How to Change a Truck Tire

PDF download Download Article
Learn how to raise your truck and swap the tires with ease
PDF download Download Article

Like with any other vehicle, your truck’s tires will wear out over time. Changing a truck tire is a relatively simple, but valuable skill to learn. Big trucks have big tires that require heavy-duty tools. To manage the truck’s weight, take proper safety precautions by parking it on a flat and stable surface. Once safely parked, secure it with a jack and jack stands. Removing the tire is straight forward as long as you have a tool capable of loosening the lug nuts. Swap out the old tire with a new one to get your truck back out on the road.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Part 1
Part 1 of 3:

Lifting the Truck

PDF download Download Article
  1. A garage, driveway, or quiet parking lot are a couple of options. Level, stable ground prevents the vehicle from moving while you’re working on the tire. Also, pick a secluded spot where you won’t be disturbed by other vehicles. [1]
    • Hard surfaces are always better than soft ones. Soft soil, for example, may not be able to support the truck’s weight, causing it to fall off a jack.
    • The spot you choose is an important part of changing a tire safely. If you don’t feel safe where you are, you are better off calling for a tow truck.
  2. Chocks are small rubber blocks you can wedge underneath each wheel. Place a chock in front of and behind each tire other than the one you want to change. If you don’t have chocks, use bricks or wooden boards instead. Make sure they are firmly wedged underneath each wheel so it can’t rotate at all. [2]
    • Auto part stores sell chocks, but you can also get them online. They are inexpensive but very effective at keeping you safe while working on a truck.
    • You can also engage the truck’s parking brake for additional safety.
    Advertisement
  3. Most truck wheels have a metal cover over the lug nuts. If you don’t see exposed lug nuts, then you have a cover to remove. Slip the tip of a flathead screwdriver between the metal cover and the rubber tire. Then, pry the cover toward you in a few different spots to pop it off of the wheel. [3]
    • Some hubcaps are held in place by lug nuts. Using a lug wrench, loosen all of the nuts gradually and evenly until you are able to remove them.
    • Most pickup trucks and flatbeds have hubcaps. Bigger vehicles, including semi trucks, often have a mix of covered and uncovered wheels.
  4. Fit the open end of the lug wrench over the nuts one by one to begin removing them. They can be difficult to move at first, but keep trying until you no longer feel any resistance. You may need to step on the wrench or throw your body weight into it to break the lug nut free. [4] Once you feel it come loose, stop turning it and leave it on the wheel. [5]
    • If you’re having a hard time getting stubborn lug nuts to turn, spray a rust-busting lubricant like WD-40 on them.
    • Lug wrenches are fine for pickups and flatbeds, but you will most likely need something stronger for bigger vehicles. Try using a breaker bar if you’re doing it manually.
    • For an easier way to detach the nuts, get a 1 in (2.5 cm) cordless impact wrench. It’s a handheld tool similar to drill, but it has an open end meant to fit over lug nuts.
  5. Select a jack that is strong enough to support the truck’s weight, such as a hydraulic bottle jack. Many vehicles have notches near the wheel wells indicating a safe spot to place the jack. When using a bottle jack, pump the handle up and down to raise the truck. Lift it so the wheel is about 6 in (15 cm) off the ground. [6]
    • For safety, position the jack along a metal part of the frame rather than the plastic exterior. Check the owner’s manual if you are unable to locate the jack point just by looking at the truck.
    • To lift heavier trucks, including dump trucks and similar haulers, use a hydraulic lift instead. Park the truck on the lift, then pump the handle to raise it. The biggest lifts are capable of supporting the additional weight.
    • Really big trucks like semis often don’t need to be lifted. The other wheels are capable of supporting the truck’s weight.
  6. Pull the jack stands up so they reach the bottom of the truck. Then, slide them into place, making sure they are supporting the truck’s metal frame. The jack stands support the weight of the truck so it can’t fall off the jack. Use at least 2 jack stands to hold up the truck and prevent it from falling off the jack. [7]
    • Consider using 4 or more jack stands, especially when dealing with anything heavier than a standard pickup truck.
    7. Advertisement
Part 2
Part 2 of 3:

Replacing the Tire

PDF download Download Article
  1. Now that you have the tire off the ground, you are ready to start pulling it off the truck. The lug nuts come first and should be easy to remove since you loosened them earlier. [8] Twist them as much as you can by hand. If you are unable to remove them all of the way, finish the job with a lug wrench or breaker bar. [9]
    • Spray a lubricant like WD-40 as needed to loosen stubborn nuts. You most likely won’t have to use any once the nuts are loose, but have a bottle on hand just in case.
    • Having an impact wrench makes the removal process much easier, although you won’t need it unless the nuts are really stuck.
  2. Wheels are heavy, especially for bigger trucks, so take your time. Once the lug nuts are off, you should be able to pull the tire toward you. Grip the top and bottom of the wheel, then pull it toward you. Wear gloves to keep your hands clean and maintain a firmer grip on the wheel. [10]
    • Some trucks, including semis and some pickups, have double wheels. If you need to access an interior tire, pull it off after removing the exterior tire. You may need to get on your back and go under the car to undo the nuts.
  3. Line up the holes in the wheel with the lug bolts in the wheel well. After sliding the wheel onto the bolts, push it back as far as you can. If you’re replacing a double wheel, fit both wheels onto the lug bolts. Slide the inner wheel back, underneath the truck, before pushing the outer wheel into the wheel well. [11]
    • Positioning the new tire can be tough, especially with bigger trucks. Consider asking someone to help you lift the tire onto the axle.
  4. Don’t tighten them all the way yet. Turn them as far clockwise as you possibly can by hand. This will secure the wheels to the truck so you can begin removing the jack and jack stands. [12]
    • Make sure the lug nuts are secure so the tire can’t fall off while you’re lowering the truck back down to the ground.
    5. Advertisement
Part 3
Part 3 of 3:

Lowering and Securing the Tire

PDF download Download Article
  1. Use the jack to raise the truck by 1 in (2.5 cm). This will give you some room to reach underneath the truck and slide the jack stands toward you. Collapse the jack stands so they are easier to store. [13]
    • Make sure the truck is stable on the jack before attempting to reach underneath it.
  2. If you’re using a bottle jack, remove the handle and attach it to the metal valve near the jack’s base. Pump the handle to gradually bring the jack down until the truck’s tires touch the ground. For a hydraulic lift, lower it until the truck is back on the ground. [14]
    • Don’t remove the jack yet. Wait until you have finished tightening the lug nuts with a lug wrench or breaker bar to ensure the new tire is secure.
  3. Once the new tire is on solid ground, finish securing all the lug nuts. Tighten them until they can no longer be moved. Test the nuts by attempting to remove them by hand. If you are able to turn them, then you haven’t tightened them enough. [15]
    • Use your foot or body weight as needed to help turn difficult nuts. Switch to a breaker bar or impact wrench if you aren’t working on a pickup truck.
    • Remember that bigger trucks can have as many as 10 lug nuts. Make sure you get them all!
  4. Many hubcap wheels fit directly over the side of the wheel and don’t require any special tools to replace. Line up the notch on the hubcap with the valve stem, then push the hubcap onto the wheel. Start with the bottom edge, fitting it against the bottom rim of the tire. Then, fit the upper part against the tire, tapping it into place with a rubber mallet or the soft part of a hubcap removal tool. [16]
    • Some hubcaps screw into place. If you have this kind, fit it over the lug bolts before putting the nuts back into place. Keep the jack underneath the car until you’re done with the installation.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I loosen a tire nut?
    Howard Fleischmann
    Automotive Tire & Repair Specialist
    Howard Fleischmann is an Automotive Tire and Repair Specialist and the CEO of Community Tire Pros & Auto Repair, with ten locations throughout Phoenix, Glendale, Yuma, and Casa Grande, Arizona. Howard specializes in full-service auto repair and tire replacement and care for domestic/imported vehicles and large trucks. Howard’s dedication to Community Tire Pros & Auto Repair has earned their team multiple awards and features including the 2021 Phoenix Magazine AZ State 48 “Best of the Best!”, the 2020 “Best of Phoenix” in Auto Repair, the 2013 Master SBD award, the 2013 National “Top Shop” award by Tire Review, the 2012 Diversity Champions Phx Business Journal, the 2009 BBB Ethics award, the 2008 Phx Chamber of Commerce Impact Award -” Small Business of the Year”, and the 2008 ASU Spirit of Enterprise award. Howard is often referred to as “The Car Guy” for local TV stations and is a regular on TV’s Channel 3 Sunday, Good Morning Arizona monthly.
    Howard Fleischmann
    Automotive Tire & Repair Specialist
    Expert Answer
    If you're having trouble breaking the lug nuts on your tire, try standing on the wrench and putting all of your weight on it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Technically, a tire is the rubber tread fit around a metal rim. If the rim is in good condition, you can pry the tire off , replace it, and reuse the rim .
        Thanks
        Helpful 0 Not Helpful 0
      • Always change old tires out for new ones with the same speed rating and load capacity. A professional mechanic can help you figure this out if you aren’t sure what kind of tire you need.
        Thanks
        Helpful 0 Not Helpful 0
      • Carry a spare and the necessary changing tools with you on the road. Many passenger trucks have a spare hidden underneath the trunk.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Working underneath a truck is very dangerous, so make sure you take all possible precautions. This includes choosing stable ground and putting jack stands underneath the truck before removing the lug nuts.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      • New tire
      • Hydraulic jack or lift
      • Wheel chocks
      • Lug nut wrench or breaker bar
      • Gloves
      • 1 in (2.5 cm) impact wrench

