PDF download Download Article PDF download Download Article

Planting trees can give most patches of earth some color and character. Although trees generally do not require a ton of maintenance aside from regular watering and intermittent pruning, they do benefit from the occasional application of fertilizer. To avoid damaging your tree, consider testing your soil first to determine what kind of fertilizer you need. Add an appropriate amount of fertilizer in the spring or fall to help your trees recover from damage and continue growing.

Part 1
Part 1 of 3:

Choosing When to Use Fertilizer

PDF download Download Article
  1. Poor growth is often an indicator that a tree isn’t getting the nutrients it needs and can benefit from a suitable fertilizer. Small, pale leaves and short branches are a few clear signs. Any tree that appears damaged or dying from harsh weather, insects, diseases, or chemicals can also benefit by using the nutrients in a fertilizer to repair itself and prevent future harm. [1]
    • Healthy trees often do not need extra nutrients. Adding fertilizer to good soil can put the nutrient ratio out of whack, causing your tree to overgrow and weaken the wood.
  2. Bring a tape measure as you check out the tree’s branches. Look closely at the branches and notice the little bud scars on them. They will look like rings or brown blemishes. These scars denote how much the tree has grown, and you can measure from scar to scar on a branch to see how your tree has grown over the years. [2]
    • If the rings are spaced out evenly, you probably won’t need to take precise measurements. However, you still may wish to do this to understand exactly how much your tree is growing.
    • A new tree will grow by approximately 9 to 12 in (23 to 30 cm) every year. An older tree will grow by about 4 to 6 in (10 to 15 cm) every year.
    • Depending on the species, your tree will reach maturity within 10 to 30 years. Expect the growth to slow down by then. [3]
    Advertisement
  3. Test the soil to discover any nutritional deficits in it. Locate the country extension office in your area. If you take a sample of the soil to them, they can give you a comprehensive analysis of what nutrients are missing in it. This test allows you to easily determine what kind of fertilizer you need. To get the proper balance of nutrients, always do this test before adding anything to the soil. [4]
    • You can also purchase a testing kit at most home improvement stores. Some of these tests may not be as detailed as an official test, but usually the results can help you figure out how to improve your soil.
    • Sometimes the soil’s pH is the problem. This isn’t fixed with fertilizer. Instead, increase the pH with garden lime and lower it with sulfur or aluminum sulphate. However, you should only adjust your soil if it's not in your tree's optimal pH range.
  4. Fertilizer applications need to be timed carefully to avoid damage to the tree. The ideal time is in fall, around October. Wait for the first frost to happen in your area, then apply the fertilizer before the ground freezes for winter. Early spring, around April and May, is also an appropriate time to add fertilizer. [5]
    • Fall is the ideal time because the tree is still active, so it will absorb nutrients and store them for spring growth.
    • If you add fertilizer too early, the tree will continue growing. You may notice new growth that dies in summer or winter, leaving damage on your tree.
  5. Advertisement
Part 2
Part 2 of 3:

Calculating How Much Fertilizer to Use

PDF download Download Article
  1. A simple way to determine how much fertilizer you need is by using the size of your tree. Use a tape measure to estimate your tree’s thickness. Note the measurement so you can use it in your calculations.
    • Make sure you measure the tree’s trunk at about chest height in order to get a safe estimate on how much fertilizer you need.
  2. Aim to give most trees no more than 1 lb (0.45 kg) of fertilizer per year. This will give you the general estimate of nitrogen you need for a 1,000 sq ft (93 m 2 ) growing space. If your tree is in a smaller yard, you should compensate by using less fertilizer. [6]
    • For example, a tree 3 in (7.6 cm) thick needs about 0.3 lb (0.14 kg) of fertilizer. 3 x 0.10 = 0.3.
    • Areas such as sidewalks, driveways, and buildings don’t count when determining the tree’s growing area. Trees near these structures will need less fertilizer overall.
    • Another way to estimate how much fertilizer you need is to multiply the tree’s age by 0.10.
  3. Making this last calculation is important in avoiding over-fertilization. The nitrogen content will be listed on your bag of fertilizer. You will see a number such as 30-3-3, which means the fertilizer is 30 parts nitrogen, 3 parts phosphorus, and 3 parts potassium. This means that there is 0.30 lb (0.14 kg) of nitrogen in 1 lb (0.45 kg) of your particular fertilizer.
    • For example, if you estimate you need 0.3 lb (0.14 kg) of nitrogen in a 30-10-10 fertilizer, you will need about 0.9 lb (0.41 kg) of fertilizer. 0.3 divided by 0.3 = 0.9.
  4. Advertisement
Part 3
Part 3 of 3:

