How to Clean Oil Off Vinyl Floor

Co-authored by Guy Peters and Megaera Lorenz, PhD

Last Updated: October 19, 2023 References

If you’ve spilled oil or grease on your vinyl flooring, or if you have a set-in, oily stain, you might be worried about how to clean it up without damaging the floor. Fortunately, vinyl is pretty durable stuff, and a little soap and water is all you need to handle most grease spills. In this article, we’ll talk you through a few different ways to tackle oil or grease stains on your vinyl floor.

1

Wipe up fresh spills right away.

Download Article

If you spill oil on any kind of floor surface, don’t wait around for it to set in. ^{[1]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 19 April 2021} Grab a paper towel or sponge and use it to soak up the excess oil. If you use a sponge, toss it in the trash when you’re done so the grease doesn’t go down the drain.

2

Clean the area with water and mild dish soap.

Download Article

Soap will help break down the grease. ^{[2]
X
Expert Source

Erik Bakirov
Cleaning Specialist

Expert Interview. 7 January 2021.} No matter what kind of floor you’re cleaning, soap and water is a good place to start when you’re dealing with an oil spill. ^{[3]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 19 April 2021} Mix 1 part mild dish soap with 10 parts water and dip a soft cloth or sponge in the mixture. Use the cloth to wipe away the grease or oil. ^{[4]
X
Expert Source

Guy Peters
House Cleaning Professional

Expert Interview. 12 July 2021.} Rinse away any soap residue with clean water when you’re done. ^{[5]
X
Research source}
- Avoid using harsh detergents, which could damage your floor or leave a dull residue behind. ^{[6]
  X
  Research source}
- This might work for some greasy stains as well as fresh spills. However, if the grease has really hardened or soaked into the vinyl, you may need something stronger, like ammonia or mineral spirits.

3

Soak up big spills with corn flour.

Download Article

The powder will absorb the oil quickly. If you’ve spilled a lot of oil, pour some cornstarch, corn flour, or baking soda on the spill first. Let it sit for at least 15 minutes to soak up as much oil as possible. Then, wipe the spot with a clean paper towel. ^{[7]
X
Research source}
- You can also sweep the stain away with a broom after letting the corn flour sit for a few hours. ^{[8]
  X
  Research source}

4

Bust grease with vinegar, castile soap, and baking soda.

Download Article

This DIY formula is gentle and effective. Combine 1 cup (240 mL) of distilled white vinegar, ¹ ⁄ ₈ teaspoon (0.62 mL) of castile soap, 1 tbsp (14 g) of baking soda, and 3 cups (0.71 L) of warm water. Pour the mixture into a spray bottle. Shake the mixture well, then spray it onto the oil or grease spot. Let it soak for about 10 minutes, then scrub the area with a cloth or soft-bristled brush. ^{[9]
X
Research source}
- Vinegar, baking soda, and gentle soap are all safe for vinyl floors. ^{[10]
  X
  Research source}
- Rinse the spot with clean water when you’re done.

5

Try ammonia on tough oil stains.

Download Article

Ammonia is a powerful degreaser. It also won’t leave streaks or residue on your floor. ^{[11]
X
Research source} First, clean the stained area with mild dish soap and water. Rinse the spot and dry it thoroughly. Mix 1 tablespoon (15 mL) of ammonia with 1 US quart (0.95 L) of warm water and pour it on the stain. Only use enough to cover the stained area. Let it sit for 10 minutes, then gently scrub the spot with a soft-bristled brush. Rinse the spot with clean water. ^{[12]
X
Research source}
- Never mix ammonia with bleach or other household cleaners! Doing so can cause toxic gases to form.
- Ammonia can sometimes cause cracks to form in vinyl flooring, so use it with caution and only clean small areas with it. ^{[13]
  X
  Research source} If you’re not sure how your floor will react, test the ammonia solution in an inconspicuous area first.

6

Spray WD-40 on set-in grease.

Download Article

Spray a bit of this powerful degreaser directly on the stain, then gently rub it away with a paper towel or soft cloth. When you’re done, clean up the residue with a mixture of 1 cup (240 mL) of apple cider vinegar and 1 gallon (3.8 L) of hot water. ^{[14]
X
Research source}

7

Use rubbing alcohol for greasy makeup stains.

