Download Article
Download Article
Door locks are a reliable and universal method of added security. Some locks have extremely intricate structuring, while others can have a more simplified structure. Upvc door locks are an example of a basic locking arrangement, that still offers a dependable level of protection. Replacing a upvc door lock is a fairly easy process that simply requires a lone screwdriver and a new lock cylinder.
Steps
-
Identify the kind of lock you have. There are different variations for upvc door locks, so initially, try to identify the brand of the lock on your door. Some common brands include Avocet, Fulltex GU Ferco, Mila, Roto, and Yale, just to name a few. Knowing the brand of the lock will help tremendously in finding a replacement lock.
- Upvc door locking points can come in various styles (hook, deadbolt, pins, etc.). However, regardless of the intricacy and style of the locking point, the lock cylinder is normally the universal portion of the lock that gets replaced.
-
Unlock and open your door. Open your door so you can see the inside edging of the door and the side of the lock faceplate. You will need to have full access to the side of the lock faceplate to detach the lock.Advertisement
-
Measure your lock. Usually, upvc locks are sized and measured using two standard reference points. The first point of measurement is from the center of the circular portion of the keyhole on the front of the door, up to the center of the square spindle (the connection point where the handle of the door is located). This is called the PZ measurement . The second point of measurement is from the center of the circular portion of the keyhole, to the edge of the lock plate (the exposed plating on the inside edging of the door). This is called the backset measurement .
- Some locks will have two spindle holes, but always take the measurement from the upper spindle hole.
- A common example of measurement dimensions is 35 millimeters for the backset, and 92 millimeters for the PZ.
- Depending on the width of the door, the length of the locking cylinder may vary. To measure the length of the cylinder, measure horizontally across the width edge of the door, from one keyhole to the other (interior keyhole to the exterior keyhole).
Advertisement
-
Remove the retaining screw. Located in the faceplate on the side of the door, the retaining screw is usually even with the bottom of the lock cylinder and keyhole. [1] X Research source Use a screwdriver to twist the retaining screw to the left, loosen it, and remove it from the faceplate.
- This screw is what holds the lock in place.
- The lock cylinder is the portion of the lock within the door. It is the encasing into which the key is inserted through the keyhole.
-
Insert the key into the lock. Once the key is in the lock, turn the key either right, or left about 10 degrees. The direction of your turn will vary depending on which side of the door you’re on. You’re turning the key only about 10 degrees so you can line up the cam (the inner latch of the lock) with the body of the lock, and remove the lock cylinder smoothly.
- This part takes a little bit of trial and error, so try turning the key both directions.
-
Remove the cylinder. Experiment with gently wiggling and tugging on the key while it’s inserted in the lock and turned to both the right and left positions. [2] X Research source In one of the turn positions, the lock cylinder should start to come loose with moderate tugging. Once the cylinder comes loose, pull it toward you, out of its socket.
-
Put the key into the new cylinder. Now that the original lock cylinder has been removed, take out the key from the original cylinder, and place it into the new lock cylinder.
- The new lock cylinder can only be secured into place with the key situated inside.
-
Replace the lock. Turn the key in the new cylinder so the lock cam is flush with the body of the cylinder. The cam needs to be flush with the cylinder body so it can fit smoothly back into the empty socket. Insert the new cylinder all the way into the socket, just as the old cylinder was positioned. Turn the key a little bit so the lock cam can correctly position itself within the socket. Leave the key in the lock.
- You are essentially reversing the steps you took to remove the original lock cylinder.
-
Screw the retaining screw back into the lock faceplate. Insert the retaining screw back into the screw hole. Use a screwdriver to twist the screw to the right, and secure it back into place.
- Test the lock by turning the key both right and left a few times, and gently tug on the key when it is turned to both the right and left position. This tests to see if the lock cylinder is secured in place.
- Only remove the key from the lock once the retaining screw is secured back into place.
Advertisement
Video
Community Q&A
Search
-
QuestionCan I put a second-hand door onto an existing frame?Community AnswerYes, I actually have one like that now. Just be aware of where all of the holes and hinges line up. In most cases, you can just make new holes and places for the hinges, but sometimes it's better (and easier) to just get a different (not necessarily new) door.
-
QuestionPut a new lock in, but when we lock it, the key won't come out. What should I do?Community AnswerRemove the lock and send it back to the store you bought it from. The lock is defective.
-
QuestionWhat do I do if the threading of the holding screw has been ruined? How do I get the lock and screw out?Community AnswerPurchase a set of screw extractors, specially designed drill bits created to extract screws. They can be purchased at home improvement stores, major hardware stores, or online. You will also need a drill with reverse capability.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If the lock cylinder seems particularly tight in the door, try slackening the exterior faceplate of the lock by slightly unscrewing the top and bottom screws of the faceplate.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- If you don’t have the keys to the lock, you may need a locksmith to snap or pick the door. Trying to remove the lock yourself carries the risk of damaging the locking mechanism.Thanks
Advertisement
References
About This Article
Article Summary
X
To change a UPVC door lock, start by unscrewing the retaining screw, which is located on the faceplate on the side of the door. Then, insert the key into the lock, and turn it about 10 degrees to line up the inner latch of the lock with the body of the lock. Next, once the cylinder is loose, pull it out of the socket it's in and take the key out. Finally, insert the key into the new lock, put the cylinder back in the door, and screw the retaining screw back into place. To learn how to choose a replacement UPVC lock, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 230,623 times.
Reader Success Stories
- "I was looking at paying over $90 for a locksmith. With the help of this simple guide, I did the job myself for $20. Fantastic easy-to-follow guide!" ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I was looking at paying over $90 for a locksmith. With the help of this simple guide, I did the job myself for $20. Fantastic easy-to-follow guide!"
..."
more
"In step 2, it is stated turn the key 10 degrees. Maybe so in some locks, but with my one it was 80 degrees, Try both angles if you have a problem."
..."
more
"I carried out the lock change problem free and very quickly thanks to this. "
"Saved me nearly 300 pounds with easy-to-follow instructions."
"Very easy-to-follow advice. Thank you!"
