PDF download Download Article
An easy-to-follow guide on hacking into a school computer or laptop
PDF download Download Article

This wikiHow article teaches you how to hack your school PC/Mac. In the event that your school uses Chromebook, you will not be able to hack into the computer unless you can load Windows on it, which involves taking it apart and would be very difficult to pull off without getting caught. Keep in mind that if your computer's BIOS is locked down, you will not be able to hack your school's computer. You will not also be able to hack your school computer if it is connected to a domain (meaning policies on the computer are managed remotely). Please remember, if your school finds out, you could face something as small as detention, or as something as harsh as expulsion

Part 1
Part 1 of 3:

PDF download Download Article
  1. Once your computer finishes restarting, you should be back at the login screen.
  2. It's a dial-shaped icon and arrow in the bottom-left corner of the screen. Since you replaced the Utility Manager app with Command Prompt, clicking this icon will open the Command Prompt window.
    Advertisement
  3. Create a new user . Once Command Prompt opens, do the following:
    • Type in net user name /add making sure to replace "name" with a username of your choice.
    • Press Enter .
    • Type in net localgroup administrators name /add again replacing "name" with the name of the user you just created.
    • Press Enter
  4. Click your new user's name, then click the Sign in button. Since you didn't create a password to go with your account, you won't need to enter one.
  5. Your account is new, so Windows 10 will need a few minutes to finish setting up your files and folders.
    • Skip this step on Windows 7.
  6. Now that you're on an account which has admin privileges, you can use your computer's system services and programs without restrictions.
  7. Advertisement
Part 2
Part 2 of 3:

Enabling Command Prompt on Windows

PDF download Download Article
  1. Press and hold the Power button on the school computer until your computer turns off, then press the Power button again to turn it back on.
  2. [1] In most cases, your computer will alert you that Windows didn't shut down properly, and you'll have a few startup options which you can select with the arrow keys.
  3. It's in the middle of the screen. To confirm your selection, you'll press Enter .
  4. Your computer will reboot like it did before, and you should arrive at a startup screen again.
  5. If the startup screen has repair options (e.g., Launch Startup Repair ) listed, proceed to the next step.
    • If the startup screen has the standard startup options listed, select Start Windows Normally again, then restart it again via the Power button. You'll need to keep doing this until you arrive at the "Startup Repair" screen.
  6. It's in the middle of the screen. Doing so will prompt the startup repair sequence to begin running.
  7. You'll need to wait for about 10 minutes after doing this before you can proceed.
  8. It's in the bottom-left corner of the error message. A drop-down list of notes will appear.
  9. Open Notepad. Scroll down to the "If the online privacy statement is not available..." heading, then click the link below it.
  10. Once Notepad opens, use it to do the following:
    • Click File in the top-left corner of Notepad.
    • Click Open... in the drop-down menu.
    • Double-click Computer in the window which opens.
    • Double-click your computer's hard drive (usually C: ).
    • Double-click the Windows folder.
    • Scroll down and double-click the System32 folder.
  11. Click the "File type" drop-down box, then click All Files in the resulting drop-down menu.
  12. This will allow you to access Command Prompt even if it's blocked on your computer:
    • Find the "Utilman" shortcut in the "U" section of files (not folders).
    • Right-click "Utilman", then click Rename
    • Type in Utilman1 , then press Enter .
    • Find the "cmd" file.
    • Right-click the "cmd" file, then click Copy [2]
    • Press Ctrl + V to paste in the copied file.
    • Right-click the copied file, then click Rename , type in Utilman , and press Enter .
  13. Click Cancel in the lower-right side of the "Open" window, then click the X in the top-right corner of the Notepad window.
  14. Click the X in the top-right corner of the error report window, then click Cancel in the lower-right corner of the Startup Repair window and click Yes when prompted. At this point, you can proceed with creating a new Administrator account .
  15. Advertisement
Part 3
Part 3 of 3:

Getting Administrator Privileges on MacOS through recovery mode

PDF download Download Article
    • To do this method, you need Mac OS X 10.7 Lion or later. [3] To check if you have this, press the Apple Button then About this Mac
  1. This is required as it will stop most software that will in one way or another record your attempts. As most of this kind of software notifies another device, disconnecting from the Internet will prevent most of this software (BEWARE: Some software may tell the school that it has lost the connection, although this can also apply to Shutting Down. If anyone questions you, say that the computer stopped responding and that you had to reboot it)
  2. Restart your Mac. To do this, click the Apple logo, then press restart
    • You may need a Confirmation to do this, depending on the settings
  3. To-Do This, Hold Command+R during startup
    • This boots the Mac into recovery mode, where you can Format the Disk, reinstall MacOS, and change a Password. [4] This may take longer than usual to load. If you boot to an Options screen with the Time Machine, Reinstall, Safari, and Disk Utility Screen, proceed to the next step. If you see the normal screen, repeat the process
  4. To-Do This, Select 'Utilities'. After this, click 'Terminal'
  5. In order to do this, there will need to be an Admin Account already on it. Type 'resetpassword'. Then, select the Admin Account and change the Password.
  6. To do this, select the account you changed the Password and enter the password
  7. To do this, click the Apple logo, select System Preferences, select Accounts (or users). Select your account, click the lock (this will require the admin password) and use it to change the privileges to give your account Admin.
  8. To do this, sign out by clicked Apple Menu, then log out (Like before, you may need to confirm this action)
  9. This means you can use it as any other Mac.
  10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What do I do if the teachers suspect me of DDOSing the school?
    Community Answer
    DDOSing is way different than the techniques described here. However, if teachers suspect you of having access to the administrator account of the school, make sure you erase any changes you made while logged in as an admin. While doing that, also check the computer's registry. You can do that if you are logged in as an administrator by pressing the start button + R, and then typing "regedit."
  • Question
    Will the school know if their computer has been hacked into?
    Community Answer
    The short answer is yes. Your school technician can see who logged onto which computer, what files they opened, etc.
  • Question
    How do I unblock things on a school computer?
    Community Answer
    Use either a proxy or a VPN on a flash drive, but usually when you plug a USB flash drive into a computer, the administrator is notified. So, either name your flash drive with a name that doesn't relate to your name/initials, or use it on a different kid's account.
See more answers
Ask a Question
      Advertisement

      Tips

      • Having access to Administrator privileges means you can use your school computer like any other computer. This includes installing programs, modifying computer settings, and more.
      • Avoid telling anyone that you hacked (or tried to hack) the computer(s). This goes for Friends, Parents, Siblings, and anyone who has contact with either the school, or contact with someone who has contact with the school
      • If your school can see what account logged in, consider using the above windows method to make your account Administrator. Unless your school can see the privileges of the user that logs in, in which case you should try to create an Account under the name of a System Admin, this will greatly reduce your chances of getting caught. To further reduce these chances, disconnect from the internet when logging in and out
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Many schools employ screen-monitoring software to watch what you're doing without having to stand over you. If your school uses this kind of software, it may be impossible for you to hack your computer without getting caught.
      • If Secure Boot is enabled on Windows 8.1 and later, then changing any of the files in System32 may result in a "Secure Boot Violation", an error only fixable by reinstalling Windows from installation media.
      • Hacking a school computer is against your school's code of conduct, and getting caught may result in suspension or expulsion. Additionally, this is illegal in some regions.
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 1,397,670 times.

      Is this article up to date?

      Advertisement