Download Article
Download Article
Ceramic tile can be a beautiful addition to your home or garden. It begins with just a lump of clay, which is mixed with other ingredients to create a medium by which to form the tiles. Pigments and designs are added before glazing to add color and texture. If you love working with your hands, making your own ceramic tile can be fun and rewarding, especially if you intend to use it in your own home or garden. Aside from purchasing a kiln for firing your tiles, most ingredients are fairly inexpensive and some can be made from materials in your own home. Making ceramic tiles takes only a bit of creativity and time.
Steps
Download Article
-
Begin with good clay, such as that designed for sculpting and that has small- and large-sized grog (fired and ground up clay). -
Check the temperature at which you will fire the clay.Advertisement -
Ensure that the clay you use will mature at that temperature. -
Work the clay when it is fairly dry. -
Ensure that your clay tiles are at least 1/2-inch (1.3 cm) thick. -
Roll a slab of clay onto a hard working surface from which your clay can be easily removed. -
Use a slab roller to flatten the clay. [1] X Research source
Advertisement
-
Calculate the diameter of a ball of clay that is needed to reach your tile's size, including shrinkage. -
Use a magic marker to mark that size on your bat. -
Throw to the mark. -
Determine the weight of the clay ball that ended up to be the correct dimensions of your tile and use that weight for the rest of the clay.
Advertisement
-
Construct a bottomless wood frame. -
Pound the clay into the frame. -
Cut off the excess clay. [2] X Research source -
Allow the clay to dry slightly or use a spray lubricant to avoid having it stick to the wooden frame. -
Push the clay out of the frame's bottom using a strong material the same size as the clay.
Advertisement
-
Purchase a clay-cutting device, which is similar to a cheese slicer, or make your own. -
Ensure that the device is at the specific thickness for your tile specifications. -
Put the device wire evenly through the block of plugged clay (ground clay that is kneaded with water and becomes more elasticized) to slice off tile pieces.
Advertisement
-
Cover the tiles with plastic. [3] X Research source -
Place the tiles between two pieces of sheetrock, plywood or fire-proofing board to help draw out the moisture or dry the tiles on a wire rack or plastic grids.
Advertisement
-
Incise a slab of clay with a 3.94-inch-long (100 mm) line. -
Fire the slab at the appropriate temperature. [4] X Research source -
Measure the line after firing to determine shrinkage rate. [5] X Research source -
Stack your tiles atop each other or place the tiles in a tile setter for bisque firing or place tiles on a flat surface for glaze firing. [6] X Research source- If you are loading a bisque firing, put the pieces of the same size together for the first firing.
- You should expose those pieces to at least one section of heating elements in the kiln. If they are not exposed evenly to the rows of heating elements, they might not mature to the same temperature.
- You can vary their placement. Stack smaller pieces, bottom to bottom or rim to rim. You can also put very tiny, lightweight pieces inside other pieces to save on space.
-
Create a moat to protect your tiles and ensure even firing using bars of clay.
Advertisement
Video
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Keep your slabs of wet clay flat while working with it. Do not peel the slabs off the working surface as this will tend to make the clay warp later.Thanks
- Waxing your tile's edges before drying will help the tiles dry evenly.Thanks
- You can purchase clay roller that has 2 rollers, 1 for each clay surface, so that the clay can be rolled out evenly on both sides.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be sure to use the tile for its intended purpose. Some tiles are intended for walkway and floors, while others are for walls, showers and decorative accents. Be careful to not place highly glazed tiles on a walkway as they can be slippery.Thanks
Advertisement
Things You'll Need
- Clay
- Hard, flat surface on which to work with the slab
- Kiln
- Roller, wheel, press or slicer
- Templates for cutting tiles
- Cutting tools
- Sheetrock, plywood or fire-proofing board
- Wire rack or plastic grid
- Plastic wrap
- Oil
References
- ↑ https://ceramicartsnetwork.org/daily/pottery-making-techniques/making-ceramic-tile/flat-tiles-the-easy-way/
- ↑ http://www.madehow.com/Volume-1/Ceramic-Tile.html
- ↑ https://people.goshen.edu/~marvinpb/dryingslabs.html
- ↑ http://www.madehow.com/Volume-1/Ceramic-Tile.html
- ↑ http://www.madehow.com/Volume-1/Ceramic-Tile.html
- ↑ http://www.madehow.com/Volume-1/Ceramic-Tile.html
- Ceramic Tile Making
- http://www.lakesidepottery.com/HTML%20Text/Tips/Making%20Ceramic%20Tiles.htm
About This Article
Thanks to all authors for creating a page that has been read 174,036 times.
Reader Success Stories
- "The fact you could use real clay. I thought you could, but wasn't sure. I love this site."
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"The fact you could use real clay. I thought you could, but wasn't sure. I love this site."
"This will help me for sure."
