PDF download Download Article PDF download Download Article

If you’re looking to identify or replace a utensil in your Oneida flatware collection, it can help to have the flatware pattern on hand. If you have some time to spare, examine your flatware and compare it to pictures on a replacement website. If you’d prefer to contact Oneida directly, take several well-lit, high-quality photos of your flatware and send them to the company. Within a few weeks, you can have a better idea of the flatware you have!

Identifying Oneida Flatware Patterns

Look for words or abbreviations engraved on the back of your silverware. Take note of any patterns or decorative engravings on your utensils, too. Then, compare your flatware to images online to find a pattern match. Or, send images of your flatware to Oneida to identify the pattern.

Method 1
Method 1 of 2:

Searching for Patterns Online

PDF download Download Article
  1. Hold a magnifying glass to base of your flatware and look for any special words or abbreviations. Specifically, see if “Oneida” is printed on your utensil, along with a specific pattern name. Jot down any information that you find engraved on the flatware in case you do any further research.
    • The abbreviation “SS” stands for “stainless steel.”
    • You may notice certain numbers or fractions printed on your utensils, like 18/10 or 18/0. These numbers tell you the chromium/nickel ratio of your flatware. Utensils with a higher nickel content are less likely to look rusted or tarnished. [1]
  2. Examine the bottom end of your utensils to find for any unique patterns, stamps or engravings. If your utensil is more minimalistic, you might notice a curved or straight edge along the base. If your flatware is more ornate, you might notice floral vines, curves, divots, or other unique engravings along the base. Jot down or take a mental note of any distinguishing features so you can have the information on hand. [2]
    • Oneida has hundreds of different flatware patterns, so it helps to have a thorough understanding of your utensil’s design.
    • For instance, the Arktos and Andorra flatware patterns look very similar, as they both have a sleek rectangular base with no engravings. However, the Andorra pattern has a tapered tip, while the Arktos pattern does not.
    Advertisement
  3. If you have a general idea of what kind of flatware pattern you have, use a search engine to find images of different Oneida designs. Compare the search results of a specific pattern to your own utensil to see if you found a match! [3]
    • Chromium and nickel are 2 major components in stainless steel flatware. Nickel helps to create long-lasting, shiny flatware; in higher amounts, it keeps utensils looking shiny and in great working condition.
    • Many of Oneida’s flatware products are made with 18/10 stainless steel, while their more budget-friendly items are made with 18/0 ratio.
  4. Check online to find a digital copy of Oneida’s latest flatware catalog. Keep the design attributes of your own flatware in mind as you scan the magazine and compare the pictures to your own utensil. If your silverware was made recently, you might be able to find it in the catalog.
  5. Search online to find a well-established utensil replacement site, like Finest Flatware or Flatware Finder. Try to use a website that has reference photos of various utensil patterns and engravings available, so you can compare your own flatware directly. Keep in mind that Oneida has hundreds of different products, so the comparison process might take awhile. [4]
    • If you know what collection or “division” your flatware is a part of, you might be able to narrow down your search. For instance, Wedgwood and Saint Andrea are 2 possible collections you could look into.
  6. Be sure to photograph the base of the utensil, so the company can clearly see the engraving, stamping or other pattern on the flatware. Use the company’s designated email to send over the pictures; additionally, be sure to include any information or label that was stamped on the back of each utensil. [5]
    • For instance, if your utensil has “Oneida” printed on the back of the handle, be sure to note that in an email.
    • Companies like Flatware Finder or Finest Flatware are good places to start. Locate the “Contact Us” tab on their website for more information. These companies try to reply punctually, or within several days or weeks.
  7. Advertisement
Method 2
Method 2 of 2:

Contacting the Company Directly

PDF download Download Article
  1. Arrange your utensil in a flat, open area, where the pattern or engraving on the base is clearly visible. Photograph the silverware from several angles, so Oneida staff can clearly identify your utensil. If possible, upload these photos to a computer so you can print or email them later.
    • While these photos don’t have to be professional, the details on the flatware need to be clear and distinguishable to the naked eye.
    • A camera phone can work for this process.
  2. Attach your photos in an email to Oneida’s digital branch. Draft a brief message that includes some basic information about the flatware, such as where and when you found or received the utensil. Additionally, mention if you need some replacements of this exact flatware for your household. [6]
    • If you think you have an older flatware set or utensil, be sure to mention that in your message.
    • For example, try writing something like this:
      To whom it may concern,
      I have an incomplete set of Oneida flatware, but am unsure of the exact pattern. The utensils have lines engraved in the base and are surrounded with an engraving of a floral vine. I’ve had this flatware for about 5 years, and need to replace a knife and fork in the collection. Enclosed are some photos for your convenience.
  3. If you aren’t in a rush to identify or replace your utensils, enclose a brief note regarding your flatware as well as a picture of the item in question. In your letter, mention how long you’ve had the flatware along with a brief description of what the flatware looks like.
    • Mail the letter to the following address:
      The Oneida Group
      200 S. Civic Center Drive
      Suite 700
      Columbus, Ohio 43215.
    • For instance, try writing something like this:
      I need to replace a knife in my flatware collection, but I can’t identify the pattern. The utensil is rectangular and has lines engraved around the edges.
  4. Don’t be alarmed if you don’t hear back from Oneida right away. If you don’t hear back from the company with an answer after 2 weeks, try following up with a call.
    • Oneida can be reached from 8 AM to 5 PM EST on weekdays. If you live in the US, you can reach them at 1-888-263-7195. If you live in Canada, contact them via 1-800-341-3332.
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 132,372 times.

      Did this article help you?

      Advertisement