Download Article
Download Article
You need a thermometer for all kinds of jobs, from checking yourself for a fever to cooking a meal. But what if your thermometer isn’t accurate? That can be a problem. A couple of degrees might not sound like a big deal, but they can be the difference between a delicious meal and a ruined one! Luckily, testing a digital or meat thermometer is pretty simple. The ice bath method is the quickest and easiest. You can also try the boiling water method for another test. Either way, you’ll know if your thermometer is measuring correctly or needs an adjustment.
Testing a Thermometer for Accuracy
- Fill a tall glass with crushed or cubed ice.
- Pour cold water to the brim of the glass and stir for 15 seconds.
- Insert a thermometer into the glass, at least 2 inches into the water.
- Hold the thermometer for 30 seconds and confirm it reads 32ËšF.
Steps
-
Fill a tall glass with ice. Use a tall glass so you have at least a few inches to dip the thermometer in and get an accurate measurement. Take the glass and fill it right up to the brim with ice. [1] X Research source
- Don’t skimp on the ice. You’ll need to chill the water down to its freezing point, and 1 or 2 cubes won’t be enough.
- Some guides recommend using crushed ice, while others say cubes are better. [2] X Research source Either should work, as long as you fill the glass completely.
-
Pour cold water into the glass. Just like with the ice, fill the glass right up to the brim. Make sure the water is cold so it doesn’t melt the ice before you can do the test.- If the water in your faucet doesn’t come out cold, then you can chill the water in your refrigerator first to cool it down. [3] X Research source
Advertisement -
Stir the ice and water for 15 seconds. Use a spoon or stick and stir the glass well for about 15 seconds. This speeds the cooling for an accurate measurement. [4] X Research source
-
Insert the thermometer into the glass without touching the sides. Hold the thermometer from the top and slide it at least 2 in (5.1 cm) into the water. Make sure you don’t touch the sides of the glass or you could throw the measurement off. [5] X Research source
- If you do touch the side of the glass, you can just restart the test. For a manual thermometer, just move it back to the center of the glass and let it adjust. For an electronic one, take it out of the water and hit reset, then put it back into the water.
-
Hold the thermometer inside the glass for 30 seconds. Keep still and hold the thermometer in place without touching the glass. In most cases, 30 seconds is plenty of time to get an accurate reading. [6] X Research source
- Electronic thermometers usually beep when they’re done, so you don’t have to count.
- If you’re using a dial thermometer, it might take 1-2 minutes for an accurate reading. Be patient and continue holding it in place.
-
Confirm that the thermometer reads 32 °F (0 °C). If your thermometer is calibrated and working properly, then it should read 32 °F (0 °C) after about 30 seconds in the water. If not, then your thermometer may need replacement or recalibration. [7] X Research source
- If the thermometer isn’t reading 32 °F (0 °C), you may not have let the water cool off enough. Let it stand for 3 minutes so the ice cools it down. [8] X Research source
- Follow the product directions to recalibrate the thermometer.
Advertisement
-
Look up the boiling point at your elevation. The boiling method is a little trickier than the ice method because the boiling point of water is different at higher elevations. At sea level, the boiling point is 212 °F (100 °C), but the boiling point falls by about 1 °F (−17 °C) for every 550 ft (170 m) of elevation. Look online to find the boiling point of water at your elevation so you measure correctly.
- You could also use that system to estimate the boiling point at your elevation. If you’re about 1,000 ft (300 m) above sea level, then the boiling point is a little less than 2 °F (−17 °C) lower, or 210 °F (99 °C). You can do this if you don’t have to be very precise.
-
Fill a deep pot with water. Make sure the pot has enough space to insert the thermometer at least 2 in (5.1 cm) deep, because you’ll need that much space for an accurate reading. Fill the pot up to the top, but leave some room so it doesn’t overflow while the water is boiling. [9] X Research source
- The initial water temperature doesn’t matter because you’ll be boiling it anyway.
-
Bring the water to a rolling boil. Put the pot over a high heat setting and heat the water up. Continue heating until the water reaches a high, rolling boil. Don’t remove it or turn off the heat so it continues boiling during the test. [10] X Research source
- A rolling boil is different from a simmer. The water should be bubbling rapidly.
-
Put gloves on. You’ll have to hold your hand close to boiling water, and you could get burned if any splashes up. Wear a heavy pair of work or cooking gloves to protect your hand during the test. [11] X Research source
-
Insert the thermometer and hold it in the water for 30 seconds. Hold the thermometer from the top and carefully dip it into the boiling water. Insert it at least 2 in (5.1 cm) in and don’t touch the sides of the pot. Then hold it in place for 30 seconds to take a reading. [12] X Research source
- Remember to keep the flame on while you’re taking the reading. You can turn it down a bit if the pot is going to overflow, but keep the heat on.
-
Confirm that the thermometer reads the boiling point at your elevation. If you’re at sea level, then an accurate thermometer should read 212 °F (100 °C) when you take this measurement. If you’re at a different elevation, then confirm that the reading lines up with the correct boiling point.
- If your thermometer doesn’t read the correct boiling point, then it needs calibration or replacement.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You’ll Need
Using the Ice Method
- Glass
- Ice
- Cold Water
- Spoon or stirrer
- Pot
- Water
- Stovetop or flame
- Gloves
Tips
- Forehead thermometers, or temporal artery scanners, are electronic and usually perform a self-test every time they're turned on. If you're getting inconsistent readings, the scanner may be dirty. Try cleaning it off according to the product instructions. [13] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Always be careful with the boiling water method or you could get a serious burn.Thanks
Advertisement
References
- ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
- ↑ https://youtu.be/fxiVzg8mjfo?t=35
- ↑ https://youtu.be/fxiVzg8mjfo?t=28
- ↑ https://youtu.be/fxiVzg8mjfo?t=47
- ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
- ↑ https://extension.sdstate.edu/how-calibrate-meat-thermometer
- ↑ https://extension.sdstate.edu/how-calibrate-meat-thermometer
- ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
- ↑ https://extension.umn.edu/preserving-and-preparing/food-thermometers
About This Article
Article Summary
X
To test a thermometer, first fill a tall glass with ice. Pour cold water into the glass right up to the brim, then stir it for 15 seconds. Insert your thermometer into the water without touching the sides of the glass. After 30 seconds, your thermometer should read 32° F. If it doesn't, it may need to be replaced or recalibrated. To learn how to test a thermometer using boiling water, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 61,617 times.
Advertisement
