PDF download Download Article
Learn how to install a DIRECTV satellite receiver yourself in a few easy steps
PDF download Download Article

If you are looking to install a DIRECTV satellite TV, you can either have a professional from the company install a new satellite for you or follow the installation instructions on their site and install it yourself. This wikiHow article will teach you how to set up a DIRECTV satellite.

Things You Should Know

  • Call DIRECTV to have a professional come install your satellite dish.
  • You can opt to install the dish yourself, but you must call DIRECTV to set up your TV programming.
  • Select a spot on the roof facing the southern sky that isn't blocked by trees or other obstructions.
Method 1
Method 1 of 2:

Have DIRECTV Install a Satellite

PDF download Download Article
  1. The number to order their service is 1-888-777-2454. You can also try calling 1-800-DIRECTV (347-3288).
    • If you want to upgrade your existing DIRECTV satellite receiver to a Slimline to receive HD television, call 1-800-531-5000 and say "order new equipment." You should be routed to an appropriate contact. Installing the upgraded satellite receiver is free if you already have a H20 or HR20 model of a DIRECTV HD receiver.
  2. Most satellite receivers are installed on a roof or balcony. If possible, trees and buildings should not block the receiver.
    Advertisement
  3. Advertisement
Method 2
Method 2 of 2:

Install a DIRECTV Satellite Receiver Yourself

PDF download Download Article
  1. You may need a software program such as Adobe Reader to view the file.
  2. Follow national and local guidelines for installing your dish . There may be requirements or codes that restrict the size of your satellite dish or how high you can mount it. DIRECTV offers 6 satellites in sizes from a round 18-inch (45 cm) dish to a 36 by 22-inch (90 by 55 cm) oval dish.
  3. Look for a clear, southern-facing area with a high vantage spot.
  4. Connect your satellite receiver to the TV as specified in the receiver's manual.
    • Connect 1 end of a coaxial cable to the satellite receiver through the jack labeled "OUT TO TV." Connect the other end to the antenna's "IN" jack on the television.
    • Connect both the television and satellite receiver to a power outlet. Turn them both on.
    • View the receiver's menu by tuning the television to channel number 3 or 4 if the back of the receiver has a "CH 3/CH 4" switch. If there is no switch, turn to UHF channel 14 or channel number 65 on cable.
    • Navigate the menu using buttons on the receiver's front panel and the receiver's manual to find the correct azimuth (horizontal) and elevation (vertical) coordinates.
  5. Using the receiver's pointing coordinates, find the mounting site for your dish.
  6. Bolt or screw in the satellite's plastic or metal reflector to its support arm. This lets you preset the satellite to its correct elevation.
  7. Multiple options exist for this step depending on where you install the dish (roof, hollow wall, on brick or concrete, etc.). Consult the self-installation guide to see instructions and the necessary tools for each option.
  8. Use a bubble level to help you determine it is even.
  9. Hook up the RG-6 coaxial cable to the Low Noise Block converter (LNB). Attach the LNB to the receiver's support arm.
  10. Run the receiver dish's cable to the grounding block. The connection to the block binds the dish to an acceptable grounded point in the main building ground, such as an enclosure for electrical service equipment or a metallic service raceway.
  11. The RG-6 cable should also be connected to the grounding block.
  12. Connect the receiver to a phone jack with the phone line.
  13. Adjust the dish's pointing to achieve your maximum signal strength.
  14. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I hook up the receiver sound to a surround sound system?
    Community Answer
    It depends on the connector on your surround sound system and your receiver sound. You will need to buy a wire that has a port compatible with your receiver in one end and with your sound system on the other end.
  • Question
    Can a DirecTV dish be mounted on a pole in my yard ?
    Community Answer
    It depends on what you call a pole. The dish needs to be mounted to a non-moving object. If your pole is like a wood 4x4, or a 2" diameter metal pole securely held into the ground with concrete, you should have no problems. When you mount the dish to a pole, the dish should not move at all. Mine is mounted on an 8 ft 4x4 wooden post pole placed in a 3 ft deep post hole. After verifying the post was level, it was backfilled with dirt and 12-18 inches of concrete.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You'll Need

      • Satellite receiver
      • Receiver's manual
      • Self-installation guide for DIRECTV satellite
      • Pointing coordinates
      • Coaxial cable
      • Satellite dish
      • Support arm
      • Reflector and included hardware
      • Wrench or screwdriver
      • Mast
      • Bubble level
      • Grounding block
      • Grounding wire
      • RG-6 coaxial cable
      • Phone jack
      • Phone line


      About This Article

      Thanks to all authors for creating a page that has been read 271,713 times.

      Is this article up to date?

      Advertisement