What Causes Brake Pad Grinding?

Download Article

Put an end to those loud braking noises

Written by Ed Beery | Edited by Eric McClure

Last Updated: August 27, 2023 Fact Checked

Download Article

Bad Brake Pads

|

Caliper & Disc Issues

|

Debris in the Brakes

|

ABS Engagement

|

Rusty Rotors

|

Structural Issues

|

Warnings

If your brakes make a grinding noise when you press the brake pedal, it’s likely that you simply need new brake pads. Brake pad manufacturers intentionally design pads to make noise when it’s time to change them, so this is their way of letting you know it’s time to get them swapped out. However, there are a handful of additional issues that could be causing the grinding noise. Luckily, it’s easy to narrow it down based on when the noise occurs. In this article, we’ll show you how to diagnose and fix the issue.

This article is based on an interview with our automotive specialist, Ed Beery, owner of InTechgrity Automotive Excellence. Check out the full interview here.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Section 1 of 6:

If your brakes start grinding after screeching…

Download Article

It’s a sign you need new brake pads. The high-pitched screeching noise is there on purpose—brake pads are supposed to make an obnoxious noise when they’ve worn down, kind of the same way your smoke detector chirps to let you know the batteries need to be changed. But if you’ve been ignoring that screeching (called “scrubbing”) and it suddenly turns into grinding, you really need new brake pads . You’ve worn the pads down to the caliper housing.
- How to Fix It: Go to a mechanic and get some new brake pads ASAP. The grinding noise indicates you’ve got only a few thin layers left on your brake pads.
- Brake pads naturally wear down over time and they’re meant to be swapped out every 30,000–45,000 miles (48,000–72,000 km), so if you’re due for a new set, this is almost 100% the cause of the noise.
- Expect to spend around $100-300 for each axle.

Section 2 of 6:

If your brakes start grinding with no screeching…

Download Article

The brake calipers or discs need to be realigned. If you hear grinding when you press the brakes but there was never any screeching noise, it means either the calipers that hold the brake pads in place or the rotors the brake pads press against aren’t installed correctly. This is especially likely to be the case if you (or someone else) were just working on your brakes or tires. ^{[1]
X
Research source}
- How to Fix It: See a mechanic to get your calipers and/or rotors replaced or adjusted .
- Each caliper and disc set will cost roughly $300-500 depending on the complexity of your brake’s design.

Section 3 of 6:

If your brakes grind while you’re at speed…

Download Article

You’ve probably got rocks or pebbles stuck in the rotor. The rotors spin when your car moves, and when you press the brake, the calipers shift inward to press the brake pad against the rotor and slow it down. So, if you hear grinding when you aren’t braking, it’s a sign that something in between the rotor and the brake pad is causing noise. If it’s a grinding noise, you’ve probably got some small stones or gravel stuck in there.
- How to Fix It: Park your car and wait for the brakes to cool off. Then, grab a butter knife or some other thin object and run it between each caliper and rotor. If you find any blockages, knock them out and you should be good to go.
- If you do have to pay a mechanic for this one, it shouldn’t cost more than the shop’s minimum labor cost since they’re not actually repairing anything.

Section 4 of 6:

If your brakes grind when you slam on them…

Download Article

Your ABS system is working as intended. If you heard grinding and felt some odd stuttering when you slammed on the brakes to avoid an obstacle, don’t fret—there’s nothing wrong with your brakes. The automatic braking system (ABS) triggered to keep your car from skidding. It does this by repetitively pumping your brakes to help slow the car down in a controlled manner. At high speeds, this sounds (and often feels) like grinding. ^{[2]
X
Research source}
- How to Fix It: Everything is working as intended. Just slow it down out there!
- If this happens regularly to you, it’s a pretty good sign that it’s time to start driving a little more responsibly . The ABS should only be kicking in on rare occasions when there’s extreme weather or acts of God on the road.

Section 5 of 6:

If the car hasn’t been driven in a while…

Download Article

Your rotors are probably just rusty, but this is not a problem. Brake rotors these days are almost always made out of cast iron, steel, aluminum, or some combination of the three. That makes them relatively inexpensive and easy to manufacture. Unfortunately, it also means they’ll rust if you don’t drive often. This actually isn’t a huge deal so long as your brakes are responsive and working and the grinding goes away after a few trips. The rust will grind away and your rotors should go back to silent after a few trips. ^{[3]
X
Research source}
- How to Fix It: If the grinding sound doesn’t go away but your brakes are still working as intended, see a mechanic and ask them to grind the rust off. Mechanics have a special cleaning tool for this.
- If the grinding doesn’t go away and your brakes aren’t functioning correctly (i.e. they’re slow to kick in or take too long to stop your vehicle), have a mechanic replace your rotors .
- If you need new rotors, you may need to spend $250-500 per rotor. If you only need to get the rust grinded off, it shouldn’t be more than $200-300 altogether.

Section 6 of 6:

If the grinding continues after replacing the brake pads…

Download Article

Go to the mechanic if the grinding won’t go away. Grinding that shouldn’t be there should almost always go away after you’ve replaced the pads or the rotors, so if the grinding keeps happening, it’s a sign there’s something else going on that needs to be addressed. ^{[4]
X
Research source} It’s possible that you have:
- Faulty wheel bearings . The bearings connect your tires to the axles, so if one of the bearings has gone bad, it can cause all kinds of weird noises when you slow down.
- Poor lubrication . Most brake pads these days come pre-lubricated, but a handful of them need additional lubrication . If you or your mechanic missed this, you’ll need to re-lubricate them.
- Bad brake calibration . There are sensors that monitor your brakes and control the stopping power when you press the pedal. One of those sensors may need to be replaced.
- Warped rotors . If a rotor isn’t perfectly flat, it’ll grind against the caliper and brake pad at a strange angle and cause odd noises.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Don’t ignore grinding brakes—especially if your braking power seems to be diminishing. The grinding noise normally indicates your brake pads are at the end of their lives, and continuing to drive could be dangerous.

Thanks
Helpful 0 Not Helpful 0

[1]

[2]

[3]

[4]

Log in

What Causes Brake Pad Grinding?

Steps

Get Car Support Solve Any Problem

If your brakes start grinding after screeching…

If your brakes start grinding with no screeching…

If your brakes grind while you’re at speed…

If your brakes grind when you slam on them…

If the car hasn’t been driven in a while…

If the grinding continues after replacing the brake pads…

Expert Q&A

Tips

Warnings

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories