Download Article
Download Article
An outdoor barbecue is a great DIY project that anyone with a little masonry experience can handle. To build a simple but effective brick grill, choose a safe location and start by laying a concrete footer. Build up the courses of bricks layer by layer. When you’ve reached a height that’s comfortable for grilling, you can insert some supports for the grill surface. Top it off with some solid bricks, lay the grill surface down, and you’re ready to fire it up!
Building an Outdoor Grill at Home
- Use a spade to dig out your grill area, pour concrete into the hole to create the footer, and draw an outline of the barbeque when the concrete is dry.
- Lay bricks at the corners of the outline, putting ½ inch of mortar between each brick. Fill in the rows, spread gravel in the center, then pour concrete on top of the gravel.
- Build up the bricks on 3 sides and insert steel rebar for support. Lay a few bricks on top, insert more pieces of rebar, and then add extra bricks to finish your grill walls.
Steps
-
Gather your materials. If you’ve got a little bit of masonry experience, this is a project you should be able to handle. Still, you’ll need to make a run to the hardware store to get: [1] X Research source
- Fiber-reinforced concrete mix
- Mortar mix
- A trowel
- A hammer
- Bricks (including some solid bricks)
- A mason’s line or level
- Chalk
- Gravel mix
- 4 inches (100 mm) lengths of steel rebar
- A metal grill surface
-
Dig out the grill area. Use a spade and start digging in your grill area. You’ll want to create a hole that is 4 feet (1.2 m) by 8 feet (2.4 m) and 6 inches (150 mm) deep. Pick a spot that’s away from your house and anything else that could easily catch fire. [2] X Research source
- Keeping the grill area away from your house will also help prevent smoke from blowing in and bothering anyone.
Advertisement -
Pour concrete into the hole to create the footer. Prepare the concrete mix according to the package instructions. Pour it directly into the hole you dug out for the grill area. If you use fiber-reinforced concrete mix, it will be just fine to pour the concrete on bare dirt. [3] X Research source
- Let the concrete dry thoroughly before continuing. This will take 3 to 5 days, typically.
-
Draw an outline of the barbecue on the concrete. Grab your chalk and draw a rectangular outline on the concrete footer. You will need to leave at least 2 inches (51 mm) on all sides for safety reasons. Leave a bit more space if you want to make the barbecue area smaller than this. [4] X Research source
- The interior of the grill will need to be just a little bigger than the grill surface that you bought.
- You can used stretched out mason’s line or a yardstick to make sure the lines you draw are straight.
-
Lay some bricks for a dry fit. Lay two courses of bricks just inside the outline you drew, without using any mortar. Leave 0.5 inches (13 mm) between each brick to account for the mortar that will be added later. Check to make sure that everything looks straight. [5] X Research source
- You can use concrete blocks instead of bricks, if you wish. You will probably lay fewer courses, since standard blocks are taller than bricks.
Advertisement
-
Prepare your mortar mix. You’ll need to have this ready to start laying bricks. Follow the instructions on the mix package, and keep the prepared mortar near your work area so it’s easy to reach. [6] X Research source
- Use bonding cement (prepared to package instructions) rather than mortar if you are making a grill from concrete blocks.
-
Start laying bricks at the corners. Put a line of mortar down just inside the outline on the footer, then lay down some bricks at all the corners. Don’t forget to put 0.5 inches (13 mm) of mortar between each brick. Build the corners up four courses high. [7] X Research source
- To build up each course, smear a layer of mortar (about the thickness of your finger) on top of the bricks on the ground. Lay new bricks on top of the mortar so that they overlap the old ones and create an interlocking pattern. Repeat.
- If you are using concrete blocks, you only need to build up two or three courses at this point.
-
Fill in the rows. Work from corner to corner. Make sure to put some mortar down on the top of each course of bricks before laying the next one down. Continue to leave 0.5 inches (13 mm) of mortar between each brick as well. You’ll now have a rectangle that is four full courses high. [8] X Research source
- Wait for the mortar to dry before moving on to the next steps.
-
Spread a layer of gravel inside the bricks. You can use any ordinary gravel mix that’s available. The type of gravel is not as important as making sure that the footer on the interior of the brick square you have created is covered by a thin layer of it. [9] X Research source
Advertisement
-
Continue building up bricks on three sides. After you have the barbecue base, you’ll need to build it up higher to provide a place for the charcoal and grill surface to rest. Continue laying courses of bricks, but only on three sides. That way, you’ll be able to access the charcoal and grill surface from the open front side.
-
Insert rebar to support the charcoal pan. When you reach about four courses above the base, insert 4 inch (10.2 cm) (100 mm) lengths of steel rebar into the mortar between one course of bricks and the next. The rebar should jut out just a bit into the interior, open space of the grill area. [11] X Research source
- Use a level to check and make sure each course of bricks is level as you lay it.
- Alternatively, you can lay one course of bricks sideways to provide a support surface for the charcoal pan.
-
Add supports for the grill surface. Lay a couple more courses of bricks, and then insert more short pieces of rebar (or bricks laid sideways). This will provide a nice, sturdy support for the grill surface, slightly above the charcoal pan.
-
Top off the grill walls. Add at least a couple more courses to your grill walls. When it has reached a height that you like, place solid bricks on the top row. This will give the grill a finished look. [12] X Research source
-
Surround the grill with more bricks (optional). Once you’ve laid the basic grill, you can lay another row of bricks surrounding the sides and back, but not the front. This is optional, but some people like the look of thicker sides on the grill. You may also find it provides some insulation between the heat of the charcoal and the outside of the grill.
- If you decide to add this layer, just start laying courses of bricks directly around the perimeter of the grill. Keep building up courses of bricks several rows above the top of the center grill area.
- Make sure to leave the front side open.
-
Set the grill surface and charcoal pan in place. Lay the metal charcoal pan down on top of the lower set of rebar supports, and the grill surface on the upper ones.They should fit securely inside the grill, but you can remove them later if you need to clean it. Now you’re ready to fire up your very own grill! [13] X Research source
- Make sure to use only food-grade metal for your grill surface and charcoal pan. Do not use any metal that has been painted or in contact with petroleum or any chemicals.
Advertisement
Expert Q&A
Search
-
QuestionHow do I organize my BBQ area?Sina Kamran is a Hardscaping Specialist and the Owner of Design Scapes, Inc. in Santa Monica, California. With over 15 years of experience, he specializes in customized, site-specific hardscaping and landscaping design/build projects. He's a certified National Concrete Masonry Association (NCMA) designer, a certified installer with the Interlocking Concrete Pavement Institute (ICPI), and a Rain Bird Certified Irrigation Professional. Additionally, Design Scapes, Inc. has many 5-star rated reviews.You need to consider the size of the barbeque grill, and whether you want to install a pizza oven. You can also add a dry bar (a refrigerator for drinks, a countertop, and maybe a few bar stools), but keep in mind that it will be more costly and harder to install.
-
QuestionWhere do I buy the fire pan, grate, and paver?Community AnswerYou can try Walmart, Shopko, or Sam's Club.
-
QuestionDo I need a permit to build an outdoor barbecue?Community AnswerIt depends on your town. Each municipality may be different. Stop in at your city/town hall.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Expert Interview
Thanks for reading our article! If you’d like to learn more about barbecue, check out our in-depth interview with Sina Kamran .
References
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
- ↑ https://www.thisoldhouse.com/yards/21018078/all-about-built-in-barbecue-pits
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
- ↑ https://www.thisoldhouse.com/yards/21018078/all-about-built-in-barbecue-pits
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
- ↑ https://www.quikrete.com/pdfs/projects/barbeques.pdf
About This Article
Thanks to all authors for creating a page that has been read 104,403 times.
Reader Success Stories
- "The step-by-step video helped a lot. I could go back and review it before each step."
Advertisement