Download Article
Download Article
Would you like to make your own walking stick, hiking staff or wizard staff? You need to start by collecting wood. Follow these instruction to do so without damaging the wood.
Steps
-
Determine the correct length of wood you need. It is recommended that you collect limbs that are equal to your height. This will give a starting stick longer than needed, but this allows for any mistakes made during the cutting. The typical default length for walking canes used for getting around normally in town is 36 inches, longer ones are often preferred for extended hiking. [1] X Research source
-
Know what wood to look for. It may be possible to cut at the thicker end just beyond a bend, curve or burl which serves as a hand grip and is highly decorative. [2] X Research source
- Look for dead wood. An ideal walking stick should be stiff, and living wood may at first be too flexible. In addition, taking wood from a living forest may be environmentally damaging or even illegal in some locations.
- The wood from dead Aspen trees make beautiful smooth walking sticks.
Advertisement -
Find a location to collect wood from. [3] X Research source
- In the desert, some cactus trunks make great sticks. (Note - there are laws in some areas against collecting cactus limbs or trunks.)
- Do not go to your local park and start cutting away. There are laws against damaging public property. In some places it is considered vandalism (exception: you might get permission to trim away a dead branch). Find a forest or heavy wooded area. Be respectful of other people's rights. If you are in a fenced-in area, a lot or behind some one's home be careful. Do not trespass. Consider what may happen if you are reported. Get permission first. Some species of trees are protected.
- If taking wood from a live tree, try to collect only a dead branch, or one that is low enough to be a nuisance to persons walking nearby. Take from an area that could tolerate some thinning-- in fact, thinning even promotes growth of the saplings that are not collected. If possible leave a portion of the sapling with at least one branch with leaves.
-
Use a pocket saw to balded and cut around the limb.
-
Cut completely around the limb first. Cut through it as straight as possible.
-
Use a ratchet pruner if preferred which can cut diameters up to more than an inch.
-
Remove the bark completely, or leave the second layer. The second layer of most bark looks pretty nice on most trees. [4] X Research source
-
Shave off the bumps with a shaving plane if you removed the bark completely. This would be smart for a Handmade Bo staff (more comfort).
-
If you want to decorate it, do whatever you like. The tools for this will vary.
-
Seal it. Use oil base for Bo staffs and hiking sticks, this is your choice though. [5] X Research source Always wear gloves when applying oil based sealer; it will dry out your palms.
Advertisement
Community Q&A
Search
-
QuestionHow is rosewood for manufacturing a walking stick?Ashton GilmoreCommunity AnswerRosewood would result in a beautiful walking stick. However, rosewood is VERY expensive and difficult to find.
-
QuestionIs a crepe myrtle branch good for making a walking stick?Community AnswerYes. Let it dry a couple weeks, then leave the bark or shave it off. It's easy to sand the bark, and a clear sealer makes it really pretty. You can use nylon twine and whip a handle on the end.
-
QuestionWhat organic wood treatments are there?Community AnswerFor building a surface coating, shellac a decent choice. It's not waterproof but organic coatings won't be. Nut oils such as walnut can be used, but over time these can go rancid. Probably the best oil finish is mineral oil (look for butcher block finish). Beeswax or or carnuba wax or a blend would work, too. Wax and oils need to be periodically re-applied.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Reader Videos
Tips
- Woods to collect for walking stick making are Aspen, Maples, Willows, Basswood, Birch and many other deciduous tree limbs.Thanks
- Try a piece that goes up to your hip, shoulder, top of the head, or the armpit. This is a base of preference; some prefer the armpit.Thanks
- Wear protective gloves and hiking boots when cutting and collecting wood to prevent cuts and bites.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Never stick your hand in an old wood piles or brush before you poke the area with a stick a few times. Snakes, spiders, and other animals may live in the brush and piles. Keep your eyes open and check the area before you commit a part of your body to a potential hazard.Thanks
Advertisement
Things You'll Need
- Pocket knife with a saw blade; alternatively, ratchet pruner; maybe also anvil pruner to clip away some side branches
- Shaving plane, or alternatively coarse sandpaper or wire brush
- rubber gloves
- Measuring tape, or a tape measure.
References
- ↑ https://www.youtube.com/watch?v=7JeVVFOPqlM
- ↑ https://goneoutdoors.com/type-wood-strongest-walking-sticks-5059487.html
- ↑ http://backpackingmastery.com/skills/how-to-make-a-walking-stick.html
- ↑ https://boyslife.org/hobbies-projects/projects/1108/take-a-hike/
- ↑ https://www.bobvila.com/articles/how-to-waterproof-wood/
About This Article
Thanks to all authors for creating a page that has been read 237,570 times.
Advertisement