PDF download Download Article
Common causes (and solutions) for a blinking or erratic check engine light
PDF download Download Article

A flashing or irregular check engine light is your vehicle’s way of trying to get your attention. But what is it trying to say, exactly? If your check engine light is blinking, it could indicate a serious issue with your vehicle's engine. On the other hand, if your check engine light comes on and goes off at random times, the issue may be more minor, but it's still worth addressing before it gets worse. Keep reading to learn the possible causes of a flashing or erratic check engine light and how to address them.

Things You Should Know

  • If your check engine light comes on but turns off randomly, it’s a sign you have a minor issue that comes and goes and is tripping the system.
  • A check engine light that's flashing can be a sign of a serious issue with your vehicle's engine and usually requires immediate attention.
  • Don't continue to drive with a flashing check engine light unless you can make it quickly to a mechanic and your engine is not overheating.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Section 1 of 5:

Why is my check engine light turning on and off randomly?

PDF download Download Article
  1. This is known as an intermittent fault, and it’s a sign that the problem is borderline. Something is close enough to wrong that it occasionally triggers the light, but the problem occasionally recedes to the point that the ECM doesn’t register an error. [1]
    • Check engine lights do not just go away on their own. The odds are very high that an intermittent fault will eventually turn into a solid check engine light, so it's still important to address the issue even if the light occasionally goes off.
    • For example, a loose gas cap is a common cause of a check engine light (air gets in the fuel, which throws the air-fuel-spark mixture off). If it’s only slightly loose and letting air in for short bursts, the light may turn on when air is coming in, then off when there isn’t enough air coming in to mess with the ratio.
  2. Advertisement
Section 2 of 5:

Why is my check engine light flashing?

PDF download Download Article
Section 3 of 5:

How to Diagnose the Issue

PDF download Download Article
  1. Locate the OBD-2 port in your vehicle. In most cases, it’s under a dashboard panel below the steering wheel. Plug the OBD-2 scanner into the 16-pin port and turn your car on. Then, press the “run” or “scan” button and wait for the scanner to return an error code . [3]
    EXPERT TIP

    Hovig Manouchekian

    Auto Repair & Design Specialist
    Hovig Manouchekian is an Auto Repair and Design Specialist and the Manager of Funk Brothers Auto, a family-owned business operated since 1925. With over 30 years of experience in the automotive industry, Hovig specializes in the process of auto repair and maintenance. He is also very knowledgeable in common automotive issues and needs including engine repair, battery replacement, and windshield accessory and maintenance. Hovig's knowledge and hard work have contributed to Funk Brothers Auto winning Angie's List Super Service Award for five consecutive years.
    Hovig Manouchekian
    Auto Repair & Design Specialist

    Start by checking the car's computer (if it's 1996 or newer). Most modern vehicles store trouble codes that can help diagnose problems. Scan the computer for any stored or pending codes – they can be a valuable first step in troubleshooting car issues.

  2. Advertisement
Section 4 of 5:

Common Causes of Check Engine Light Coming On

PDF download Download Article
  1. This is far and away the most common cause of a blinking check engine light. A misfire occurs when one of the cylinders in your engine doesn’t fire (or fires incorrectly). This causes your engine to lose a portion of its power and makes it difficult for your vehicle to maintain speed. [4]
    • This is usually caused by an electrical or mechanical failure, although a misfire can occur so long as there’s a problem with the air/fuel mixture.
    • The cost to repair a misfiring cylinder can range from $100-1,000 depending on the underlying cause. It could be a bad spark plug, a dead ignition coil, ignition system failures, or a crack in your vacuum hose.
  2. This is a best case scenario since it means nothing is physically wrong with your engine. The engine control module (ECM), engine control unit (ECU), and mass airflow sensor (MAF) are all responsible for monitoring your engine and the fuel/air/spark that powers it. If one of those sensors has gone bad though, it can trick your vehicle into thinking something is actually wrong. [5]
    • Replacing and resetting these sensors can run anywhere from $500-1,200 depending on what needs to be replaced.
  3. Your catalytic converter is located under the vehicle between the engine and the exhaust pipe. Its job is to soak up the toxic fumes created by your engine so that you don’t pollute the environment. If that converter is damaged or bad though, those fumes have nowhere to go. If they back up into the engine, it will trigger a flashing check engine light. [6]
    • If your catalytic converter is bad, you may smell rotten eggs in or around your car. This is the sulfur your converter would normally be shielding you from.
    • Catalytic converters can run up to $2,000 depending on what kind of model your vehicle needs.
  4. If you haven’t changed the coolant in your vehicle or your engine thermostat has gone bad, the excess heat in your engine can cause the check engine light to come on and start blinking. Do not continue driving if your engine is running hot and the check engine light is blinking, as this is a sign your engine may catch fire. [7]
    • If you just need a coolant flush, it’ll only cost $100-150. If your thermometer needs to be replaced, it may cost a bit more but it shouldn’t be too expensive.
  5. The transmission is responsible for transferring energy from the engine to the wheels. If it’s not doing that properly, it could create a power differential that puts strain on your engine. If this strain becomes intense enough, it could lead to misfires, engine problems, and all sorts of issues that cause your check engine light to blink. [8]
    • Transmission problems are tricky and often require a specialist. Depending on the underlying problem, this could run anywhere from $100-200, to $6,500 for a transmission rebuild.
  6. Advertisement
Section 5 of 5:

Is it safe to drive with a flashing check engine light?

PDF download Download Article
  1. There are a handful of potential causes for a flashing check engine light that aren’t a big deal, but the issue could be more serious, and it's not worth the risk. If you keep driving and ignore the light, you could be causing irreparable damage to your engine. Even worse, if your engine was misfiring because you don’t have enough oil, your car could catch fire. [9]
    • Unless you’re very close to your mechanic and can get there fast, your safest option is to pull over and call a tow truck to take you to the mechanic.
    • If you do choose to drive to a mechanic, stay in the slow-moving lane on the right, put your hazards on, and be ready to pull over at a moment’s notice. Your car could stall out or die soon.

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance, check out our in-depth interview with Matthew Rava .

      About This Article

      Thanks to all authors for creating a page that has been read 51,540 times.

      Did this article help you?

      Advertisement