Download Article
Download Article
If you realize that one of your tables is too small, you might think you need to make complicated alterations to it or get a new one altogether. Luckily, that’s not the case! Whether you need to fit more people at the table for a holiday or give yourself more space to work, there are a few really easy DIY tricks to extend any table. Either a plywood sheet or an extra folding table can make your table longer and wider so it can handle all of your needs.
Steps
-
Get a plywood board matching the dimensions you want the table to be. Determine how much more space you need for the table. Go to the hardware store and pick up a piece of plywood that matches the dimensions that you want your tabletop to be. In general, the table will remain stable if you get a board that's up to 24 in (61 cm) longer and 12 in (30 cm) wider than the tabletop. You can add less than that, but adding up to 12 in (30 cm) on each side of the table length and 6 in (15 cm) to each side of the width will be stable. [1] X Research source
- The hardware store can cut the wood to your dimensions.
- If your tabletop is 72 in (180 cm) x 36 in (91 cm) and you want to make it 10 in (25 cm) longer and 8 in (20 cm) wider, get a piece of plywood that’s 82 in (210 cm) x 44 in (110 cm).
- You could extend the table further if you have to, but you’ll have to add legs to the plywood to support it.
-
Cut the plywood to an oval shape if your table is round. You can still use this trick if your table is oval or circular. Lay the wood on a workbench or table. Use a jigsaw and cut the corners off the plywood to round out each side. Then sand the edges to smooth them out. [2] X Research source
- Always wear gloves and goggles while you're using a saw. If you're working inside, put a sheet or drop cloth down to catch any sawdust.
- You could try to find a rounded or oval piece of plywood instead of a rectangular one. This saves you the cutting.
Advertisement -
Clear your table. Take off the tablecloth, centerpieces, placemats, candles, and everything else so the tabletop is free. Also pull any chairs back so you have plenty of room to work. [3] X Research source
-
Lay a rug mat on the tabletop. Get a rug mat that matches the dimensions of the tabletop. Roll it out and center it on the table. This keeps the plywood in place and prevents it from slipping. [4] X Research source
- The rug mat also protects the original tabletop, so you don’t have to worry about damaging it.
-
Center the piece of plywood over the table. Lift the plywood and hover it over the table. Adjust it so it’s centered, then gently lower it onto the tabletop. Check around the plywood to make sure it’s even on all sides of the table. [5] X Research source
- You could do this alone but it’ll be a lot easier with a partner.
- Test the plywood to make sure it’s stable. Make sure it doesn’t slide from side to side and can handle plates and dishes on it without tipping.
- If the tabletop isn't stable, it might not be fully centered. Readjust it to see if that helps. If not, the plywood might be too large for the table, and you'll have to attach legs to the corners.
-
Put a tablecloth over the plywood to hide it. Just lay out your favorite tablecloth over the tabletop and adjust it so it’s even. No one will be able to tell that there’s a piece of plywood under there! [6] X Research source
- Some other decorations like a runner, candles, or centerpiece can also help hide the plywood underneath the tablecloth.
Advertisement
-
Get a folding table that matches the width and height of the main table. This is a good, simple fix to extend your table even more. All you need is a folding table. Measure the dimensions of the original tabletop and get a folding table that matches the height and width. [7] X Research source
- The length of the table is less important and it depends on the amount of space you need.
- If you can’t find a table that’s the right width, you could use the same plywood trick from part 1 to make it match the original table.
-
Use table risers if the two tables aren't the same height. Don't worry if you can't get a folding table that matches your table height. Just use table risers to raise it up to the right height. Pile risers under each leg of the folding table until it matches the original table height. [8] X Research source
-
Align the 2 tables so the tabletops are flush. Open the folding table and stand it next to the original table. Slide the folding table so the edges of both tables are even. [9] X Research source
- If you’re using table risers, prop up the folding table first and then align it with the original table.
-
Cover the tables with a long tablecloth. Roll out the cloth and adjust it so it sits evenly across both tables. No one will be able to tell that there are actually two tables under there! [10] X Research source
- If you don’t have a tablecloth that’s long enough, you can use more than one. This will look fine too.
Advertisement
Expert Q&A
Search
-
QuestionHow can I raise the height of a table?Gino Colucci is a Home Improvement Specialist and the Owner of Crackerjacks Handyman Services (not a licensed contractor) in Chandler, Arizona. Crackerjacks Handyman Services offers an effective cost-saving solution for commercial and residential repair and maintenance needs, specializing in smaller projects. Crackerjacks Handyman Services carries liability insurance and all technicians go through a background check.To raise the height of your table, start by acquiring wood blocks, leg extensions, or risers, either by purchasing them or crafting your own. Ensure you have screws that are long enough for the task. Next, turn the table upside down to access the legs and pre-drill the center of each leg as well as the desired extension locations. When preparing the extensions, use a drill bit slightly larger than the screw head to create recessed holes along the pre-drilled paths. Apply adhesive to the surfaces that will be joined together, then firmly attach the wood blocks or extensions to the table legs using the long screws. Finally, if desired, stain or paint the added pieces to match the existing table legs for a cohesive appearance. Following these steps will effectively raise the height of your table to better suit your needs.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You’ll Need
Adding a Plywood Tabletop
- Plywood board
- Rug mat
- Tablecloth
Pushing Tables Together
- Folding table
- Table risers (if needed)
- Tablecloth
Tips
- Putting other decorations on the table like a runner or centerpiece will help hide your extensions even more.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don’t pile anything too heavy on the edges of the plywood sheet. It isn’t actually attached to the table and could tip over.Thanks
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about home and furniture care, check out our in-depth interview with Gino Colucci .
References
- ↑ https://www.bobvila.com/articles/space-planning-dining-room-thanksgiving/
- ↑ https://www.homestoriesatoz.com/tips-2/how-to-extend-a-table.html
- ↑ https://www.bobvila.com/articles/space-planning-dining-room-thanksgiving/
- ↑ https://youtu.be/KLotXpOFSww?t=43
- ↑ https://youtu.be/KLotXpOFSww?t=90
- ↑ https://www.bobvila.com/articles/space-planning-dining-room-thanksgiving/
- ↑ https://betweencarpools.com/how-to-seamlessly-extend-your-dining-room-table/
- ↑ https://betweencarpools.com/how-to-seamlessly-extend-your-dining-room-table/
- ↑ https://betweencarpools.com/how-to-seamlessly-extend-your-dining-room-table/
About This Article
Thanks to all authors for creating a page that has been read 36,698 times.
Reader Success Stories
- "Very helpful insights, and options that are doable."
Advertisement
"Very helpful insights, and options that are doable."