      You Might Also Like

      How to
      Install Snow Chains on Tires
      How to
      Put a Spare Tire on Your Vehicle: 11 Simple Steps
      How to
      Loosen Lug Nuts
      How to
      Let Air Out of a Tire
      How to
      Change Wheel Bearings
      How to
      Remove a Stuck Wheel & Prevent It From Happening Again
      How to
      Check Tire Tread with a Penny
      How to
      Put Tires on Rims
      How to
      Cut a Tire
      How Old Are Your Tires? Reading the DOT Code & Replacing Old Tires
      How to
      Replace Tie Rod Ends
      How to
      Measure Rims
      How to
      Identify Run Flat Tires
      Air Pressure Draining from Your Tires? Here’s What It Means and How to Fix It
      Advertisement

      References

      1. ↑ https://www.popularmechanics.com/cars/how-to/a5855/how-to-change-a-flat-tire/
      2. ↑ https://www.youtube.com/watch?v=lGyfpSfU_T0&feature=youtu.be&t=103
      3. ↑ https://www.youtube.com/watch?v=oL6d4eCtueQ&feature=youtu.be&t=49
      4. ↑ Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      5. ↑ https://www.drivingline.com/articles/dos-donts-and-necessary-tools-for-changing-a-wheel-and-tire/
      6. ↑ https://www.drivingline.com/articles/dos-donts-and-necessary-tools-for-changing-a-wheel-and-tire/
      7. ↑ https://www.drivingline.com/articles/dos-donts-and-necessary-tools-for-changing-a-wheel-and-tire/
      8. ↑ Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      9. ↑ https://www.youtube.com/watch?v=XXAsZWyUsAQ&feature=youtu.be&t=149
      1. ↑ https://www.youtube.com/watch?v=6piAplRf_E8&feature=youtu.be&t=119
      2. ↑ https://www.popularmechanics.com/cars/how-to/a5855/how-to-change-a-flat-tire/
      3. ↑ https://www.youtube.com/watch?v=IeRjU-2N60k&feature=youtu.be&t=364
      4. ↑ https://www.popularmechanics.com/cars/how-to/a5855/how-to-change-a-flat-tire/
      5. ↑ https://www.popularmechanics.com/cars/how-to/a5855/how-to-change-a-flat-tire/
      6. ↑ https://www.youtube.com/watch?v=IeRjU-2N60k&feature=youtu.be&t=528
      7. ↑ https://www.youtube.com/watch?v=_sqlBRT5c7U&feature=youtu.be&t=202

      About This Article

      Thanks to all authors for creating a page that has been read 40,367 times.

      Did this article help you?

      Advertisement