Download Article Download Article

Storing your bike on the wall is a convenient way to save space and keep your bike safe from damage. To hang your bike on the wall securely, you’ll want to use a bike rack or a bike hook. After using a drill to properly install the mount for your bike, you'll have more free space and easy access to your bike whenever you're ready for a ride.

Method 1
Method 1 of 2:

Installing a Bike Rack

Download Article
  1. Choose a vertical or horizontal wall mount depending on how you want your bike to be stored. A vertical bike rack is a good option if you're trying to conserve wall space. Choose a horizontal bike rack if you want your bike to hang flat against the wall. [1] You can even build one if you want.
    • You can find a wall-mount bike rack online here .
  2. Measure the length of the bike if you're using a vertical bike rack, or the height of the bike if you're using a horizontal bike rack.
    Advertisement
  3. Don't put the rack up too high or the bike might touch the ceiling when it's hung up. Once you have the rack in position, mark where all of the screw holes on the rack line up with the wall. Most bike racks have two screw holes. [2]
    • If you’re using a horizontal rack, make sure the distance between the floor and the bike rack is greater than the height of the bike.
    • If you’re using a vertical rack, make sure the distance between the floor and the bike rack is greater than the length of the bike.
  4. Make sure the holes you drill are deep enough that the whole length of the screws will fit in them. Use a drill bit that is slightly smaller than the screws that came with the bike rack. [3]
    • You can find power drills online here .
    • For example, if the bike rack came with 6mm screws, use a 5mm drill bit.
  5. The wall plugs will give the screws you’re going to use to mount the bike rack something to grip onto. Use wall plugs that are the same size as the screws that came with the bike rack. You can find wall plugs at your local hardware store. [4]
  6. Use a screwdriver to screw the screws that came with the bike rack into the wall plugs. Continue turning the screwdriver until the screws won't turn anymore.
  7. If you’re using a vertical bike rack, hang the bike by the front tire. If you’re using a horizontal bike rack, place the top tube of your bike frame on the rack.
  8. Advertisement
Method 2
Method 2 of 2:

Using a Bike Hook

Download Article
  1. The packaging on the hook should say the maximum load capacity. Don't use a hook that's not meant to hold the weight of the bike or it could pull out of the wall.
    • You can find bike hooks at your local hardware store or online here .
    • Use a bathroom scale to figure out the weight of the bike if you're unsure. Weigh just yourself on the scale, and then weigh yourself on the scale while holding the bike. Subtract your weight from the weight of you plus the bike - the number you're left with is how much your bike weighs.
    EXPERT TIP

    "There are a lot of options for mounting your bike, but I prefer bike hooks. They're only a few dollars apiece, and they're simple to use."

    Peter Salerno

    Installation Expert
    Peter Salerno is the owner of Hook it Up Installation, a professional installation company, which has been hanging art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.
    Peter Salerno
    Installation Expert
  2. You can get a stud finder at your local hardware store. Place the stud finder on the wall and slowly move it across the wall until it indicates that a stud has been found. Usually stud finders light up or make a beeping sound when they’re over a stud. Read the instructions that came with your stud finder for specific directions on using it.
    • You can find a stud finder online here .
  3. Measure from the furthest tip of the front tire to the furthest tip of the back tire.
  4. Make sure it's somewhere along the stud you found. Because the bike will be hung vertically, make sure the distance between the floor and the bike hook is greater than the length of the bike. [5]
  5. Make sure the hole is deep enough that the entire screw end of the bike hook can fit into it. [6]
  6. Insert the screw end of the bike hook into the hole and continue turning the hook clockwise until it won’t turn anymore. You want the hook itself to be parallel with the floor. [7]
  7. Place the front tire of the bike on the hook so that the tires are touching the wall and the seat of the bike is facing outward, away from the wall.
    Grant Petersen, Bicycle Designer

    To keep your bike safe and secure while saving space, consider mounting it on the wall. Strong anchors installed into studs can hold a bike horizontally. For lighter bikes, you can use specially designed hooks that grip the wheel rims.

  8. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Why don't bike hanging websites feature ladies bikes as well as men's bikes?
    Community Answer
    Anymore, 'men's' bikes are considered the standard and 'women's' bikes are considered a frame option. Many women buy men's bikes because there are so many more options to chose from. So, they're just more common right now.
  • Question
    I have a set of bike storage shelves from CB2. There is no problem with a road bike, but the handlebars on a hybrid are wide and I have to turn the front wheel. Is it okay with the front wheel turned? Will it cause damage?
    Community Answer
    There will be no damage to the bike with a wheel turned. Think about all the shock and abuse a bike takes during a quickly-paced ride on rough ground. The only thing to worry about is the rim brakes (if applicable). There needs to be some coating or rubber between the wheel and the hook. Other than that you are golden.
  • Question
    Why does it matter if the back wheel of the bike rests on the floor when hanging from the wall?
    Community Answer
    If the back wheel rests on the ground, the bike will not be completely stable. This makes it easy to knock the bike off the hook.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You’ll Need

      About This Article

      Article Summary X

      To hang a bike on the wall, start by buying a wall-mount bike rack either online or at a hardware store. Next, hold the bike rack flat against the wall where you’d like it to hang and mark the location of the screw holes with a pencil. Then, use a drill to make holes into the pencil marks and insert wall plugs or anchors into the holes. Once you’ve inserted the anchors, line the rack up over the holes and screw it into places with a screw driver. For tips on how to install a bike hook to hang your bike, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 670,642 times.

      Reader Success Stories

      • Toni Draper

        May 21, 2017

        "I wasn't sure it was good for my bike to be hung by the wheels, so I checked out your site and found that ..." more
      Share your story

      Did this article help you?

      Advertisement