How to Knit a Baby Sweater

Co-authored by wikiHow Staff

Last Updated: April 9, 2023 References

A baby sweater is a fun knitting project that is great for knitters of all skill levels! You can easily make a baby sweater in pieces and then sew the pieces together. Add difficulty by using a special knitting stitch to create the sweater pieces, or stick with a basic knit stitch to create something simple and cute!

Part 1

Part 1 of 4:

Creating the Back of the Sweater

1
Create a slipknot . Loop the yarn around your index and ring fingers twice, and then pull the first loop through the second loop. Pull the tail to secure the loop and then slide the loop onto your right-hand knitting needle. ^{[1]
X
Research source} Tug on the tail to tighten the loop around the needle.
- The slipknot will count as the first cast on stitch.
2
Cast on 33 stitches for a newborn size sweater. Loop the yarn over the left-hand needle and then insert the right-hand needle through this loop. Yarn over the right-hand needle and pull this yarn through the loop to create a cast on stitch. You should now have 2 stitches on your right-hand needle. Continue casting on until you have a total of 33 stitches. ^{[2]
X
Research source}
- Cast on 3 extra stitches for 3 month size, 6 extra stitches for 6 month size, 9 extra stitches for 9 month size, and so on. ^{[3]
  X
  Research source}
Advertisement
3
Knit for 44 rows for a newborn size sweater. Place the needle with all of the cast on stitches in your left hand and the empty needle in your right hand. Insert your right-hand needle into the first cast on stitch. Loop the yarn over the right-hand needle, and pull this yarn through the cast on stitch. ^{[4]
X
Research source} Continue working across the row in the knit stitch, and then knit for 43 more rows in the same way. ^{[5]
X
Research source}
- If you are making a larger size baby sweater, use a shirt or sweater in that size to help you determine how long to make the back piece. Keep knitting until the piece is the same as the shirt or sweater. Make a note of how many rows this is so you can knit the front pieces to the same length.
- If desired, you can use a special stitch to knit the body of the sweater. This will allow you to add some extra body and texture to the baby sweater.
4
Cast off the stitches after you complete the 44th row. When you have completed the 44th row or the row that you need to complete for the desired length, begin casting off your stitches. Knit the first 2 stitches, and then bring the first stitch over the second stitch. Then, knit 1 stitch and bring the first stitch over the new second stitch again. ^{[6]
X
Research source}
- Keep casting off to the end of the row and then tie a knot through the last stitch to secure it.
Advertisement

Part 2

Part 2 of 4:

Knitting the Front Pieces

1
Cast on 20 stitches for a newborn sweater. Make a slipknot as before and then cast on 20 stitches in the same way as you did for the back of the sweater, but leave a 18 in (46 cm) long tail, which is a strand of yarn that you do not knit. You will use the tail for sewing the front piece onto the back piece. ^{[7]
X
Research source}
- Cast on 1 extra stitch for each size above newborn. For example, if you are making a 3 month sweater, cast on 21 stitches. For a 6 month sweater, cast on 22 stitches.
2
Knit for the next 44 rows. Knit across all of the next 44 rows in the same way as you did the back piece. The front piece should be the exact same length as the back piece, so make sure to count your rows. ^{[8]
X
Research source}
- If you are making a larger size sweater, knit the same number of rows as you did for the back of the sweater.
3
Cast off after the 44th row. When the piece is 44 rows or the desired length for the size sweater you are making, begin casting off in the same way as you did for the back piece. Cast off all of the stitches in the row. ^{[9]
X
Research source}
- You can tie a knot through the final stitch to secure it and then cut the yarn 0.5 in (1.3 cm) from the last stitch.
- Repeat the process to create the second front piece. The 2 front pieces need to be identical in size, so repeat the process in exactly the same way.
Advertisement

Part 3

Part 3 of 4:

Making the Sleeves

1
Cast on 22 stitches and leave a 18 in (46 cm) long tail. Make a slipknot and cast on as you did for the other parts of the sweater. You will need a total of 22 cast on stitches if you are making a newborn sweater. ^{[10]
X
Research source}
- Add 3 extra cast on stitches for a 3 month size sweater, 6 for a 6 month size sweater, and so on. ^{[11]
  X
  Research source}
2
Knit for 32 rows for a newborn size sweater. Work the sleeve as a flat piece just as you did for the other parts of the sweater. You will sew it into a sleeve shape before attaching it to the sweater. ^{[12]
X
Research source}
- For a larger size sweater, add 1 row per size up from newborn. For example, if you are making a 3 month size sweater, knit 33 rows. For a 6 month sweater, knit 34 rows.
- You can also measure the sleeve against an existing shirt or sweater sleeve to determine how wide you need to make it. Place the folded sleeve over the sleeve of an existing sweater or shirt to check the width and see how much you should add.
3
Cast off to complete the sleeve. When you have finished knitting the sleeve to the desired size, cast off just as you did for the other sweater pieces. Tie a knot to secure the last stitch and cut off the excess 0.5 in (1.3 cm) from the last stitch. ^{[13]
X
Research source}
- Repeat the process exactly the same way to make the second sleeve.
Advertisement

Part 4

Part 4 of 4:

Assembling the Sweater

1
Lay out all of the pieces in the form of the completed sweater. Fold the sleeve pieces in half width-wise, but leave the other pieces open. Place the back piece down first, the 2 front pieces directly on top of the back piece, and then place 1 of the folded sleeve pieces on the side of each armhole. This will help you to see where you need to sew to complete the baby sweater. ^{[14]
X
Research source}
- If you left long tails on the ends of your sleeves, place the sleeve pieces so that the tails are next to the armhole areas of the front and back pieces.
2
Sew the shoulder seam to connect the front and back pieces. With the pieces on top of each other, insert the threaded yarn needle into the first stitch on the top of the back piece and then through the first stitch on the front piece. Bring the needle and yarn all the way through, leaving just a few inches on the other side of the stitch. Then, bring the yarn needle up and around to the back piece again and sew through the back and front pieces as before. ^{[15]
X
Research source}
- Keep sewing until you reach the width of 3 fingers to create the shoulder seam. Then, repeat the same process on the opposite side with the other front piece.
3
Connect the sides of the front and back pieces. Use the same stitching technique to sew through the stitches on the side of the back piece and 1 of the front pieces. Sew from the bottom up to the area where the sleeve will need to be attached. Use the sleeve to help you determine where this will be. Stop sewing where the sleeve's armpit will be. ^{[16]
X
Research source}
- Repeat the same process for the opposite side.
4
Create seams on the bottom edges of the sleeves. Thread the yarn needle with the tail of yarn you left and sew through the stitches on the top and bottom of the folded sleeve piece. The piece should be folded width-wise so that your first and last rows are aligned. Insert the yarn needle through the first stitch on the top and bottom of the folded sleeve edge, and then bring it through the top and bottom of the second stitch in the same way. ^{[17]
X
Research source}
- Keep sewing through the stitches in this manner until you reach the end of the sleeve. Then, tie a knot through the last 2 stitches to secure the seam.
- Leave the sleeve turned inside out until after you sew it onto the armhole.
5
Connect the sleeves to the armholes. With the body and sleeve still turned inside out, line up the stitches on the end of 1 sleeve with the stitches around the armhole. Insert the needle through the sleeve and armhole stitches at the center of the armpit. Pull the yarn until only 3 inches (7.6 cm) is poking through on the other side of the stitches. Continue sewing around the armhole in the same manner to connect the sleeve. ^{[18]
X
Research source}
- Tie a knot through the last stitch at the center of the armpit, and then tie the ends of the yarn together to secure the other end of the yarn.
- Repeat the same process for the other side of the sweater to secure the other sleeve.
6
Turn the sweater inside out and check for loose threads. After the sleeves are attached, turn the sweater inside out to hide the seams. If you spot any loose strands of yarn poking through, tuck them into the inside of the sweater.
- You can also cut any remaining longer pieces down to 0.5 in (1.3 cm).
7
Sew 3 evenly spaced buttons onto the front edge. To secure the sweater when the baby wears it, you will need to add a few buttons to the opening on the front. Use a threaded (with yarn) yarn needle to sew 1 button about 1 to 2 in (2.5 to 5.1 cm) below the neckline of the sweater, the next 1 about 2 to 3 in (5.1 to 7.6 cm) down from that button, and then a third button 2 to 3 in (5.1 to 7.6 cm) down from that button. Sew through the button hole several times to secure it to the sweater tightly. ^{[19]
X
Research source}
- You may need to use a smaller needle and regular thread to sew the buttons onto the sweater depending on how wide the openings on the buttons are.
- You don't need buttonholes for the buttons. You can just slip them in between the stitches on the opposite edge in the front of the sweater to secure them.
Advertisement

Community Q&A

Search

Add New Question

Question

What length needle for a size 6 needle and a size 6 DPN for a sweater for a 9-month-old?

T. Chinsen

Top Answerer

Standard single-point knitting needles are 14" or 10" in length. Double-pointed needles are 7" in length. Both types of needles are used for specific tasks. Follow the pattern guide to determine which needles to use.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 2
Question

What size needle do I use for a newborn?

T. Chinsen

Top Answerer

In the Things You'll Need section of the article, the recommended size needle is US 6 or 4 mm for lightweight (3 on label) yarn.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 4
Question

Lightweight yarn is that a 4 ply?

T. Chinsen

Top Answerer

Lightweight yarn is 2 ply or 3 ply in thickness. Look for the yarn symbol on the label to find its weight. The higher the number, the heavier the weight. Most baby yarns are lightweight. Four ply is considered a medium weight yarn.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

There are many beginner level baby sweater patterns you can try. Check online for free patterns or visit a craft supply store and browse their pattern books.

Thanks
Helpful 0 Not Helpful 0
Soft yarn works best for a baby sweater. Purchase a ball of yarn meant for making baby items to ensure that it will be comfortable against the baby's skin.

Thanks
Helpful 0 Not Helpful 0

Warnings

Small buttons may be a choking hazard for babies that can grasp them and put them in their mouths. Choose large buttons that are too big for your baby to swallow for extra safety.

Thanks
Helpful 4 Not Helpful 1

Things You'll Need

Lightweight yarn (size 3 on label)
US size 6 (4 mm) knitting needles
Scissors
A shirt or sweater in the size you want to make the sweater
3 buttons
Yarn needle

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

How to Knit a Baby Sweater

Steps

Creating the Back of the Sweater

Knitting the Front Pieces

Making the Sleeves

Assembling the Sweater

Community Q&A

Tips

Warnings

Things You'll Need

You Might Also Like

References

About this article

Did this article help you?

You Might Also Like

Explore Categories