PDF download Download Article PDF download Download Article

Many gas ovens, especially older models, may require you to manually light their pilot light to light the oven. Most of these models only emit a minimal amount of gas, so they're pretty safe to light. [1] However, it’s still important to take safety measures, like ensuring the oven is off and your kitchen is well-ventilated before you attempt to light the pilot light to avoid lighting standing gas. After that, turn the oven knob to ignite and use a long match or lighter to set the pilot light on fire safely. It’s important to know that if you are unable to light the oven on your own, you will need to call an appliance repair technician to take a look and see what the problem is.

Part 1
Part 1 of 2:

Taking Safety Measures

PDF download Download Article
  1. Turn all the knobs on your gas oven and stove to “off”. Make sure that your kitchen doesn’t smell like gas before you try to light the oven. [2]
    • The “off” position will be with the knobs turned all the way to the right and the dial facing straight up. Listen to make sure there is no hissing sound that means gas is coming out. Sniff for the smell of gas.
  2. It’s important to make sure your kitchen is well-ventilated before you try to light the oven to be extra sure there is no standing gas. This is especially important if you’ve already been trying to light the oven for a while and turning the knobs on and off. [3]
    • Once you have ventilated the kitchen as much as possible, it’s a good idea to let it air out for a few minutes if you were already trying to light the oven before. This will allow any gas sitting around to disperse.
    Advertisement
  3. Open the oven door all the way to safely locate the pilot light. Make sure the door is all the way down and locked into place.
    • Locating the light before you turn on the gas is important so that you don't leave the gas running while you search for it.
  4. It is a small hole that is usually located in the front center, near the door, or in a back corner. Some ovens will have it labeled “pilot light”. [4]
    • If you don’t see a hole in the bottom of the oven, and your model of oven has a broiler drawer at the bottom, then the pilot light could be in the back of the broiler drawer.
  5. Wipe away any grease and crust from around the pilot light to remove things that could catch on fire. Use a grease-fighting spray cleaner to get off any stubborn gunk. [5]
    • This is an extra precaution and is more important if the gas stove and oven hasn’t been used in a while and is particularly dirty.
  6. Advertisement
Part 2
Part 2 of 2:

Lighting the Pilot Light

PDF download Download Article
  1. Push in the oven knob with one hand so you can turn it and keep holding it until you have lit the pilot light. Turn it to the left to the “ignite” symbol or the first temperature setting. [6]
    • Every oven model is different, but there should be either a little picture of a flame or the start of the temperature numbers right in the middle of the dial on the left hand side. This is where you want to turn the knob.
  2. Light a long match with your hand that isn’t holding the oven knob, or use a lighter with a long tip (like a BBQ lighter). Slowly move the flame towards the pilot light hole until it lights. [7]
    • If you only have small matches, you can light one and drop it into the hole to be safe. Another alternative is lighting a twisted up piece of paper or a wooden skewer to use as the lighter.
  3. You need to let the pilot light heat up for about 10 seconds before you adjust the temperature. The pilot light will just go out if you try to change the oven’s temperature too soon. [8]
    • If you accidentally let go of the knob and the pilot light goes out, then you should turn everything off and start from the beginning.
  4. Shut the oven once you are sure the pilot light is staying lit. Turn the oven knob to the temperature you want to set it at. [9]
    • If you have tried this process several times, and still can’t light your gas oven, there may be a problem with the pilot light and you should call a professional to come take a look at it.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    I just bought a new gas oven. Will I need to light it myself?
    Gevorg Grigorian
    Appliance Repair Expert
    Gevorg Grigorian is an Appliance Repair Specialist and the Owner of G and R Appliance Repair in Los Angeles, California. With over 12 years of experience, Gevorg specializes in residential and commercial appliance repairs as well as heating, ventilation, and air conditioning (HVAC) services. Gevorg holds a BS in Business Administration and Management from California State University-Northridge.
    Appliance Repair Expert
    Expert Answer
    Newer gas ovens use an electric igniter, which means you don't need to light it yourself. All you need to do is turn the knob to the degree that you prefer and it will automatically turn on the flame.
Ask a Question
      Advertisement

      Video

      Tips

      • If you are unable to light your gas oven after a few attempts, you should turn everything off and have a professional look at it to see what the problem may be.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always make sure the oven and stove burners are off before you attempt to light the oven. Open up windows and doors in your kitchen to ventilate it as much as possible to avoid standing gas.


      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 353,467 times.

      Did this article help you?

      Advertisement