2 Easy Ways to Test a Thermometer for Accuracy

PDF download Download Article
PDF download Download Article

You need a thermometer for all kinds of jobs, from checking yourself for a fever to cooking a meal. But what if your thermometer isn’t accurate? That can be a problem. A couple of degrees might not sound like a big deal, but they can be the difference between a delicious meal and a ruined one! Luckily, testing a digital or meat thermometer is pretty simple. The ice bath method is the quickest and easiest. You can also try the boiling water method for another test. Either way, you’ll know if your thermometer is measuring correctly or needs an adjustment.

Testing a Thermometer for Accuracy

  1. Fill a tall glass with crushed or cubed ice.
  2. Pour cold water to the brim of the glass and stir for 15 seconds.
  3. Insert a thermometer into the glass, at least 2 inches into the water.
  4. Hold the thermometer for 30 seconds and confirm it reads 32ËšF.
Method 1
Method 1 of 2:

The Ice Method

PDF download Download Article
  1. Use a tall glass so you have at least a few inches to dip the thermometer in and get an accurate measurement. Take the glass and fill it right up to the brim with ice. [1]
    • Don’t skimp on the ice. You’ll need to chill the water down to its freezing point, and 1 or 2 cubes won’t be enough.
    • Some guides recommend using crushed ice, while others say cubes are better. [2] Either should work, as long as you fill the glass completely.
  2. Watermark wikiHow to Test a Thermometer
    Just like with the ice, fill the glass right up to the brim. Make sure the water is cold so it doesn’t melt the ice before you can do the test.
    • If the water in your faucet doesn’t come out cold, then you can chill the water in your refrigerator first to cool it down. [3]
    Advertisement
  3. Watermark wikiHow to Test a Thermometer
    Use a spoon or stick and stir the glass well for about 15 seconds. This speeds the cooling for an accurate measurement. [4]
  4. Watermark wikiHow to Test a Thermometer
    Hold the thermometer from the top and slide it at least 2 in (5.1 cm) into the water. Make sure you don’t touch the sides of the glass or you could throw the measurement off. [5]
    • If you do touch the side of the glass, you can just restart the test. For a manual thermometer, just move it back to the center of the glass and let it adjust. For an electronic one, take it out of the water and hit reset, then put it back into the water.
  5. Keep still and hold the thermometer in place without touching the glass. In most cases, 30 seconds is plenty of time to get an accurate reading. [6]
    • Electronic thermometers usually beep when they’re done, so you don’t have to count.
    • If you’re using a dial thermometer, it might take 1-2 minutes for an accurate reading. Be patient and continue holding it in place.
  6. If your thermometer is calibrated and working properly, then it should read 32 °F (0 °C) after about 30 seconds in the water. If not, then your thermometer may need replacement or recalibration. [7]
    • If the thermometer isn’t reading 32 °F (0 °C), you may not have let the water cool off enough. Let it stand for 3 minutes so the ice cools it down. [8]
    • Follow the product directions to recalibrate the thermometer.
    7. Advertisement
Method 2
Method 2 of 2:

The Boiling Water Method

PDF download Download Article
  1. The boiling method is a little trickier than the ice method because the boiling point of water is different at higher elevations. At sea level, the boiling point is 212 °F (100 °C), but the boiling point falls by about 1 °F (−17 °C) for every 550 ft (170 m) of elevation. Look online to find the boiling point of water at your elevation so you measure correctly.
    • You could also use that system to estimate the boiling point at your elevation. If you’re about 1,000 ft (300 m) above sea level, then the boiling point is a little less than 2 °F (−17 °C) lower, or 210 °F (99 °C). You can do this if you don’t have to be very precise.
  2. Make sure the pot has enough space to insert the thermometer at least 2 in (5.1 cm) deep, because you’ll need that much space for an accurate reading. Fill the pot up to the top, but leave some room so it doesn’t overflow while the water is boiling. [9]
    • The initial water temperature doesn’t matter because you’ll be boiling it anyway.
  3. Watermark wikiHow to Test a Thermometer
    Put the pot over a high heat setting and heat the water up. Continue heating until the water reaches a high, rolling boil. Don’t remove it or turn off the heat so it continues boiling during the test. [10]
    • A rolling boil is different from a simmer. The water should be bubbling rapidly.
  4. You’ll have to hold your hand close to boiling water, and you could get burned if any splashes up. Wear a heavy pair of work or cooking gloves to protect your hand during the test. [11]
  5. Hold the thermometer from the top and carefully dip it into the boiling water. Insert it at least 2 in (5.1 cm) in and don’t touch the sides of the pot. Then hold it in place for 30 seconds to take a reading. [12]
    • Remember to keep the flame on while you’re taking the reading. You can turn it down a bit if the pot is going to overflow, but keep the heat on.
  6. If you’re at sea level, then an accurate thermometer should read 212 °F (100 °C) when you take this measurement. If you’re at a different elevation, then confirm that the reading lines up with the correct boiling point.
    • If your thermometer doesn’t read the correct boiling point, then it needs calibration or replacement.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      Using the Ice Method

      • Glass
      • Ice
      • Cold Water
      • Spoon or stirrer

      Trying the Boiling Water Method

      • Pot
      • Water
      • Stovetop or flame
      • Gloves

      Tips

      • Forehead thermometers, or temporal artery scanners, are electronic and usually perform a self-test every time they're turned on. If you're getting inconsistent readings, the scanner may be dirty. Try cleaning it off according to the product instructions. [13]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Read a Ruler
      How to
      Read a Tape Measure in Inches or Centimeters
      How to
      Measure Centimeters
      How to
      Read a Vernier Caliper for Super Precise Measurements
      How to
      Measure 2/3 Cup with a 1/4 Measuring Cup
      How to
      Use a Ruler to Measure in Millimeters (Plus Estimating Lengths)
      Easy Ways to Measure Liquids When You Don’t Have a Measuring Cup
      How to
      Calibrate a Digital Scale With and Without Weights
      How to
      Calculate Angles
      How Big Is an Inch? Here's How to Measure Accurately
      How to
      Read a Caliper
      How to
      Measure Without a Ruler
      How to
      Use Calipers
      How to
      Read a Dial Indicator
      Advertisement

      References

      1. ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
      2. ↑ https://youtu.be/fxiVzg8mjfo?t=35
      3. ↑ https://youtu.be/fxiVzg8mjfo?t=28
      4. ↑ https://youtu.be/fxiVzg8mjfo?t=47
      5. ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
      6. ↑ https://extension.sdstate.edu/how-calibrate-meat-thermometer
      7. ↑ https://extension.sdstate.edu/how-calibrate-meat-thermometer
      8. ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
      9. ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
      1. ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
      2. ↑ https://youtu.be/Y4MMRAu-Ars?t=120
      3. ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
      4. ↑ https://www.fgb.com.au/sites/default/files/Forehead%20thermometer.pdf

      About This Article

      Article Summary X

      To test a thermometer, first fill a tall glass with ice. Pour cold water into the glass right up to the brim, then stir it for 15 seconds. Insert your thermometer into the water without touching the sides of the glass. After 30 seconds, your thermometer should read 32° F. If it doesn't, it may need to be replaced or recalibrated. To learn how to test a thermometer using boiling water, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 68,000 times.

      Did this article help you?

      Advertisement