PDF download Download Article PDF download Download Article

In many backyards, there’s a house for the dog, the birds and now you can have one for butterflies. A butterfly house is an enclosed wooden structure with narrow slits on the front, designed to mimic a tree. This encourages the insects to congregate around the house. The houses come in all shapes and even more sizes. Many butterflies will use it as a mating ground, feeding area or protection from predators and harsh weather. Build your own butterfly house to attract one of the nearly 17,000 species to your garden and watch them come and go with delight.

Part 1
Part 1 of 3:

Making the Pieces

PDF download Download Article
  1. To create the butterfly house, you will need pine wood which can be purchased at your local hardware store. Your materials do not need to be perfectly sanded down or anything of that nature. Using raw wood will work just fine. You will be able to create an entire butterfly house with two boards. One measuring 1" x 8" x 8' and the second measuring 1" x 10" x 4'.
    • Consider recycling scrap wood you have around the house if available.
    • If purchasing materials from a store, ask to have everything cut to size for easier assembling and time savings once at home.
  2. With a measuring tape, mark three equal parts, each measuring 30” in length. These three pieces will serve as the back and two sides. The remaining piece of this particular board will be used as the bottom of the house. [1] You can customize your butterfly house as you see fit and adjust the measurements to create a larger or smaller version.
    • Using the jigsaw, cut out each piece. Take every precaution when using power tools like this one. Read all instructions, wear gloves and goggles. If you are not trained in using this machine, a handsaw will work as well.
    Advertisement
  3. From the same board, the remaining piece of wood will measure 8” x 5 ¾”, cut this piece to measure 5 ¾” x 5 5/8”.
  4. Out of this piece, you will create the front of the house, the roof and roof block (the roof block with sit inside the house when closed to seal the unit shut). Measure and cut 30” x 5 5/8” to make the front. Measure and cut 5 ¾” x 5 ½” to make the roof block.
  5. From the remaining piece of this board, measure and cut 9 ½” x 8 5/8” for the roof.
  6. Butterflies will use the slots to enter and exit the house. Grab the front piece you’ve just made (the 30” x 5 5/8” piece). Measure and mark six vertical rectangles. Each should measure 4” long x ½” wide. These can be spaced as you see fit. Using the ½ inch drill bit, drill a hole through the top and the bottom of the rectangles to create 6 pairs of holes. [2]
    • Using the jigsaw, cut the space in between each of the paired holes to create the openings/slots.
    • You can add more or less slots if you prefer.
    • Keep in mind that making the slots any larger will encourage other, perhaps unwanted, animals to make this house their home.
  7. Advertisement
Part 2
Part 2 of 3:

Building the House

PDF download Download Article
  1. Lay the back piece flat on your work surface with a side piece up against it to create a 90 degree angle. Attach the first side piece to the back edge using a screw gun. You will only need three screws to attach the side. They should be placed 10” apart. One at the bottom, one in the middle and one at the top.
    • Use 1 1/2" deck or galvanized wood screws to prevent rusting.
    • Repeat this for the other side of the house.
    • If a screw gun isn't available, you can use a screw driver.
  2. Put the piece measuring 5 ¾” x 5 5/8”, in the interior of the back and the sides. The floor should be flush with the bottom of the back board and side boards. Using the screw gun or screw driver, drill a screw through the side into the edge of the bottom piece and repeat on opposite side.
    • Drill another screw through the back wall, into the side of the bottom piece.
  3. Slide the 30" long front piece with slots up against the bottom block, mirroring the back piece. Attach with screw gun or screw driver by drilling through the side, into the edge of the front piece. This is exactly how you attached the back piece, every 10”. Place one screw through the front piece, into the bottom block.
  4. Remember, the roof block with sit inside the house when closed to seal the unit shut. The roof block will need to be centered on the underside of the roof. Put the roof piece flat on a table lengthwise vertically. Measure 1” off the back edge and draw a horizontal line. Mark the center of this line which is 4 5/16”. Draw a vertical line from this point to the front edge of the roof piece.
    • Also mark a center line on the shorter edge (5 ½”) of the roof block, which is 2 ¾”.
    • Place the roof block along the horizontal line. Be sure to line up the center marks on both the roof piece and roof block. This will center the roof block on the roof and allow for equal overhang.
  5. Use 1 1/2" galvanized nails and hammer in one on each corner.
    • Nails should be short enough to avoid going completely through the roof.
  6. Check to make sure everything looks secure and stable.
  7. Advertisement
Part 3
Part 3 of 3:

Attracting Butterflies

PDF download Download Article
  1. Mix one part sugar with four parts water and bring to a boil. This will help dissolve the sugar completely. Get a brand new sponge and a small dish. Pour the water into the dish on top of the sponge so it is about halfway full. Place the dish with sponge in the butterfly house. [3]
    • Check the solution daily to ensure it isn’t growing mold or other bacteria.
    • Rather than throwing out the remaining sugar water, store it in the fridge for later use.
  2. Butterflies are attracted to bright colors so decorate the house. Pick a color that will really pop amongst the other foliage like yellow, pink or red. Draw flowers and trees on the house for even more appeal.
    • Be sure to use non-toxic paint.
    • Consider placing a piece of tree bark inside the house to create a more real environment.
  3. You probably are well aware that butterflies are drawn to certain plants and flowers. [4] Plant a few around your home like strawberry, dandelion or blueberry. These flowers provide nectar for feeding.
    • You can place a few inside the butterfly house too. Aster, clover, honeydew and thistle are great choices.
    • Skip anything that has been treated with pesticides as this could harm them.
  4. Shaded areas will not attract the butterflies. They love to swirl around in the bright sun during feeding and mating. Because of this, having water around will ensure they stick around for longer periods of time.
    • Place a shallow water source outside the house.
    • Pour water on rocks or stone paths in your garden.
  5. This may not sound too appealing to you but butterflies love it! Throw out some fruit cores and peels whenever you have them.
    • Overly ripe bananas are an especially good trick. Simply place pieces around the garden and watch the butterflies swarm.
  6. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Is milkweed good for butterflies?
    Community Answer
    It is the main food source for monarch butterflies, but for others it is poisonous.
  • Question
    Is there a way to make a "butterfly house" without wood or screen?
    Community Answer
    You could use a different material for the structure, but you need the screen so you can see in and the butterflies can breathe.
  • Question
    What if I live in las vegas?
    Community Answer
    The same rules for building a butterfly house apply to all locations.
See more answers
Ask a Question
      Advertisement

      Tips


      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Pesticides will kill the butterflies as well has harm the environment. Search for alternative solutions to unwanted insects like companionship planting.
      Advertisement

      About This Article

      Article Summary X

      To build a butterfly house, you'll need 2 untreated pine wood boards, which you can find at your local hardware store. Once you have the boards, cut them up with a saw so you have 3 equal pieces for the sides and back, a piece for the floor, a piece for the roof, a piece for the front, and a roof block. Then, on the front piece, use a drill and saw to create 6 slots so the butterflies have something to enter through. Next, assemble the house using screws and nail the roof block to the roof. Finally, place the roof on top of the standing butterfly house. To learn how to attract butterflies to a butterfly house, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 99,084 times.

      Reader Success Stories

      • Linda Harrington

        Oct 20, 2019

        "Thank you, wikiHow, for this article! I have been researching how to build a butterfly house, and this is by far ..." more
      Share your story

      Did this article help you?

      Advertisement