How to Cut Chains

PDF download Download Article
PDF download Download Article

There are a variety of reasons you may need to cut a chain. Many people need to cut chains when they have lost the key to a lock or they need a chain to be a specific length. It may be that you just need to cut a necklace chain to shorten a necklace that is too long. Whatever the reason and the type of chain you have, with the right tools and technique, you can make short work of cutting through a chain.

Method 1
Method 1 of 3:

Cutting Chain With Bolt Cutters

PDF download Download Article
  1. [1] Bolt cutters come in a variety of sizes. Find a pair that is big enough so that the chain you want to cut will fit between the cutting blades when the cutters are in the open position.
    • If you have a large pair of bolt cutters, such as a 24 inches (61 cm) pair, they should be big enough to cut most common chains. [2]
  2. If you need to cut a chain to a specific length, you should measure the chain and mark the link that you want to cut. Remember, the link you cut will be destroyed, so you should mark the link past the length that you need.
    • It may be helpful to put a mark on the link with a marker, just so you don't lose sight of which one to cut.
    Advertisement
  3. You should try to put the link as far back between the cutting blades as possible. However, if you are cutting a large chain, you only want to put one side of the link between the blades at one time. [3]
    • Position the cutters so that you are cutting through the long side of the link. This will make it easier to position the cutters in place.
    • Putting the link towards the back of the cutters will give you more leverage when cutting through it.
  4. In order for the chain to break apart, you will need to cut a link on both sides. If you were to cut just one side, the link would be weakened but would not fall apart. [4]
    • If your chain is large, you may need to cut one side of the link at a time.
    • If you have a small chain, you can cut both sides of the chain at once.
    5. Advertisement
Method 2
Method 2 of 3:

Using a Saw to Cut Chain

PDF download Download Article
  1. If you don’t have bolt cutters or you have a hardened metal chain that bolt cutters won’t cut through, you can use a saw instead. There are a wide variety of saws that will effectively cut through a chain. Saws that are commonly used to cut chain can be manual or powered and include: [5]
    • Hacksaw
    • Metal grinder, such as an angle grinder .
    • Reciprocating saw
    • Coping saw
  2. If you are cutting the chain to a specific length, measure the chain and mark the specific link that needs to be cut. Be aware that the link you cut will be destroyed, so the link you want to cut should be the one right after your desired length.
    • Put a mark with a marker on the link you want to cut so that you can keep track of it as you go through the process of setting up your cut.
  3. It’s important to make sure that the chain link you are cutting won’t move while you are cutting through it. To accomplish this, put the chain in a vice or secure it to a solid surface with clamps. However you secure it, make sure the link you need to cut is in a position that allows you to cut it. [6]
    • If the chain is attached to something, such as if it is held together with a lock, find a link to cut that can be steadied either with your hands or against what it is attached to. However, be aware that it is hard to saw through a chain by just holding it your hands while sawing.
  4. Position the blade across the link and begin sawing, either by turning on your power tool or by moving your manual saw across the metal. Keep sawing until both sides of the link are cut in two. [7]
    • If you are using a manual saw, take your time and adjust your position if necessary. It can take a lot of energy to cut through a large chain.
    • Once you have cut through the link, it will be unusable. It should be easy to pull out of the remaining solid chain pieces.
    5. Advertisement
Method 3
Method 3 of 3:

Cutting Small Jewelry Chain

PDF download Download Article
  1. To cut small chains, such as necklace chains, you need small pliers that can cut through metal. These are often called “nippers,” or wire cutters. Small pliers such as this can be found at any home improvement or craft supply store.
    • If you are just cutting chain one time, use whatever small pliers you have. If you plan on cutting a lot of chain, you may want to purchase small jeweler’s pliers, which are made to cut chain. [8]
  2. Put the link inside the very tip of the pliers. Be sure to position the link so that the pliers will only cut one link.
    • It won’t take a lot of pressure to cut through very small chain, so you don’t have to position it in the very back of the cutting area like you do with large chain. [9]
  3. Squeeze the pliers until the link is cut in half. With a small chain, this shouldn’t take much pressure. In many cases, the cut link pieces will fall out of the rest of the chain immediately after being cut. [10]
    • In some cases you will need to use small-nosed pliers to pull out the pieces of chain that you cut from the ends of the chain.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What if the chain is too thick to cut with these things?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    If the chain is too thick, you can use a grinder with a metal blade on the end of it to grind through the chain.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 11
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      Cutting Chain With Bolt Cutters

      • Chain
      • Bolt cutters

      Using a Saw to Cut Chain

      • Chain
      • Saw
      • Clamp or Vise

      Cutting Small Jewelry Chain

      • Chain
      • Small cutting pliers
      • Small-nosed pliers, if necessary

      Other wikiHows

      How to
      Get Effects on Snapchat
      How to
      Relieve & Prevent Headaches & Migraines Fast
      How to
      Quickly and Easily Unclog a Toilet
      How to
      Use Uber for the First Time: Complete Beginner's Guide
      How to
      Take a Screenshot on a Windows PC: 8 Simple Tricks
      A Complete Guide to French Braiding Hair
      How to
      Play Poker
      How to
      Take Care of Potted Orchids
      How to
      Make a Piñata
      How to
      Make Guacamole
      How to
      Meditate
      How to
      Surf
      Advertisement

      References

      1. ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 24 February 2021.
      2. ↑ https://www.familyhandyman.com/home-security/how-to-stop-thieves/view-all/
      3. ↑ https://www.wonkeedonkeetools.co.uk/bolt-cutters/how-to-cut-a-metal-chain-with-bolt-cutters/
      4. ↑ https://www.wonkeedonkeetools.co.uk/bolt-cutters/how-to-cut-a-metal-chain-with-bolt-cutters/
      5. ↑ https://www.popularmechanics.com/home/how-to/a1804/4218587/
      6. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/view-all/
      7. ↑ https://www.wonkeedonkeetools.co.uk/bolt-cutters/how-to-cut-a-metal-chain-with-bolt-cutters/
      8. ↑ https://www.firemountaingems.com/resources/encyclobeadia/charts/f40p
      9. ↑ https://www.leaf.tv/articles/how-to-shorten-a-necklace/
      1. ↑ https://www.leaf.tv/articles/how-to-shorten-a-necklace/

      About This Article

      Article Summary X

      If you need to cut through a chain because you’ve lost a key or need to make a chain a specific length, you can do so using bolt cutters. Find bolt cutters that are large enough to fit around the chain you need to cut. Position the link as far back into the cutters as possible, then cut the link on both sides. If you don’t have bolt cutters, use a hacksaw, angle grinder, or reciprocating saw instead. Secure the chain in a clamp or vise, then saw through 1 link. Keep sawing until both sides of the link are cut in two. To learn how to cut small jewelry chain, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 139,270 times.

      Did this article help you?

      Advertisement