PDF download Download Article PDF download Download Article

Want a new look for old shoes? Try covering your shoes with an eye-catching fabric. This is a simple, affordable way to revamp tired shoes into fresh and pretty accessories. Covered shoes can make perfect costumes, or just add some flair to your wardrobe.

Part 1
Part 1 of 3:

Cutting the Fabric

PDF download Download Article
  1. Err on the side of too much fabric when you are cutting out your fabric. You can always trim later, or fold the extra fabric over the sides.
    • Measure the fabric by laying it over the top of the shoe, and marking the edges with tailor’s chalk.
    • Cut the fabric along the chalk lines.
  2. Place the fabric over the shoe, draw a mid-line with chalk, and then cut. This will allow you to fold the extra fabric inside the shoe, during glueing.
    • Cut flaps into the fabric that goes over the opening of the shoe, so that they can be folded inside.
    Advertisement
  3. Use the same method you used to cut patterns for the top and sides of the shoe. As before, lay the fabric around the shoe, and mark with chalk, before cutting with your fabric scissors.
    • If your shoe has a heel, cut a piece of fabric to wrap around the heel.
  4. Advertisement


Part 2
Part 2 of 3:

Applying the Fabric

PDF download Download Article
  1. Applying the glue carefully is important because an even coating of glue prevents lumps in the fabric. Use your fabric paint brush to apply the Mod Podge in a thin, even layer.
    • Make sure your fabric glue matches the kind of fabric you are using.
  2. Make sure to line up the fabric with your chalk marks. Pull the fabric taut so that it does not lump or buckle.
    • Act quickly so that the paint does not dry before you have applied the fabric.
    • Fold extra fabric around the edges of the shoes, and trim with scissors if necessary.
  3. This will create a smoother, more seamless edge than if you trimmed the fabric right up to the shoe opening. However, if the folded fabric will make the shoe uncomfortable to wear, then trim it. [1]
  4. Paint the glue before wrapping and trimming the fabric, just as you did for the top of the shoe. If your fabric has a pattern like stripes or houndstooth, make sure to line up the pattern so that it matches neatly where it joins at the heel.
    • For a smoother join at the heel, try folding your fabric inward before you glue it down. [2]
  5. Now that you have done it once, the second shoe will be easier. Doing one shoe at a time makes sure to give you the time to carefully wrap and trim each piece of fabric before the glue sets.
  6. Advertisement
Part 3
Part 3 of 3:

Finishing Your Fabulous Shoes

PDF download Download Article
  1. This will make your shoes look clean and professional. You can erase the chalk by rubbing it with your hand.
  2. Make sure not to jostle your shoes while they are drying. They will be worth the wait.
  3. After all your hard work, they are looking fabulous and ready to wear. Go show them off.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Choose your fabric carefully. Thinner fabric will be easier to work with. [3]
      • If your shoe is made of faux leather, rub it with sandpaper before applying glue, to make sure it has enough grit for the fabric to stick.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You’ll Need

      • Old shoes
      • Fabric
      • Fabric glue or Mod Podge
      • Craft paint brush
      • Fabric scissors
      • Tailor’s chalk

      About This Article

      Thanks to all authors for creating a page that has been read 35,379 times.

      Reader Success Stories

      • Marg Hinchey

        Jan 3, 2021

        "I am prepareing to create early 19th century shoes for a masquerade event and this article has given me a great ..." more
      Share your story

      Did this article help you?

      Advertisement