PDF download Download Article
Sanitize and remove buildup from any Keurig with our complete guide
PDF download Download Article

If your Keurig isn’t working properly or you notice buildup forming, it’s time to clean your machine. Whether you’re descaling your Keurig or just wiping off the exterior, distilled white vinegar is the perfect household solution for you. We even asked cleaning experts for their best advice on cleaning your Keurig, so keep reading to learn how to properly maintain your machine.

Things You Should Know

  • Fill your Keurig’s reservoir with equal parts distilled white vinegar and water. Place a mug underneath the spout.
  • Turn on your Keurig and run the descale or brew cycle. Let the vinegar solution work through the machine until the reservoir empties.
  • Fill the reservoir with clean water and run it through your Keurig to get rid of residual buildup and vinegar.
Method 1
Method 1 of 3:

Descaling a Keurig with Vinegar

PDF download Download Article
  1. 1
    Remove the reservoir filter and K-cup from your Keurig. If you have a filter inside your Keurig’s reservoir, empty the water and pull out the tall plastic piece off of the bottom to remove it. Then, open the machine and take out any K-cups or reusable filters inside. [1]
    • If your brewer has an Auto-Off feature, turn it off as well so the machine doesn’t shut down while you’re cleaning it.
  2. Watermark wikiHow to Clean a Keurig with Vinegar
    Cleaning expert James Sears recommends that you “pour white vinegar into [the] reservoir halfway” and fill up the rest with clean water. [2]
    • If you have hard water at home, fill the Keurig’s reservoir halfway with distilled water instead to help prevent any additional buildup from forming. [3]
    Advertisement
  3. Watermark wikiHow to Clean a Keurig with Vinegar
    Put your largest mug underneath the Keurig’s spout to catch all of the vinegar solution that drains out. Either run your Keurig’s Descale setting or press the “Brew” button so the solution goes through the machine.
    • Some models, such as the Keurig Slim, require you to press and hold certain buttons or find the Descale option in a menu. If you’re not sure if your coffeemaker has a descale setting, check the official support page for your specific Keurig model.
    • If you’re manually pressing the Brew button, use the largest mug setting. Once it finishes, empty the mug and run additional brew cycles until the reservoir empties.
    • Descaling a Keurig typically takes between 20–45 minutes, but it may vary on the model you have.
    • Cleaning expert James Sears explains, “White vinegar…is slightly acidic so it will work to break down the scale, which is mostly mineral deposits such as calcium in your water that have settled over time.” [4]
  4. Rinse out any residual vinegar solution in the reservoir and fill it up with clean water. Press the Brew button on your machine to run the water through your Keurig to get rid of any leftover vinegar and buildup. [5]
    • James Sears, a cleaning expert, recommends “perform[ing] at least 12 cleansing brews” to fully rinse out the vinegar and prevent residual flavors. [6]
    • Some Keurig models recommend waiting for 30 minutes or more before cycling water through the machine. That way, the vinegar solution breaks down deposits in the internal tank. [7]
  5. 5
    Descale your Keurig every 3–6 months. Keurig recommends that you descale your coffeemaker a few times a year to ensure it continues working properly and provides the best flavor. [8]
    • If you have hard water at home, you may need to descale your Keurig every 2–4 months instead.
    EXPERT TIP

    James Sears

    House Cleaning Professional
    James Sears leads the customer happiness team at Neatly, a group of cleaning gurus based in Los Angeles and Orange County, California. James and the team have nine years of experience and offer green cleaning, interior and exterior window washing, and general apartment cleaning services. He provides transformative cleaning experiences by reducing clutter and renewing your home environment. James is a Trustee Scholar at the University of Southern California.
    James Sears
    House Cleaning Professional

    Our Expert Agrees: Descale your Keurig at least every 6 months. You'll need to descale every 3-6 months or whenever you notice scale build-up, which looks like white calcified spots. The harder your water is, the more often you'll need to descale, unless you use distilled or bottled water in your coffee water reservoir.

