Download Article Download Article

If you work out a lot, you’ve probably encountered sports bras with pads inside of them. While they are great for some added protection and comfort, sports bra pads tend to bunch up and fold, especially when they’re in the wash. Fortunately, by using a few items around your house, you can keep your sports bra pads in place for comfortable and convenient workout attire.

Method 1
Method 1 of 2:

Sewing the Pads in Place

Download Article
  1. Turn the bra inside out and then smooth out any lumps or bumps that you see with your hands. Lay the bra out on a flat surface, like a table or a countertop. [1]
    • You can sew a clean or a dirty sports bra, but it’s probably best to use a clean, dry one so the fabric isn’t crumpled up.
  2. Adjust the pads within the sports bra so they sit in the cup of the sports bra. Make sure they are smooth and flat without any bumps or folds in them. [2]
    • If the pads are removable, you can reach in the bra and adjust them. Otherwise, just push and pull the pads through the fabric of your bra.
    Advertisement
  3. Cut a 12 in (30 cm) length of thread and put it through the eye of a sewing needle. Double up the thread, then tie the loose ends together in a small knot to keep your thread in place. [3]
    • You can pick thread that’s close to the color of your bra, or you can go with whatever thread you have on hand since the stitches will be on the inside of your bra.
  4. Find the very top of the pad at its highest point. Bring your needle into the outer layer of the bra and through the pad, but not the front part of the bra. Pull it back out through the outer layer to make a stitch about 0.25 inches (0.64 cm) long, then repeat the stitch 3 to 4 times. [4]

    Variation: If you don’t have a sewing needle or thread, you can also use safety pins to hold the pads in place. However, this is a less permanent solution, and there is a chance that the pins could come undone and poke you while you’re wearing your bra.

  5. Once you are done stitching one section of your pad, use sharp scissors to cut the thread so the needle is loose. Then, tie the loose ends of the thread into a tight knot inside of your bra. Use the scissors to cut the rest of the thread off so it’s not hanging on the inside of your bra. [5]
    • If the small knots of thread stick out and bother you while you’re wearing your bra, tape some moleskin to them to hold them down.
  6. Find the left and right rounded points of your pad and add 3 to 4 stitches on each side with your needle. This will hold down the edges of your pad so they don’t roll in. Cut your thread and tie it in a knot once you’re done with each section. [6]
    • Make sure your needle never goes through the front part of your bra so you don’t see the stitches from the outside.
  7. Advertisement
Method 2
Method 2 of 2:

Securing the Pads When Washing and Drying

Download Article
  1. Grab a mesh or rubber bag that’s made specifically for putting delicates in and put your sports bra in there when it’s time to wash it. The bag adds a layer of protection between your sports bra and the rough washing machine, so there’s less of a chance that the pads will move around. [7]
    • You can find these bags at most home goods stores or online for around $10.
  2. Most washing machines have different settings that change how fast they spin. When you wash your sports bra in a washing machine, always put it on the setting for delicates so that your bra doesn’t get spun around too much. [8]
    • You can also wash other delicates, like regular bras and underwear, on this setting.
    • Most delicate settings automatically use cold water. If yours gives you a temperature option, set it to cold.
  3. Fill up a bucket or a sink with warm water and mild laundry detergent. Swish your bra in the water until it suds up, then let it soak for about 15 minutes. Rinse out your bra with cool water until the water runs clear to get rid of all the detergent. [9]
    • Use caution as you swish your bra around so you don’t disrupt the pads too much. Try to be aware of them as much as you can so you can keep them in place.
  4. Set your sports bra in a cool, dry place and let it dry for 2 to 8 hours before putting it on again. Keep it out of the direct sunlight to avoid fading, and don’t let your bra get too hot, or it could cause shrinkage. [10]
    • You can use a hanger or a clothes rack to hang up your sports bra.

    Tip: If you live in a super humid climate, your bra may take longer to dry. Try using a dehumidifier to take some of the moisture out of the air.

  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      • Most sports bra pads are removable. If you get super fed up with the pads moving around, you can always just take them out.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      Sewing the Pads in Place

      • Sewing needle
      • Thread
      • Scissors

      Securing the Pads When Washing and Drying

      • Delicates bag
      • Laundry detergent
      • Bucket
      • Clothes rack or hanger

      About This Article

      Thanks to all authors for creating a page that has been read 54,297 times.

      Reader Success Stories

      • Fiona Shipley

        Dec 9, 2021

        "This has been driving me crazy. Now I know what to do about it."
      Share your story

      Did this article help you?

      Advertisement