my car on my own, or do I need to go to a workshop to do so?Community AnswerYou can do it yourself. You wouldn't need a workshop for everything described here, nor would you benefit from a car lift or anything. However there's always the possibility of damaging plastic panels when taking them off, so, be prepared for that. It's preferable to do these kind of experiments on a cheap car, not on your brand new pride and joy.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Damping materials
- Contact adhesion glue
- Measuring tape
- Razor blade
- Paintbrush
References
About This Article
Thanks to all authors for creating a page that has been read 359,584 times.
Reader Success Stories
- "I was looking this up online, searched high and low but could find no answers. Boom - there came wikiHow, who rescued me and my quest! Thanks, wikiHow." ..." more
Advertisement
"I was looking this up online, searched high and low but could find no answers. Boom - there came wikiHow, who rescued me and my quest! Thanks, wikiHow."
..."
more
"Just learning more about the things I can do to make my '65 Ford pickup less noisy. I'll be soundproofing in the near future. Thank you."
..."
more
"This helped because it verified my assumption that a mix of the materials would have the best effect."
"Lizard skin ceramic insulation - rolled on Plus dynamat helped."
"The steps were so helpful, thanks for that."