  6. Advertisement
Method 2
Method 2 of 3:

Cleaning the Exterior and Removable Parts

PDF download Download Article
  1. Watermark wikiHow to Clean a Keurig with Vinegar
    While it depends on the Keurig model, you normally can remove the reservoir tank, lid, drip tray and cover, K-cup holder, and funnel. Carefully pull the pieces apart until they come free and set them aside. [9]
  2. Watermark wikiHow to Clean a Keurig with Vinegar
    Place the components into a sink filled with warm water and a few drops of dish soap. Scrub the parts with a soft, clean sponge or microfiber cloth before letting them air-dry. [10]
    • Keurig pieces are usually dishwasher-safe, but check the user manual before washing them this way.
    • While it’s easier to wash the pieces with soapy water, you may also wipe them clean with a 50-50 solution of white vinegar and warm water.
    • Avoid drying pieces off with a cloth because it could leave behind lint.
  3. Watermark wikiHow to Clean a Keurig with Vinegar
    Use a paperclip to clean the Keurig’s needle . Look for the needle inside the machine where you place the K-cups. Cleaning expert Ryan Santos says, “Use a paperclip or a toothpick to gently clear any clogs or debris from the needle.” [11]
    • Santos recommends, “us[ing] a small, soft-bristled brush to gently scrub the needle and surrounding areas.”
  4. Watermark wikiHow to Clean a Keurig with Vinegar
    Dip the corner of a soft cloth into a 50-50 solution of water and distilled white vinegar. Gently wipe the outside of your Keurig to disinfect it and remove residue from the surface. [12]
    • If you notice stubborn areas with coffee grounds or residue, dip a soft-bristled toothbrush into your vinegar solution and gently scrub the area.
    • James Sears, a professional home cleaner, says to “avoid toxic or synthetic chemicals as much as possible around an item that you will be consuming or drinking from.” [13]
  5. 5
    Reassemble your machine. Once you’ve cleaned all the pieces and wiped down the surface, put your Keurig back together again so you’re ready to brew more coffee.
    • Try to deep-clean the parts of your Keurig about once a month to keep your machine working properly. [14]
  6. Advertisement
Method 3
Method 3 of 3:

Maintaining Your Keurig

PDF download Download Article
  1. Watermark wikiHow to Clean a Keurig with Vinegar
    Rather than waiting for your Keurig to get dirty, throw away the K-cup right after brewing it and wipe up any spilled coffee grounds. Clean off the drip tray and any other splashes to prevent residue from forming.
  2. 2
    Clean your Keurig if your machine isn’t working properly. Some signs that it’s time to clean your machine are white residue spots, longer brew times, coffee grounds in your mug, or stale flavors. If you notice any of these signs, then carve out some time to clean and descale. [15]
  3. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I clean my coffee maker?
    Jonathan Tavarez
    Property Hygiene Enabler
    Jonathan Tavarez is the Founder of Pro Housekeepers, a premium cleaning service headquartered in Tampa, Florida catering to residential and commercial clients across the United States. Since 2015, Pro Housekeepers uses rigorous training methodologies to ensure high quality cleaning standards. Jonathan has over five years of professional cleaning experience and has over two years of experience as the Communications Director for the United Nations Association Tampa Bay. Jonathan earned a BS in Management and Marketing from the University of South Florida in 2012.
    Property Hygiene Enabler
    Expert Answer
  • Question
    Can I use vinegar to descale my Keurig?
    James Sears
    House Cleaning Professional
    James Sears leads the customer happiness team at Neatly, a group of cleaning gurus based in Los Angeles and Orange County, California. James and the team have nine years of experience and offer green cleaning, interior and exterior window washing, and general apartment cleaning services. He provides transformative cleaning experiences by reducing clutter and renewing your home environment. James is a Trustee Scholar at the University of Southern California.
    House Cleaning Professional
    Expert Answer
    Vinegar works great for cleaning your Keurig. Just put a 50/50 mixture of white vinegar and water in the reservoir and run a few cycles to clear it out.
  • Question
    After descaling my Keurig machine my coffee I just brewed is thick and cloggy. Any advice?
    Community Answer
    Did you go through the rinsing process at least 12 times (12 large cups worth of clean water after the solution)? You may have to fill the water reservoir a couple of times. This should wash away the scales that you descaled (calcium deposits) as well as residual solution. You want to make sure to not use any pods during the rinsing process, just water. The clumps are probably the calcium and/or the descaling solution. You can also use white vinegar to clean/descale. Again, you will need to thoroughly rinse by running about 12 large cups of water through so that it doesn't taste like vinegar or get clumps. This way is cheaper too!
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Avoid using undiluted vinegar to clean your Keurig because it’s very acidic and could damage internal parts of the machine.
      Advertisement

      About This Article

      Article Summary X

      To get rid of scale and mineral buildup in your Keurig, turn the Keurig on and switch off the Auto Off function. Fill the water reservoir with a 50-50 mixture of distilled water and white vinegar. Don’t put a K-cup in the machine, or use an empty one if your Keurig won’t run without one. Put a mug in the base to catch the vinegar and water as it runs out, then run your Keurig on its longest brewing cycle. When the reservoir is empty, run another cycle with plain, filtered water to rinse out the vinegar. You can also clean the surface of your Keurig with vinegar. Unplug the Keurig and take off all the removable parts. Wash the parts in warm, soapy water and set them aside to dry on a lint-free towel. Gently scrub any grimy areas around the needle assembly with a soft toothbrush dipped in a 50-50 mixture of water and white vinegar. Lightly dampen a clean, soft cloth in the water and vinegar mixture and use it to wipe down the outside of the Keurig, focusing on grime and hard water deposits. Once the removable parts are dry, put your Keurig back together. If you want to learn how to clean the outside surfaces of your Keurig, keep reading the article!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 347,104 times.

      Reader Success Stories

      • April Rose-Sharp

        Oct 19, 2019

        "The instructions are very clear. Article also showed different ways to descale a Keurig. Step-by-step instructions ..." more
      Share your story

      Did this article help you?

      Advertisement