Download Article

Alcohol is great for oily lipstick smudges. It’s also a good general-purpose degreaser. ^{[15]
X
Research source} Pour a little rubbing alcohol on a soft cloth and rub it firmly against the oily mark or stain on the floor. ^{[16]
X
Research source} Rinse the area with clean water and wipe it dry when you’re done. ^{[17]
X
Research source}
- Most cleaning experts agree that alcohol is safe to use on vinyl in small amounts. However, it’s possible that rubbing alcohol could damage the surface finish of some types of vinyl flooring. Test the alcohol in an inconspicuous area before you use it to clean up stains on your floor. ^{[18]
  X
  Expert Source
  
  Guy Peters
  House Cleaning Professional
  
  Expert Interview. 12 July 2021.}

8

Clean greasy or waxy stains with mineral spirits.

Download Article

This cleaner is also called white spirt or mineral turpentine. Mineral spirits are safe for vinyl floors and can remove a wide variety of stains. ^{[19]
X
Research source} They’re also excellent for cutting through oil and grease. ^{[20]
X
Research source} Pour a small amount of mineral spirits onto a soft cloth and use it to gently rub the area until the grease stain is gone.
- Use a damp rag and a couple drops of mild dish soap to wipe the area when you’re done. ^{[21]
  X
  Research source}

9

Lift discolored stains with bleach.

Download Article

Some stains can linger after the grease is gone. If you’ve spilled something like spaghetti sauce on your floor, you may need something that can cut through discoloration in addition to grease. After wiping up the spill and using a solvent (such as dish soap) to clean up any oil, thoroughly rinse and dry the area. Mix 1 part bleach with 4 parts water, dip a rag in the solution, and let the wet rag sit on the stain for 1 hour. Rinse the area with clean water when you’re done. ^{[22]
X
Research source}
- Never mix bleach and ammonia, since this will produce a highly toxic gas. If you used other cleaners on the area, rinse them away thoroughly before using bleach.
- Some cleaning experts and flooring professionals warn that too much bleach could damage a vinyl floor. To minimize possible damage, always dilute bleach before using it, and test it in an inconspicuous area to make sure it doesn’t stain or discolor your floor.

10

Steer clear of spirit solvent floor waxes.

Download Article

These floor treatments can damage vinyl. Spirit solvent waxes may seem like an ideal solution for a greasy vinyl floor. These products are designed to break down oils and grease while also giving your floor an attractive sheen. Unfortunately, these waxes are unsafe for use on vinyl. If you want to clean your vinyl floor with a wax-based cleaner, check the label to make sure it doesn’t contain spirit solvents. ^{[23]
X
Research source}
- Some floor waxes are safe to use on a vinyl floor. Look for a water-emulsion wax, or one that’s labeled for use on vinyl, PVC, or “resilient flooring.”
- Some spirit solvents, such as mineral spirits, are okay on their own for minor cleanup jobs. However, they’re damaging to vinyl in leave-on products like floor waxes.

11

Avoid scraping your floor or using abrasive cleaners.

Download Article

Anything too abrasive will scratch up your floor. If you’re scrubbing away an oil stain on vinyl, stick to a soft cloth, sponge, or soft-bristle brush. ^{[24]
X
Expert Source

Guy Peters
House Cleaning Professional

Expert Interview. 12 July 2021.} Never use steel wool, hard-bristle brushes, or abrasive liquid cleansers. ^{[25]
X
Research source}
- Some websites suggest scraping up oily or greasy stains with the edge of a butter knife or spoon. However, scraping your floor with a metal tool could cause damage. If you need to loosen sticky residue, try scrubbing the spot with a soft nylon brush, instead. ^{[26]
  X
  Research source}
- Some chemical cleansers may also be too harsh for your floor. For instance, some vinyl flooring manufacturers recommend against using acetone on their floors. When in doubt, consult the manufacturer or another flooring expert to find out what’s safe.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

[1]

Expert Source

Jon Gholian
Cleaning Specialist

[2]

Erik Bakirov
Cleaning Specialist

[3]

[4]

Guy Peters
House Cleaning Professional

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

Log in

How to Clean Oil Off Vinyl Floor

Steps

Wipe up fresh spills right away.

Clean the area with water and mild dish soap.

Soak up big spills with corn flour.

Bust grease with vinegar, castile soap, and baking soda.

Try ammonia on tough oil stains.

Spray WD-40 on set-in grease.

Use rubbing alcohol for greasy makeup stains.

Clean greasy or waxy stains with mineral spirits.

Lift discolored stains with bleach.

Steer clear of spirit solvent floor waxes.

Avoid scraping your floor or using abrasive cleaners.

Expert Q&A

Tips

You Might Also Like

Expert Interview

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories