How to Fix System Interrupts Using 100% CPU on Windows

PDF download Download Article
Troubleshoot and solve high CPU usage from "System Interrupts"
PDF download Download Article

If your Windows PC is running slowly, you'll usually open Task Manager to see which tasks are using up resources. If you see a process called "system interrupts" using 100% of your CPU and it doesn't go away, it usually means there's a hardware or driver issue. This step-by-step guide will show you how to figure out why system interrupts is using 100% of your CPU in Windows 10 and 11, and how to fix the problem.

System Interrupts Using 100% CPU

If "system interrupts" consumes 100% of your CPU, there is likely a hardware or driver issue. Disconnect external USB devices to rule them out, and check for updates and newer versions of drivers for hardware you added. Scan for critical errors to determine the culprit.

Section 1 of 2:

Why System Interrupts Slows Down Your PC

PDF download Download Article
  1. The "System interrupts" process you see in Task Manager helps your hardware and software communicate with each other. If your computer is acting normally, you won't see "system interrupts" take up too much CPU power, even though it's monitoring for interrupts in the background. Or, you may see it use 100% of your CPU for a few seconds before returning to a lower value. If "system interrupts" is using 100% of your CPU for more than a few seconds and it's slowing down your PC, there's either a hardware problem, or a problem with a driver.
    2. Advertisement
Section 2 of 2:

How to Fix System Interrupts Using 100% CPU

PDF download Download Article
  1. If you have any USB devices connected to your PC, such as flash drives, external hard drives, SSDs, or USB hubs, disconnect them to rule out problems with those devices and their drivers. In many cases, the problem is related to external hardware, and disconnecting the problematic device will stop the issue.
    • If your PC "system interrupts" stops hogging your CPU when you disconnect a device, there's a problem with that device or its driver.
      • Try connecting the problem device to a different PC to see if the issue occurs. If it does, the hardware is faulty.
      • If the device works fine on another PC, the issue is likely driver-related. Uninstall the device's driver, then reconnect the device to reinstall a fresh version.
  2. Sometimes Windows' performance slows to a crawl when an update is ready, installing in the background, or is waiting for you to reboot. Updating Windows also updates any outdated drivers—if the "system interrupts" process is popping up because of a driver, an update could fix the issue. To check for updates:
    • Go to Settings > Updates & Security (Windows 10) or Settings > Windows Update (Windows 11).
    • If updates are available, download and install them.
    • If you see a message that says updates have been downloaded and you need to restart your PC, go ahead and restart it.
  3. If you notice system interrupts consuming 100% of your CPU after installing a new graphics card, sound card, or other type of hardware, you may need to replace the drivers that were installed by default with the ones provided by the manufacturer. Go to the manufacturer's website, select your product, then download and install the software provided.
  4. If another application or service is slowing down your PC, the system interrupts process might appear for a long time in Task Manager to indicate it is currently working in the background to "interrupt" the bad communication between hardware and software.
    • To see which processes are using the most resources, open Task Manager and click the CPU tab to display processes in order of utilization. Then try doing the same with the Memory (RAM) tab and Disk tab.
    • If there's a process hogging resources, select it and click End Task . If the system interrupts process stops using 100% of your CPU, the process you ended could indicate where the problem lies.
  5. A malware infection can cause problems that lead to the system interrupts process using 100% of your CPU. Fortunately, Windows has built-in software that makes it easy to scan for viruses and malware. The most reliable way to do this is to perform an offline scan with Microsoft Defender. [1]
    • On Windows 10, go to Start > Settings > Update & Security > Windows Security > Virus & threat protection .
    • On Windows 11, go to Start > Settings > Privacy & security > Windows Security > Virus & Threat protection .
    • Click Scan Options .
    • Select Microsoft Defender Antivirus (offline scan) .
    • Follow the on-screen instructions to check for and quarantine any viruses and malware found.
  6. This tool displays critical hardware and software events, giving insight into which hardware or drivers are causing system interrupts to reach 100% utilization.
    • To run the tool, open the command prompt , type perfmon /rel , and press Enter .
    • Click the red "X" icon on any listed days to see which critical events happened that day. The yellow yield sign icons indicate warnings that are not critical but still important.
    • Compare the date and time of the critical errors and warnings to when you noticed system interrupts using 100% CPU to identify the problem.
  7. Use the "chkdsk" tool at the command prompt to scan for bad sectors and corruption. This tool can also repair such errors, which might resolve the system interrupts problem.
    • Type cmd into the Windows search bar.
    • Right-click "Command prompt" and select Run as administrator .
    • At the elevated command prompt, type chkdsk /f and press Enter . [2] Do not close this window or turn off your computer while the tool is running.
    • If you see the error "Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)," enter Y , then restart your computer.
    • If Chkdsk finds errors, you'll be prompted to correct them.
  8. A simple way to check the physical integrity of your storage device is to install a free popular Windows utility called CrystalDiskInfo. Go to https://crystalmark.info/en/software/crystaldiskinfo/ and click the blue CrystalDiskInfo button to download and run the installer. Once installed, open CrystalDiskInfo to instantly display information about the health of your hard drive or SSD.
    • If you have multiple drives, click the Disk menu to view information about each.
    • A blue health indicator means the status of the drive is "Good." If the indicator is yellow, red, or gray, there is a problem with the drive or its drivers. [3]
  9. If Windows was updated shortly before you started noticing high utilization of the system interrupts process, you can try rolling back the latest update. Not all updates can be rolled back, but it's worth a try. [4]
    • Windows 10: Go to Start > Settings > Update & Security > Windows Update > View update history > Uninstall updates . Click Uninstall next to a recent update to remove it.
    • Windows 11: Go to Start > Settings > Windows Update > Update history > Uninstall updates . Click Uninstall next to a recent update to remove it.
  10. System Restore restores Windows to an earlier point in time. You can use this feature to restore Windows to a date before the system interrupts process started consuming too many resources.
    • Type control panel into the Windows Search bar and click Control Panel .
    • Type recovery into the Control Panel search bar and select Recovery > Open System Restore .
    • Select Next under "Restore system files and settings."
    • Select a restore point and click Scan for affected programs . This shows you which files will be deleted if you restore to this point in time.
    • To proceed, select Close > Next > Finish .
    11. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you determine the error is related to hardware that came with your PC, contact the manufacturer's support team to see if you're still under warranty or if you can order a replacement part.
        Thanks
        Helpful 0 Not Helpful 0
      • If your computer is too slow to troubleshoot without frustration, you can start Windows in Safe Mode to troubleshoot with limited applications and services running.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Test Your Laptop’s Battery Health in Windows 10
      How to
      Ground Yourself to Avoid Destroying a Computer with Electrostatic Discharge
      How to
      Install a Power Supply
      How to
      Convert a Computer Power Supply to a Lab Power Supply
      4 Easy Ways to Check for Driver Updates on a Computer
      How to
      Check PC Specs on a Computer, Phone, or Tablet
      How to
      Disable BIOS Memory Options on a Windows PC
      7 Steps to Check if Your Computer Can Have a Wifi Card
      How to
      Configure Master and Slave in BIOS for Two Hard Disk Drives in a Single System
      How to
      Establish Nvidia SLI
      How to
      Install a Network Interface Card
      How to
      Maintain Lithium Battery
      Advertisement

      References

      1. ↑ https://support.microsoft.com/en-us/windows/help-protect-my-pc-with-microsoft-defender-offline-9306d528-64bf-4668-5b80-ff533f183d6c
      2. ↑ https://www.dell.com/support/kbdoc/en-us/000148643/using-the-chkdsk-utility
      3. ↑ https://crystalmark.info/en/software/crystaldiskinfo/crystaldiskinfo-health-status/
      4. ↑ https://support.microsoft.com/en-us/windows/how-to-uninstall-a-windows-update-c77b8f9b-e4dc-4e9f-a803-fdec12e59fb0#ID0EBF=Windows_10

      About This Article

      Thanks to all authors for creating a page that has been read 6,036 times.

      Is this article up to date?

      Advertisement