Selecting and Applying Fertilizer

PDF download Download Article
  1. Fertilizer mixtures are plentiful, so selecting the right bag can feel a little intimidating. If you tested your soil, you will know exactly what you need. Typically, a fertilizer composed of 12 to 30 parts nitrogen is the best choice. Keep the potassium and phosphorus content low to avoid adding too much of these nutrients to the soil. [7]
    • Low nitrogen is the most common reason to add fertilizer. If your soil is low in nitrogen, you can get a fertilizer with little to no other nutrients. Look for something with 3 to 12 parts phosphorus and potassium, depending on the composition of your soil.
    • For nitrogen fertilizers, use a slow-release fertilizer. If your soil lacks phosphorus, potassium, calcium, or other nutrients, you can get liquid fertilizer and inject it directly into the soil.
    • General fertilizers for woody plants will have a nitrogen-phosphorus-potassium ratio of 8-1-1 or 15-5-5.
  2. Tree roots can spread a long way underground. To properly fertilize the tree, you need to distribute the fertilizer as far as the roots go. Start at the end of a branch on 1 side of the tree. Using a tape measure, measure all the way to tips of the furthest branches on the opposite end of the tree. [8]
    • This measurement is the diameter of the branch spread and will give you an idea of how far the tree’s roots have spread.
  3. Doing this is important if your soil is very compacted since the fertilizer won’t trickle down to the roots. Make holes about 1 in (2.5 cm) in diameter, 6 to 12 in (15 to 30 cm) deep, but space them 2 ft (0.61 m) apart. Dig these holes in concentric circles around the tree, creating more circles of holes as needed until you are beyond the tree’s branches. [9]
    • You can use a drill with an auger attachment to easily make the holes. The holes should reach about 1.5 times further than the reach of the branches.
    • Drilling holes can help any tree absorb nutrients from fertilizer. It can be particularly useful if you rake up the tree’s leaves or if there are grass and other competing plants above the roots.
    • Most of the roots will be no more than 18 in (46 cm) below the surface, so be careful. Also be aware of any utility lines under the soil so you avoid damaging them.
    • Avoid disturbing the root zone too much. Trees have both large, conspicuous roots and smaller roots in their root zone. Try as best as you can to avoid all of these roots.
  4. Multiply the diameter you measured by 1.5 to determine how far you need to distribute the fertilizer to cover the roots. Scatter your fertilizer over the area, then rake it smooth. You can safely spread the fertilizer up to 2 times further than the tree’s reach. [10]
    • If you dug holes to access the roots, fill the holes with the fertilizer.
  5. Compost such as pine bark adds calcium, potassium, and other important nutrients to the soil. It also insulates the soil and seals in moisture. Add a layer of compost no more than 3 4  in (1.9 cm) thick. Place it directly over the fertilizer and rake it flat. [11]
    • Compost is low in nitrogen, but it does add more potassium to the soil. Factor your fertilizer choice into the amount of compost you add.
  6. Water the fertilizer until the soil is thoroughly moist. The ideal way to water trees is to set a hose near the trunk. Turn on the water flow to a trickle and let it drip into the soil for 2 or 3 hours. The compost and fertilizer should be completely moist to eliminate any air holes. Try to add enough water to soak your soil 10 in (25 cm) in order to reach the roots. [12]
    • To test the soil, push a screwdriver or metal rod down into the soil. It should come out wet and dirty.
    • If you can’t use a hose, using a bucket or sprinklers can help.
  7. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Different fertilizers have different rates of application. Always read the entire label before you apply any fertilizer.
      • For the best results, test your soil often to stay on top of any problems. This will help you ensure your trees stay healthy.
      • Avoid applying fertilizer every year. Both newer and older trees don’t need it. Apply fertilizer every 2 to 3 years as needed to avoid over-fertilizing.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Providing too much fertilizer can be as dangerous as not providing enough! All of the tree’s energy will go into the leaves, leaving the roots short and weak.
      Advertisement

      Things You’ll Need

      • Measuring tape
      • Spade
      • Storage bottle
      • Rake
      • Fertilizer
      • Organic compost
      • Hose
      • Water

      About This Article

      Thanks to all authors for creating a page that has been read 36,028 times.

      Did this article help you?

      Advertisement