How to Dye Vinyl

Co-authored by Mark Weiser

Last Updated: December 19, 2024 References

If you want to revive a tired old chair, bar stool, or the interior of a car, dying vinyl is a straightforward DIY project. Vinyl is dyed with spray paint, so the job is more like painting furniture than dying fabric. ^{[1]
X
Research source} It takes time and care, but dying your vinyl upholstery or interior is something you can easily do at home.

Part 1

Part 1 of 4:

Getting the Equipment

Download Article

1
Choose a spray paint that sticks to plastic and includes primer. Vinyl is a type of plastic, so you need a paint brand that sticks to vinyl to avoid chips and cracks. You should also check that the paint has primer in it so you don’t need to spray primer on separately. ^{[2]
X
Research source}
- There are also spray paint brands designed specifically for fabrics like vinyl. This will leave your vinyl upholstery more flexible, but it’s also more expensive. This is a nice option if you can afford it, but a plastic-adhering brand will work fine. ^{[3]
  X
  Research source}
This product is designed specifically for vinyl in a car. It’s applied before the paint itself to soften the vinyl and keep it clean. ^{[4]
X
Research source} You can buy it at a hardware store or a car detailing shop.

Advertisement
For any spray-painting project, wearing a respirator is the best way to be sure that you won’t breathe in paint fumes. They’re not too expensive and you can get one at a hardware store. ^{[5]
X
Research source}

Part 2

Part 2 of 4:

Setting Up Your Work Area

Download Article

Even if you’re wearing a respirator, you don’t want to fill your home with paint fumes, so find a well-ventilated spot. Outside is best, but the garage also works. ^{[6]
X
Research source}
2
Cover the floor of your workspace. Spray paint gets everywhere, especially if you don’t have much experience with it. Cover at least 5 feet (1.5 m) on each side of your project to cut down on the mess.
- Newspaper or garbage bags will work, but a drop cloth is the most effective tool for covering your work surface. ^{[7]
  X
  Research source}
3
Mask the parts you don’t want to dye with painter’s tape or plastic. If you want to leave part of the surface the original color, you can cover it with painter’s tape, or wrap a plastic bag around the area. ^{[8]
X
Research source}
- If you don't have painter's tape, masking tape will work in a pinch. ^{[9]
  X
  Research source}
- To prevent getting paint on the legs of a vinyl chair, wrap them in a plastic bag, and tape around the seat of the chair. This is much faster than wrapping each leg in tape. ^{[10]
  X
  Research source}
- You can also use tape to create stripes. Put evenly spaced, parallel strips of tape on the surface so that when you paint, you’ll leave stripes in the original color.
- If you’re dying the vinyl interior of your car, you’ll have to take extra care to cover everything around the seat. Wrap these areas tightly in plastic and tape it down.

Part 3

Part 3 of 4:

Cleaning Your Vinyl

Download Article

1
Spray it with a grease remover. Before you can dye vinyl, you need to get rid of any dirt or stains. Any grease-cutting spray cleaner should be strong enough to clean vinyl. ^{[11]
X
Research source}
- You can also get soap specifically designed to clean vinyl. ^{[12]
  X
  Research source} This is a better option for a particularly big job, or if you have multiple vinyl-dying projects in mind.
These pads are perfect for cleaning the irregular shapes on your vinyl interior. The abrasive surface can get right into the crevices and seams. ^{[13]
X
Research source}
Make sure to get all the cleaner or soap off. The cloth should be damp, not wet, so you don’t have to wait for the vinyl to dry. ^{[14]
X
Research source}

Part 4

Part 4 of 4:

Dying Your Vinyl Upholstery

Download Article

Not all spray paints are created equal. The instructions will tell you how far to stand from the object, how long to shake the can, how long to let the paint set, and so on. This takes only a couple of minutes and can save a lot of hassle. ^{[15]
X
Research source}
2
Test your spray paint on some plywood. Each brand of spray paint works a bit differently. It’s best to try it out ahead of time so you know how powerful and wide the stream is. ^{[16]
X
Research source}
- If you don’t have plywood, use paper or something else you can dispose of.
In your car, cover the area with a thin layer of vinyl prep spray, then wipe it off with a damp cloth. ^{[17]
X
Research source}
This step is easy to forget, but it’s crucial. Shaking makes sure the paint comes out evenly. ^{[18]
X
Research source} Again, the instructions on the can will tell you how long to shake it.
5
Sweep the spray paint across the surface to get a thin coat. Each layer of paint needs to be thin so that the paint won't crack. ^{[19]
X
Research source} To get a thin coat, sweep across the object, starting off to one side, passing across the object, and finishing off the other side. Go back and forth like this across the whole surface. ^{[20]
X
Research source}
- You'll get a more even coat if you sweep the paint across both horizontally and vertically. ^{[21]
  X
  Research source}
- Check the instructions to see how far to stand back while you're painting, but it will probably be about 6 to 8 inches (15 to 20 cm). ^{[22]
  X
  Research source}
- You can also try spraying the air above the surface and letting the paint fall onto the surface, rather than spraying the surface itself. This method can be messy and might require more space, but it’s highly effective to prevent pooling. ^{[23]
  X
  Research source}
- For the vinyl interior in your car, you might not be able to spray on either side of the area without getting paint all over your car. You can get creative by opening the doors and spraying from different angles, but the most important thing is to make sure the areas you’re not painting are well-covered with plastic.
Drying time depends on the paint and the thickness of the layer. Ideally, the drying will only take 5 to 10 minutes. ^{[24]
X
Research source} If not, check again 10 minutes later.
7
Add more coats until the surface appears evenly painted. Repeat the painting and drying process until the paint looks even across the whole surface. You'll probably need at least three coats, and maybe more. ^{[25]
X
Research source}
- Sometimes the paint will look even when it's wet, but inconsistencies show up when it's dry. You might need to add more coats later.
Even after paint looks dry, it takes time to cure (meaning to harden completely). The instructions on the can will tell you how long to let the paint cure, but it usually takes about 24 hours before you can sit dyed vinyl without ruining the paint job. ^{[26]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Especially if you’re going to do projects like this often, you might want to invest in a spray paint handle. Attaching this device to a spray can makes it easier to control. ^{[27]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
If you have one, put your vinyl furniture on a rotating surface, such as a Lazy Susan. Your project will be easier if you can simply rotate the item rather than picking it up or walking around it. ^{[28]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

Log in

How to Dye Vinyl

Steps

Getting the Equipment

Setting Up Your Work Area

Cleaning Your Vinyl

Dying Your Vinyl Upholstery

Expert Q&A

Tips

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories