PDF download Download Article
Cleaning your stuff after an unfortunate bathroom mishap
PDF download Download Article

We’ve all been there. You’re not paying attention while in the bathroom and suddenly you hear a splash—one of your belongings just took a dive into the commode. At first, you might be tempted to just flush it and move on with your life, rather than being forced to stick your hand into the ice cold, icky depths of a toilet filled with who-knows-what. But there’s no need to despair. Once you get past the hard part of retrieving an item that took an accidental swim, it’s actually quite easy to sanitize most things so that they’re safe to handle again.

Things You Should Know

  • Wear rubber or nitrile gloves to retrieve the item, then rinse it under the tap if it isn't electronic. Thoroughly wash your hands with soap and warm water.
  • Spray the item with disinfecting spray or a sanitizing wipe, washing all its exposed parts.
  • Saturate a cotton ball with rubbing alcohol, and use it to wipe down the item. Or, boil sturdier, waterproof items in a pot.
Method 1
Method 1 of 4:

Retrieving and Rinsing the Lost Item

PDF download Download Article
  1. If you’re lucky enough to drop something into a toilet in your own home, be prepared and have some rubber gloves on hand. Pulling these on before you stick your hand into germ-filled toilet water will make the task a lot more bearable. If you’re out somewhere and don’t have the benefit of gloves, you’ll have to decide whether it’s worth taking the plunge. [1]
    • Don’t flush anything that’s too big to fit through the pipes of the toilet. Then you’ll just have an additional mess to deal with.
    • Assuming gloves are not an option, think on your feet and use some other object, such as a wad of paper towels or a plastic bag turned inside out, to protect your hand from the worst of the mess while you go after the dropped item.
    • If you just can’t stand the notion of getting your hands dirty, certain objects, like jewelry or house keys, may be retrievable using a coat hanger that’s been bent into a hook.
  2. Whether you’re wearing protective gloves or not, try to minimize the amount of time your hand spends in the toilet. In one quick motion, reach into the bowl, grab the item and pull it out, letting excess water drip into the bowl. Toilets are breeding grounds for all sorts of bacteria and viruses, so the less you’re able to expose yourself, the better.
    • Take a firm grip on the object so that you don’t drop it. If it slides further down the drain opening, you might never get it back.
    Advertisement
  3. Assuming the thing you dropped wasn’t your smartphone or the remote control, you’ll want to rinse off as much of the water from the toilet as you can. Turn the sink on as hot as it will go. If soap is available, lather the item up to start superficially cleaning it right away. Run the item under the hot water, turning it over so that the stream bathes every part of it.
    • Electronics and objects that are easily damaged by water should be dealt with by other means.
    • A strong antibacterial soap and hot water may be all you need to disinfect items that have fallen into a clean toilet, but you may still feel better employing other methods.
  4. Before deep-cleaning the object, take a few minutes to wash your hands with soap and warm water. After all, they’ve just been inside the potty. If you were lucky enough to have latex gloves or dish gloves nearby, peel them off and throw them in the garbage before washing up. [2]
    • Be sure to scrub between your fingers and beneath your fingernails, where bacteria is good at hiding. [3]
    • It’s probably also a good idea to wipe down anything that the toilet water or salvaged item has touched with a disinfectant.
  5. Advertisement
Method 2
Method 2 of 4:

Cleaning With Disinfectant Products

PDF download Download Article
  1. Buy a potent chemical disinfectant to kill whatever bacteria might be clinging to the dirty item. If the item has a smooth, solid surface, scrub it down with a disinfectant wipe. If the item is porous or has a lot of irregular angles or protrusions, spritz it with a cleaning spray to ensure that the disinfectant is distributed over its entire surface area. [4]
    • Products like Lysol Disinfectant Foam Cleaner, Clorox Disinfecting Bathroom Spray and Scrubbing Bubbles Super Concentrated Bathroom Cleaner can be found in most stores and will get the job done without the risk of any damage to your belongings. [5]
    • Disinfecting wipes can be used to clean anything from toys to jewelry to sunglasses. Sprays will do a better job of cleaning things like hair brushes and non-machine-washable clothing items.
    • Try to find a disinfectant that doesn’t use bleach as an active ingredient. Bleach can discolor and even eat through some materials.
  2. While applying the disinfectant, make sure that you’re covering as much of the retrieved item as you can. Bacteria can linger in hard-to-access nooks and grooves, and if not eliminated entirely could continue to reproduce and possibly make you sick. Don’t take any chances. Go over the item as many times as you need to to make sure it’s been properly sanitized. [6]
    • Stay away from electronics with wet sprays and soggy wipes. These items are best restored using a small amount of rubbing alcohol.
    • The fumes from disinfectant cleaners can be overpowering. Always handle them in an open, well-ventilated area. Point the nozzle or hold the wipe away from your face as you work.
  3. Don’t rinse or towel off the item right away after you’ve treated it with disinfectant. Instead, set it aside and allow it to sit for a few minutes. The disinfectant will continue working on the bacteria resting on the surface. Afterwards, wipe the item down with a dry towel, being sure to remove all traces of the disinfectant chemicals. [7]
    • Rinse and dry the item once more after applying a disinfectant to make sure that it’s completely clean.
  4. Advertisement
Method 3
Method 3 of 4:

Sanitizing Sensitive Items With Rubbing Alcohol

PDF download Download Article
  1. Run down to your local pharmacy or supermarket and pick up a bottle of isopropyl alcohol and a package of cotton balls. Isopropyl alcohol, also known as a rubbing alcohol, is a great way to sterilize objects like cell phones, remote controls and other electronics that you can’t afford to get wet (or wetter). [8]
    • Choose an alcohol with a 70% concentration that is free of additives or fragrances.
    • A small bottle of rubbing alcohol only costs a few dollars, but is useful for innumerable cleaning tasks.
  2. Remove the cap from the bottle of rubbing alcohol. Take a cotton ball and dip it into the alcohol, letting it soak into the fibers throughout. Shake the cotton ball a couple times to remove excess alcohol, then press it firmly against a clean cloth or the palm of your hand. [9]
    • You don’t want the cotton ball to be too wet, or alcohol could leak out and find its way into the sensitive openings of a phone, watch or pair of earbuds.
    • This method of sterilization has long been used in medicine and is proven to be effective. [10]
  3. Use the alcohol-soaked cotton ball to swab whatever it was that was claimed by the latrine. Disinfecting with a damp cotton ball makes it possible to eradicate bacteria from the outer surface of the item without the risk of exposing delicate parts to any more unnecessary moisture. After you’re finished, pat the item with a clean towel to wick up any standing alcohol residue and let it air dry. [11]
    • Rubbing alcohol evaporates very quickly and doesn’t form a residue.
  4. Advertisement
Method 4
Method 4 of 4:

Boiling Sturdy Items

PDF download Download Article
  1. Run some water into a spacious pot or saucepan (depending on the size of the item you’re trying to sanitize). Place the pot over medium-high heat until the surface of the water just begins to bubble. The heat from the boiling water will instantly destroy microbial bugs on durable, hard-to-clean items. [12]
    • Boiling is a good way to thoroughly disinfect solid, one-piece objects that aren’t easily broken, such as toothbrushes, combs, drinking containers and just about anything made out of plastic or glass.
  2. Using a pair of tongs or a strainer, lower the tainted object into the boiling water. The item will need to stay immersed for 1-20 minutes, depending on the size and material—any longer and it may be in danger of being warped by the heat. Whisk the item through the water to flush away bacteria concentrated on the surface.
    • Make sure you have a way of protecting your hands from the heat. Consider taking the precaution of wearing a pair of dish gloves or oven mitts, even if you’re using tongs.
    • Leaving plastic and fragile metal items submerged in boiling water for too long could cause them to melt.
  3. Pull the infected item out of the pot and give it a shake to remove excess water. Wrap the item in a clean, dry towel, then leave it out to air dry. Once the remaining moisture has evaporated, it should be as good as new.
    • If the item has a lid or cover, leave it off to allow airflow and prevent mildew from forming inside.
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Does disinfecting a surface damage it?
    Chris Willatt
    House Cleaning Professional
    Chris Willatt is a House Cleaning Professional based in Denver, Colorado. Chris is the owner of Alpine Maids, a cleaning agency that he founded in 2015. Chris is on a mission to elevate what it means to be a cleaning professional and has built up Alpine Maids with that goal in mind. Chris has been featured in USA Today, Forbes, and Readers Digest. Alpine Maids received Angie's List Super Service Award for three years in a row from 2016-2018. They were also awarded Colorado's "Top Rated Local House Cleaning" Award in 2018 and were featured on the Inc. 5000 Company List.
    House Cleaning Professional
    Expert Answer
    It depends on what kind of disinfectant you're using. If you have something with bleach or chlorine in it, it's going to cause a strong oxidation reaction. That's going to be toxic, and it may damage the surface depending on what you're using it on. That's one of the main reasons cleaning companies don't use them very often.
  • Question
    Do sanitizers and disinfectants kill all germs?
    Ashley Matuska
    Professional Cleaner
    Ashley Matuska is a Professional Cleaner at the Founder and Owner of Dashing Maids in Denver, Colorado. Ashley has over seven years of experience in the cleaning industry. She and her team specialize in offering sustainable deep cleaning and maintenance cleaning services. She received a BS in Biology and Sociology from Indiana University.
    Professional Cleaner
    Expert Answer
    No. Cleaning solutions might eliminate 99.9% of all germs when used properly, but only when they're applied to a clean, flat, nonporous surface. Mae sure you always read the fine print to know what the cleaner is effective against and what it isn't.
Ask a Question
      Advertisement

      Tips

      • Watch your belongings around open toilets. It’s always better if you can prevent the issue altogether.
      • Turn off the water to the toilet to prevent the item from getting flushed or sucked deeper into the pipes accidentally.
      • Wear gloves or other means of protection if you have an open cut or sore on your hands.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Avoid putting anything in or near your mouth if it has fallen into the toilet, or been treated with potentially-toxic disinfecting chemicals.
      • When handling objects that have come into contact with human waste, there is always a chance of contracting E. coli, salmonella, hepatitis and other infections. Wash your hands as often as possible throughout the disinfecting process, before, during and after.
      Advertisement

      Things You'll Need

      • Rubber gloves
      • Water for rinsing
      • Antibacterial soap
      • Disinfecting spray or wipes
      • Rubbing alcohol
      • Cotton balls
      • Boiling water
      • Tongs or strainer
      • Dry towels

      About This Article

      Article Summary X

      To disinfect something you dropped into an unflushed toilet, try using a disinfectant spray or wipe. If the item has flat surfaces, wipe down all of them. For items that are harder to wipe, cover them with the disinfectant spray. However you apply the disinfectant, let it sit for a minute or 2 before rinsing it off, which will give it time to kill off any bacteria. If you dropped a sensitive electronic item, like your phone or a remote control, use rubbing alcohol and cotton wool balls. Soak a ball in the rubbing alcohol, then use it to wipe down the surface of your item. This way, you’ll prevent the electronics from being exposed to any additional unnecessary fluids. For tips on how to disinfect sturdy items by boiling them, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 197,021 times.

      Reader Success Stories

      • Anonymous

        Mar 4, 2018

        "Helped me with disinfecting glasses that were retrieved from the toilet."
      Share your story

      Did this article help you?

      Advertisement