How to Fit Wind Deflectors

Last Updated: September 7, 2024 References

Wind deflectors allow you to open your car window during a stormy day without getting rain on your upholstery. They can also reduce the noise made when you roll your window down by deflecting the wind away from your window. Because wind deflectors are easy to install, fitting them to your car does not require a trip to the mechanic or any special tools. As long as you clean the channels beforehand and insert the deflectors carefully, they should fit comfortably in your window frame.

Part 1

Part 1 of 3:

Preparing the Window Frame and Deflectors

Download Article

1
Buy wind deflectors made for your car model. Wind deflectors are specially designed for different car models. Make sure that the wind deflectors you buy are suitable for your car. If you purchase the wrong kind, you will not be able to achieve a perfect fit.
- You can find the car model information on the wind deflector's packaging. If you're not sure what kind to buy, ask a salesperson for advice.
To fit the wind deflector in, you will need to roll your window at least halfway down. If your window does not roll down to the bottom, you can still fit your deflector in but may not be able to clean your window as thoroughly. ^{[1]
X
Research source}

Advertisement
3
Clean the window frame and channel. Spray a window cleaner or mild solvent over the tops and sides of the window and wipe it off with a paper towel or dry cloth. Rub off any dirt, dust, or debris in the window frame so your wind deflector will fit in securely. ^{[2]
X
Research source}
- If you are installing an adhesive wind deflector, clean off the window's trim (the painted door frame to the top and sides of the window) with the cleaner and dry cloth.
Pull your cloth through the slot and pick out any large pieces of debris that might be stuck in the slot. If you cannot pull out the debris using the cloth, pick it out with a screwdriver instead. ^{[3]
X
Research source}
If you install the deflector while the window frame is still wet, your deflector may not attach as tightly. Give the windows time to air dry or wipe the frame and slot down with a dry towel before you prepare your wind deflector. ^{[4]
X
Research source}

Part 2

Part 2 of 3:

Inserting In-Channel Deflectors

Download Article

Lift the deflector into the top corners of the channel first and push it into place. Press up on the middle and sides of the wind deflector to keep it securely fitted into the frame. ^{[5]
X
Research source}
2
Attach any window clips, if applicable. Some wind deflectors come with clips to adhere the wind deflector's edges in place. If your wind deflector comes with any clips, push them up between the deflector and the window to fasten it in place. ^{[6]
X
Research source}
- Your wind deflector's instructions should indicate where, specifically, to put the clips in.
3
Check the window for obstructions. After you have put the deflector in place, roll the window up to check that it still works properly. If your window cannot roll up, try adjusting the wind deflector to shift it out of the way. ^{[7]
X
Research source}
- This is especially important for electric windows, which may refuse to roll up if they sense an obstruction in the way.
- If you adjust the wind deflector, be careful not to force it in any position, as you may accidentally damage it.
Roll the window back up after you've finished adjusting its alignment and let it sit for at least 24 hours. This will give the wind deflector enough time to mold into the window so it will stay in place.
5
Use a maintenance spray on the window if it works slowly. If your wind deflector seems to slow your windows down, use maintenance spray around the window channels and slot to keep it from catching on the frame while rolling up or down. ^{[8]
X
Research source}
- You can purchase maintenance spray online or at most auto shops.

Part 3

Part 3 of 3:

Applying Adhesive Deflectors Instead

Download Article

1
Peel off a small section of the double-sided tape liner from both sides. Several inches or centimeters is enough to test the deflector's fit. Place the wind deflector along the top of the window trim to test its approximate fit. ^{[9]
X
Research source}
- Do not remove all of the double-sided tape until you've aligned the wind deflector.
2
Adjust the wind deflector's alignment. Line the wind deflector up with the top of the window trim as closely as possible. When you've achieved an even fit, apply pressure to the peeled ends of the adhesive to secure the wind deflector in place. ^{[10]
X
Research source}
- If the wind deflector does not align with the top of the window, it may be the wrong size.
Pull on the adhesive tape's end strips until you have entirely removed them from the wind deflector. Apply pressure to the wind deflector as you peel off the tape to stick it firmly on your car. ^{[11]
X
Research source}
After you've bonded the wind deflector to your car, try to wiggle the deflector up and down. If the deflector has adhered properly, it shouldn't move. Apply more pressure to loose areas or adjust the wind deflector's positioning if it does move.

Community Q&A

Search

Add New Question

Question

Does it damage the windows?

Community Answer

If you use the adhesive wind deflector, it will not damage the window as it is stuck on the outside. If you use the other kind, it might damage it a little.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 14

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Wear gloves while cleaning your car and handling the wind deflectors to avoid smudging as you work.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Paper towel
Microfiber cloth
Maintenance spray
Window clips (optional)

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

Log in

How to Fit Wind Deflectors

Steps

Preparing the Window Frame and Deflectors

Inserting In-Channel Deflectors

Applying Adhesive Deflectors Instead

Community Q&A

Tips

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories