Download Article Download Article

Wet sand, whether for a sandbox or your pet's terrarium, can be a pain. For one thing, it can breed germs that put your loved ones at risk. Drying out sand typically requires a heat source and time. You can use the sun, your oven, or if you're using sand for industrial purposes, a cement mixer and a torch. Either of the first 2 methods will also work for drying out sand you bring home from the beach and want to use for crafting purposes.

Method 1
Method 1 of 3:

Drying Sand in the Sun

Download Article
  1. This is the easiest way to dry the sand, whether you have a sandbox or a bucket of sand for a terrarium. Pick a hot, sunny day and set the container in direct sunlight. Make sure to leave the lid off the container. [1]
    • If you need it to dry quicker, pour the sand out on a large blanket and spread the sand out evenly. Set that in the sun. Weight the edges down with rocks so it doesn't blow away.
  2. The sand on the bottom will take a lot longer to dry than the sand on the top. If you stir it up every so often, the drying will go much faster. [2]
    • The sand may take several hours to dry, depending on how hot the day is and how wet the sand is.
    Advertisement
  3. Continue checking on the sand to see how dry it is. Also, watch the weather, as you don't want it to get rained on! When it's dry, you can put it back where it belongs. [3]
  4. Advertisement


Method 2
Method 2 of 3:

Heating Sand in the Oven

Download Article
  1. Turn the oven on to get it heating for your sand. You don't want to go too hot, as you want to steam off the water slowly.
  2. Choose a disposable baking dish or cover a large baking tray with foil to protect it. Spread the sand out as thin as you can, using more than one dish if you need to. [4]
    • Disposable is best as you don't want to reuse the dish for cooking after using it for sand. You could also make a dedicated tray for cleaning and heating sand.
  3. Set the trays in the oven for 30 minutes, stirring the sand halfway through. Check the sand after 30 minutes to see if it's dry. If it's not, stir it and put it back in the oven for 15-minute intervals until it's dry. [5]
    • Alternatively, place the sand outside in the sun on a hot day. You'll still need to stir it every so often.
  4. Advertisement
Method 3
Method 3 of 3:

Using a Cement Mixer to Dry Sand

Download Article
  1. Pour the sand into the mixer with a wheelbarrow or bucket underneath to catch any sand that falls out. You can also tip the opening up so it doesn't fall out. [6]
    • This works for things like sand for putting greens or sandblasting.
  2. A propane torch works best if you aim the cement mixer so sand pours out, and the torch heats it as it falls. Aim the torch along the bottom edge of the mixer with part of the flame going inside. [7] For other heat sources, you can aim them directly into the mixer and let them heat the sand as it tumbles. Make sure to leave about 1 foot (0.30 m) or so of space between the 2 to allow room to vent. [8]
    • For instance, you can use an industrial propane heater for this purpose. You can buy propane heaters and torches at hardware stores.
  3. The mixer will help stir up the sand so that it gets airflow in it and dries out more quickly. Let the mixer go until the sand is completely dry, which will depend on how much you have and how wet it is. [9]
    • This will likely go faster with a torch, as it heats the sand as it pours out.
    • With a heater, it may take 30 minutes or more. You can turn the heater off after about 20 minutes to let it continue to steam the water off. [10]
  4. Once the sand isn't steaming anymore, use a shovel to scoop some out and test the dryness. If it pours easily, it's likely dry enough for whatever project you need to use it for. [11]
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Place a tarp with holes in the bottom of sandboxes to drain water. If your sandbox has wood barriers around the edges with your lawn for the base, line it with a tarp. Make sure to punch 0.25 in (0.64 cm) holes in the tarp along the bottom so the water can drain out. Put a hole every 0.5 feet (0.15 m) or so. If you have a standard plastic sandbox, just drill or cut holes in the bottom to let the water drain out. [12]
      • Get a waterproof cover for your sandbox if yours doesn't have one and make sure to keep it covered at all times when your child isn't playing in it. Even a tarp will suffice as a cover. That will help keep the sand from getting wet. [13]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Only work with industrial cement mixers and other tools if you know what you're doing. They can be dangerous if you don't know how to use them. For instance, you can easily burn yourself on a propane heater or torch if you aren't careful!
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about aquariums and aquascaping, check out our in-depth interview with Joe Perez .

      About This Article

      Thanks to all authors for creating a page that has been read 90,341 times.

      Did this article help you?

      Advertisement