How to Dye Running Shoes

PDF download Download Article
PDF download Download Article

Running shoes often endure heavy wear and tear over the course of their use and can end up looking dull or worn. Adding some dye to an old pair of running shoes, or just some shoes that you want to change, can make them look brand new and fresh. If you’re looking for a fun and easy DIY project, try dyeing your running shoes!

Part 1
Part 1 of 4:

Preparing the Materials

PDF download Download Article
  1. Most shoe materials can be dyed using an all-purpose dye. You can purchase all-purpose dye at a craft store or an online retailer.
  2. Make sure your shoes are suitable for the dyeing process by testing a small patch before dyeing the entire shoe. If the test dye sets then you should be able to successfully dye your running shoes. If it doesn't you might want to try a different dye.
    • Keep in mind that many shoes have been treated with a surface finish during the manufacturing process making it difficult for the shoe to absorb a new dye. [1] If your test dye doesn’t set it might have a surface finish on it.
    Advertisement
  3. Find a clear area where you can set up your materials. Cover this area with a plastic drop cloth or several layers of newspaper to avoid any leakages. Wear rubber gloves when handling the dye to avoid staining your hands and be sure to wear clothes that you can get dirty in. [2]
  4. Be sure to remove your shoelaces if you don’t want them to be dyed along with your shoes. [3] Simply unlace both laces and set them aside until the dyeing process is finished.
    • If you decide that you want your shoelaces to be dyed remove them from your shoes and add them in the dye mixture on their own to ensure an even dye.
  5. If it's possible, remove the insoles of your shoes to avoid dyeing them. Reach into your shoe, pull out the insole and set it aside.
    • If you have removable insoles its best to exclude them from the dying process as they could become misshapen.
  6. If you don’t want the soles of your shoes to be dyed, cover them with rubber cement or a layer of vaseline. These can be washed or peeled off after the dyeing process. [4]
  7. You want to make sure they are clean so that the dye spreads evenly. Use warm water with soap and a sponge to clear away all marks. [5]
    8. Advertisement
Part 2
Part 2 of 4:

Creating the Dyebath

PDF download Download Article
  1. This should be enough water to completely submerge your running shoes. Heat the water beforehand to approximately 140 °F (60 °C) over the stove in a large cooking pot. Fill the sink or bucket with the hot water.
    • Pour the water from the pot very carefully into the sink/bucket as not to splash yourself with hot water.
  2. Following the instructions on the dye packet, pour the dye into the hot water in the sink/bucket. Stir the dye into the water until it looks dissolved. Use an old mixing spoon to stir in the dye.
    • The dye can stain the vessel you are using during the dyeing process so be sure to use a bucket or sink that can get dirty. Also be advised that your mixing spoon will be dyed in the process so be sure to use a mixing spoon that you don’t mind getting dye on.
  3. Adding a small amount of dish detergent will help the dye spread evenly. Stir the detergent into the mixture slowly until it is well-mixed.
    • You can use any kind of dish detergent you use to wash dishes with.
    • Be sure to avoid making bubbles from stirring the detergent too fast.
    4. Advertisement
Part 3
Part 3 of 4:

Adding Your Shoes to the Dyebath

PDF download Download Article
  1. Make sure your shoes are already wet before putting them into the dye mixture. Briefly run your shoes under warm tap water to wet them. This will allow the dye to seep into your shoes more easily. [6]
    • Your shoes don’t need to be completely saturated with water at this point. You just want to make sure they are a little damp.
    • Be sure to wet the entire shoe, even the inside, so that the dye fully absorbs into the shoe.
  2. Using your gloved hands, put the shoes into the dye one at a time. Avoid dropping the shoes into the dyebath hastily as this could cause the dye to splash.
    • The temperature of the dyebath is hot! Be cautious when lowering your shoes into the mixture as to not burn yourself.
  3. Let the shoes sit in the dye mixture for at least an hour to enable them to absorb the dye. Leave the shoes in the dye for as long as you want based on the level of color saturation you desire.
    • For example, if you are dyeing your shoes blue and you want them to have a rich, dark blue appearance you can leave them in the dyebath for a longer amount of time. If you wish to dye your shoes a lighter shade of blue leave them in the dyebath for a shorter amount of time.
    • Remember that you can always check the color saturation of your shoes during the dyeing process by carefully pulling them out and holding them over the the dyebath to judge. If you decide you want your shoes to be darker, slip them back into the dyebath.
    4. Advertisement
Part 4
Part 4 of 4:

Cleaning Up Your Dyed Running Shoes

PDF download Download Article
  1. After removing your shoes from the dye run them under cool tap water until the water begins to run clear. You want to make sure that any leftover dye is washed out from your shoes. [7]
  2. There shouldn’t be any traces of dye on the paper towel. Your shoes will still be a bit damp but they shouldn’t be dripping wet.
    • Avoid leaving your shoes dripping wet as any leftover dye can stain.
  3. Take off the liquid cement or vaseline from the soles. If you used liquid cement you should be able to peel it off of the soles. If you used vaseline, take a wet paper towel and some soap and scrub off the leftover vaseline contents.
  4. Finish the process by washing the shoes with warm water and soap or put them in the washing machine with a mild detergent. Washing your shoes ensures that the dye fully sets into the fabric.
  5. You can allow your shoes to air dry or you can put them in the dryer. Keep in mind that drying your shoes in the dryer can cause them to shrink. If you dyed your shoelaces leave them out to air dry. Allow your shoes to dry completely before wearing them.
    • If you have a hairdryer handy you can use it to dry the insides of your shoes or any other hard to dry places.
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • The best shoes for dyeing are generally lightly colored, in white, gray or soft colored tones that can be easily dyed. Black shoes will have a harder time absorbing the dye so it is best to dye shoes that are more susceptible to color absorption.
        Thanks
        Helpful 0 Not Helpful 0
      • Dye your running shoes a color that you’ll enjoy sporting often. You can decide to coordinate your shoes with a particular color scheme that you regularly wear. Your running shoes are an expression of yourself so be sure to pick a color that you’ll like wearing.
        Thanks
        Helpful 0 Not Helpful 1
      • Keep in mind that your shoes might not come out the way you intend them to and that this is an experiment. If you have a pair of shoes that you don’t mind dyeing you might want to do a test run on them before embarking on the real project.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Pair of running shoes
      • All purpose dye
      • Sink or bucket
      • Rubber gloves
      • Paper towels
      • Plastic drop cloth
      • Newspaper
      • Water
      • Stove
      • Large pot
      • Old mixing spoon

      You Might Also Like

      How to
      Become Better at Running: Training, Treadmill Tips & More
      The Best Way to Lock Your Child's iPhone Remotely
      How to
      Exercise Your Shin Muscles
      11 Easy and Comfortable Ways to Carry a Phone While Running
      How to
      Run a Faster 800m
      How to
      Start Running
      How to
      Improve Your 1500M Run Time
      How to
      Clean Muddy Running Shoes
      How to
      Begin Running
      How to
      Run
      How Can I Safely Listen to Music While Running?
      Are My Running Shoes Worn Out? 11 Ways to Tell
      How to
      Remove the Smell of Cat Urine from Running Shoes
      How to
      Go Running when You Have a Cough
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about caring for shoes, check out our in-depth interview with Carroll Kelly .

      References

      1. ↑ http://thedreamstress.com/2011/06/tutorial-how-to-dye-fabric-shoes/
      2. ↑ https://www.craftsy.com/sewing/article/dyeing-clothes/
      3. ↑ https://oureverydaylife.com/how-to-dye-nike-shoes-12459464.html
      4. ↑ http://myfrugaladventures.com/2013/07/diy-tie-dye-childrens-shoes/
      5. ↑ https://www.thecountrychiccottage.net/dye-toms-shoes/
      6. ↑ http://www.theshoesnobblog.com/2017/05/a-guide-to-dyeing-your-own-shoes.html
      7. ↑ https://www.madeeveryday.com/tutorial-easy-fabric-dyeing/

      About This Article

      Thanks to all authors for creating a page that has been read 45,583 times.

      Did this article help you?

      Advertisement