Download Article
Download Article
Dirty sliding glass door tracks can gum up your door and make it difficult to open and close. Cleaning them once a week can help reduce the amount of built-up dirt and grime and will make the door easier to maintain. You can clean your tracks with basic kitchen cleaners or you can use a vinegar and baking soda mixture to pick up stubborn dirt. Once you're done cleaning your tracks, lubricating them will make it so the door opens and closes smoothly.
Steps
-
Open the door and vacuum the tracks. Use a vacuum attachment to reach into the corners of the tracks. Try to lift up any larger pieces of dirt or debris so that it's easier to complete the rest of the cleaning. -
Mix 1 cup (240 ml) of water with a drop of nonabrasive cleaner. Put a couple drops of cleaner, such as Murphy Soap, denatured alcohol, or dish soap, into a bucket with a cup of warm water. Mix the solution together. [1] X Research sourceAdvertisement -
Scrub the tracks with a wire brush and cleaning solution. If you don't have a wire brush, you can use a toothbrush instead. Dip the brush into the solution and scrub on the inside of the tracks. Work your way from one side of the tracks to the other and concentrate on problem areas where there is stuck-on dirt. [2] X Research source -
Wipe down the tracks with a rag or paper towels. Once you've scrubbed the tracks, wipe them down with a paper towel or dry rag. Remove any traces of dirt in the tracks. [3] X Research source -
Close the door and vacuum and scrub the other door's tracks. Slide the door closed and vacuum and scrub the other door's tracks to complete the cleaning. Once you're done, your tracks should be cleaner. [4] X Research source -
Clean your tracks once a week to keep your doors running smoothly. A simple cleaning once a week will help keep dirt and grime out of your tracks and will keep your door working smoothly. Don't let dirt build up in your tracks.
Advertisement
-
Mix equal parts of cold water and white vinegar in a spray bottle. Shake the bottle after you fill it with the vinegar and water to mix it together. This will act as your cleaning solution. -
Open your door and sprinkle baking soda onto the tracks. Sprinkle extra baking soda onto areas that have a lot of dirt buildup. Continue to sprinkle the baking soda until you've covered all the dirt. -
Spray the tracks with the vinegar solution and let it fizz. Soak the entire track in the vinegar solution. Let the solution fizz for 5-10 minutes. This will help pull up stubborn dirt and grime. -
Scrub the area down with a toothbrush or wire brush. Use a wire brush or toothbrush to remove the grime that may have built up on the tracks. Start on one side of the tracks and work your way to the other side. The solution should have loosened up the dirt, making it easier to clean. -
Wipe down the area with paper towels or a rag. Use the rag to lift up excess dirt and grime. Spray the tracks with more of the vinegar solution if they are still dirty. Continue to scrub the tracks from one side to the other until all of the dirt is removed. -
Open the door and repeat the process on the other side. Slide the door open and apply baking soda to the area that you didn't cover. Repeat the process and clean the area down with the vinegar and water solution. Once you wipe it dry, your tracks should be clean. [5] X Research source
Advertisement
-
Spray a silicone lubricant onto the tracks. It's important that you clean your tracks first before you lubricate them. You can purchase a silicone lubricant online or at a department store. Point the end of the nozzle towards the tracks and pull the trigger to spray the lubricant into the tracks. [6] X Research source -
Wipe down the tracks with a dry rag. Once you're done spraying the tracks, wipe down the excess lubricant with a rag. This will also help spread the lubricant so that it's equally distributed on your tracks. [7] X Research source -
Spray lubricant into the hole on the edge of the door. Your sliding glass will probably have a hole on the side. Look for the hole in the door over the tracks or on the inside of the door. Place the straw attached to the lubricant into the hole and press the trigger. This will lubricate the wheels that are inside of your door. [8] X Research source -
Open and close the door several times to break it in. Sliding the door back and forth 5-10 times will help lubricate the wheels attached to the door. [9] X Research source -
Lubricate your tracks once every 2 months to keep it working smoothly. If you notice that your tracks are sticking, lubricating them should help loosen them up. Regular maintenance will prevent this from happening altogether.
Advertisement
The Takeaway: Cleaning Sliding Glass Door Tracks
For a basic cleaning, vacuum loose debris with a hose attachment and wipe the tracks with a soap and water mixture. For stubborn dirt, sprinkle baking soda on them and spray on a mixture of equal parts water and white vinegar. Scrub the tracks with an old toothbrush and rinse them off with water.
Expert Q&A
Search
-
QuestionHow do you clean sliding glass door tracks?Dario Ragnolo is the Owner and Founder of Tidy Town Cleaning, a home cleaning service in Los Angeles, California. His business specializes in residential & commercial cleaning. He is a second generation home cleaning expert, who grew up around his parents cleaning business in Italy.First, vacuum up all the dust and dirt from the tracks. Then, use warm water and mild soap to scrub the area. You may have to remove the door or window to get to all of the dirt. When you're finished, use a cloth to dry everything thoroughly.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
Doing a Simple Cleaning
- Vacuum cleaner with attachment
- Water
- Nonabrasive cleaner
- Wire brush or toothbrush
- Rag or paper towels
Using Baking Soda and Vinegar
- Baking soda
- White vinegar
- Wire brush or toothbrush
- Rag or paper towels
Lubricating Your Tracks
- Silicone lubricant with straw nozzle
- Dry rag
References
- ↑ https://www.nytimes.com/1990/06/03/nyregion/home-clinic-fixing-sliding-patio-doors.html
- ↑ https://www.thisoldhouse.com/ideas/sliding-door-tune
- ↑ https://youtu.be/EFONTm5xGOo?t=51
- ↑ https://youtu.be/EFONTm5xGOo?t=55s
- ↑ https://youtu.be/EFONTm5xGOo?t=55s
- ↑ https://youtu.be/EFONTm5xGOo?t=1m20s
- ↑ https://youtu.be/EFONTm5xGOo?t=1m25s
- ↑ https://youtu.be/AMLXNKtC52Y?t=28s
- ↑ https://youtu.be/EFONTm5xGOo?t=1m30s
About This Article
Article Summary
X
To clean sliding glass door tracks, try using a vacuum and some soapy water. First, vacuum the tracks to get rid of any dust and debris. Then, scrub them with a wire brush and warm soapy water. To remove more stubborn dirt, combine equal parts of cold water and white vinegar in a spray bottle. Then sprinkle baking soda over the tracks and spray the solution over the baking soda to create a fizzing reaction. Wait for 5 - 10 minutes and then scrub the tracks with a toothbrush to remove any grime. For more information about keeping sliding glass door tracks clean, like how to keep them lubricated, read on.
Did this summary help you?
Thanks to all authors for creating a page that has been read 174,548 times.
Reader Success Stories
- "Using the baking soda and vinegar water treatment (soaked for 20 minutes), really worked to get rid of the dirty greasy grime in our sliding door tracks. Now to keep it clean!" ..." more
Advertisement
94%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Using the baking soda and vinegar water treatment (soaked for 20 minutes), really worked to get rid of the dirty greasy grime in our sliding door tracks. Now to keep it clean!"
..."
more
