PDF download Download Article PDF download Download Article

If you’re lost or staying out in the jungle, a shelter is important if you want to stay dry and safe from the elements. Even if you don’t have any tools, you can work with the natural resources around you to make a sturdy place to sleep. Once you find the right location, you can make a number of different shelters in a short amount of time!

Method 1
Method 1 of 4:

Finding the Right Location

PDF download Download Article
  1. Any moisture on the ground will penetrate through your clothes and make you cold in the night. Feel the ground to see if it’s dry or muddy before settling on a location. A flat spot also ensures that rain won’t run down a slope into your shelter. [1]
    • If you can’t find any flat areas, dig trenches in the ground to divert the water away from where you want to build your shelter.
  2. While you should be a short distance away from a water source, don’t set up your camp next to a river or lake. If it rains or the river floods, you and your shelter could get damp or washed away. Avoid setting your camp in ravines or on low ground for the same reason. [2]
    • Don’t set up in deep valleys since cold air will settle there at night.
    Advertisement
  3. If there are cold winds in your area, trees will help buffet them so you can stay warm. Try to find a place with thick foliage to protect yourself from the elements and to stay hidden. [3]
    • If you want to be found, stay close to open areas where you can attract planes flying overhead.
  4. Check for anything over your head that could cause harm to you or damage your shelter. Look for dead tree limbs, loose rocks, or mud since these could easily break and fall down on top of you.
  5. Advertisement
Method 2
Method 2 of 4:

Constructing a Lean-To

PDF download Download Article
  1. Look for an object that’s at least as long as your body. Lie on the ground next to it to see if it’s taller than you to determine if you have space to comfortably spend the night. On top of being the main support for your lean-to, the rock or tree will act as a barrier against the wind and rain. [4]
    • If you can’t find anything that works, prop a long branch on 2 low tree limbs for the main support.
  2. Set the branches close together at a 45-degree angle so you have enough space to lie down underneath the shelter. Make sure there aren’t any cracks in between the branches or else wind or rain could easily get inside. [5]
    • Use smaller branches to fill in any holes.
    • For more stability, dig a trench in the ground for a place to rest the ends of the branches.
  3. Layer the insulation so it’s about 1 ft (0.30 m) thick. This will help fill any smaller cracks and add further protection against the outdoor elements. [6]
    • You may need to walk around a bit to find enough dead leaves and bark to cover the entire structure.
  4. Use sturdy, heavy branches that will weigh the insulation down. Keep adding branches until the insulation is completely covered. [7]
  5. Collect as much dead foliage as you can and line the ground with it. This will add some comfort to your shelter when you lie down. [8]
    • Avoid using fresh green leaves since you may crush the moisture out of them and get your clothes damp.
  6. Advertisement
Method 3
Method 3 of 4:

Building an A-Frame Shelter

PDF download Download Article
  1. Use branches that are at least 1 1 2 –2 feet (0.46–0.61 m) in length. Stand them on end and lean them together so their tops meet. Use grass, rope, or your shoelaces to tie them together so the tops form a small "V." [9]
    • You could also find tall logs to use.
    • Set the branches so the opening under the branches faces away from the wind.
  2. Make sure the stick is mostly straight. Rest one end in the small "V" at the top of the A-frame and the other end on the ground. Check to see if you have enough room to lie under the shelter completely. Tie the longer branch to the frame so the longer branch doesn’t move around or shift. [10]
    • Dig a small hole to rest the other end of the branch in if you want added stability.
  3. Use at least 6–10 in (15–25 cm) of bedding so you aren’t lying on the ground. Avoid using any fresh green leaves since these could easily transfer moisture to your body.
  4. Lay the branches on each side of the shelter so they are at a 45-degree angle to the main branch. Break or cut any branches that extend past the long branch so your shelter is compact. Fill in all the cracks between the branches as best as you can.
    • Use smaller branches to cover any holes or cracks and to prevent debris from falling through.
  5. Start from the bottom of the structure and layer the debris onto the framework you made. The thicker you make your insulation, the warmer you’ll stay and the more camouflaged you’ll be. Aim to layer the leaves at least 2 ft (0.61 m) thick.
    • Cover the opening of your A-frame with more sticks if you want to completely close your shelter when you’re sleeping or away.
  6. Advertisement
Method 4
Method 4 of 4:

Making a Teepee

PDF download Download Article
  1. Use branches that are the same length so they’re easier to manage. Tie one end of the branches together with plant fiber, rope, shoelaces, or a belt before standing them upright. Set the branches so they are equal distances apart. [11]
    • The size of the branches depends on how many people you want to fit inside. At the very least, spread the 3 branches far enough apart for you to comfortably lay down.
    • Lean the branches in a circle against a tree trunk if you want extra support.
  2. Find more branches that are similar in length to surround the rest of the teepee. When you place one branch, go to the opposite side of the teepee and place another branch so your teepee stays balanced.
    • Remember to leave a gap on one side so you can get in and out of your shelter. [12]
  3. Once you have the main structure built, look for any cracks or holes in the frame of your teepee. Use smaller and thinner sticks to fill them in so wind and rain doesn’t get inside of your shelter. Try to cover as many of the cracks as you can. [13]
  4. Use sturdy branches that have leaves on them to add extra insulation to your teepee. Lean them evenly across the teepee so it is insulated as much as possible. [14]
    • Dead leaves and debris will blow away in strong winds unless you use more branches to hold them in place.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Don't I need to cover the walls with something, like mud or clay or sticks?
    Community Answer
    Actual, jungle leaves are big enough and dense enough water will not get through if you stack enough of them on the roof of your shelter.
  • Question
    How do I deal with strange noises in the jungle at night?
    Community Answer
    Do your best to ignore them and don't let your mind wander. (Bring earplugs if you can/need to.) If nothing works, try listening to the noises intensely for a few minutes and notice that nothing happens. That might help alleviate your fears.
  • Question
    What do I do about the roof?
    Community Answer
    Make a triangular shaped shelter instead, so that the roof is already made for you. It's faster and you shouldn't need any more room if the shelter is just for sleeping and small tasks.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Many of these structures are temporary and will need to be repaired or rebuilt after severe weather.
      • Watch for insects and poisonous plants in your bedding before you lie down.
      • Watch out for any dangerous objects above you and your shelter, such as dead limbs, rocks, or mud.
      Advertisement

      Things You’ll Need

      Constructing a Lean-To

      • A sturdy, large surface, like a rock or log
      • Branches
      • Dead leaves

      Building an A-Frame Shelter

      • Branches
      • Rope or something to tie branches together
      • Dead leaves
      • Jungle debris

      Making a Teepee

      • Branches
      • Rope or something to tie branches together

      About This Article

      Thanks to all authors for creating a page that has been read 113,301 times.

      Reader Success Stories

      • Monica Martin

        Dec 26, 2016

        "wikiHow covers all different aspects and ranges of how to do anything! I especially like the simplicity and ..." more
      Share your story

      Did this article help you?

      Advertisement