Download Article
Download Article
You don't need to be a pro to perfectly buff the clear coat on your car. With the proper tools and material, some time, and some elbow grease, you can have that high-gloss finish you want.
Steps
Download Article
-
Wait a day or so to let the clear coat harden if the finishing is new. At this point, if you see "orange peel" or "trash" on the surface, wet sand with 1000 or 1200 grit wet or dry automotive grade sandpaper. This will smooth out the surface and allow for a super shine finish. [1] X Research source -
Get a buffer. A variable speed buffer with a lambs wool pad will be necessary to do a nice job. Single speed buffers are not recommend because of the increased chance of burning the finish down to the color coat. [2] X Research sourceAdvertisement -
Use a product such as 3M Micro-finish which can be purchased at automotive paint stores. -
Apply to an area no more than two feet square at a time. Keep the buffer moving and watch how the finish is changing to a high gloss. [3] X Research source -
Experiment with the speed to achieve the best results. Don't overdo it. -
Wipe off any residue on the surface after compounding the area. -
Replace the lambs wool buffing pad with a polishing pad. This may be terry cloth or foam. -
Apply a high quality liquid or paste wax and again, in a small area buff until you are satisfied with the results. You can run the buffer at a higher speed for this step. If there are swirl marks remaining on the finish you can also purchase a swirl mark remover. This will give you a professional high gloss finish. [4] X Research source
Advertisement
Community Q&A
Search
-
QuestionCan I water sand between clear coats?Community AnswerJust let it air dry and use extremely fine sand paper.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Cover windows with masking paper to ease clean up. Stay away from items with a black finish as the compounds will cause them to become discolored gray and impossible to remove, i.e mirror frames, body side moldings, bumpers, etc.Thanks
- Before turning on the buffer wipe the compound slightly with the buffer pad to prevent the compound from "slinging" causing it to fly all over.Thanks
- Keep surface cool to avoid burnishing.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Keep the power cord away from the spinning buffer as this could result in injury and damage to the cord. Take the power cord and try to keep it behind you making a loop and put it through a belt loop.Thanks
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 249,730 times.
Reader Success Stories
- "This article indeed was very helpful. Teaches a lot about buffing and polishing after applying clear coat by using a buffer/polisher. I was unable to get high gloss finish on my car, but after reading this article I am going to do all that is written here. Let's see what result I get." ..." more
Advertisement
92%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"This article indeed was very helpful. Teaches a lot about buffing and polishing after applying clear coat by using a buffer/polisher. I was unable to get high gloss finish on my car, but after reading this article I am going to do all that is written here. Let's see what result I get."
..."
more
"Clear and to the point so I can keep it near while working. Excellent."
"Great, clear, easy-to-follow steps. "
