Download Article
Give yourself a fake DIY braceface with our help
Download Article
If you have naturally straight teeth, you’ll be spared a lot of extra time, money, and discomfort by getting to skip the process of braces. However, sometimes the appearance of braces is what you desire, whether or not they’re necessary. Whether you need them for a costume or you just want to change up your look, braces are the perfect way to look geek chic. There are a few methods to easily make fake braces. Be careful, however. Anytime you are putting metal against your teeth, you risk scratching the enamel. Fake braces shouldn't be worn for long periods of time– use them when you want to play dress-up or need an accessory for a costume!
Best Way to Make Fake Braces
Unbend a paper clip and make it into a U-shape. Glue beads along the length of the paper clip so they line up with your teeth. Then, put some orthodontic wax on the ends of the paper clip so it's more comfortable to wear in your mouth.
Steps
-
Unroll a paper clip with your hands. Make sure to choose a thin paper clip for this project. The thicker paper clips will not work for this method, and will also look clunky and unrealistic on your teeth. The beads that you will be using to make the brackets with will also not fit on a thicker paper clip. [1] X Research source -
Bend the paper clip into a large “U” shape. This shape should fit around your top teeth. After you’ve created the “U” and smoothed out any kinks in the wire, test it. Smile and pop the wire onto your top teeth, seeing how it feels. Fix any areas where it’s uncomfortable or doesn’t look natural. [2] X Research sourceAdvertisement -
Count your teeth in your smile. In other words, see how many teeth are showing when you smile naturally. You’ll need one bead for each visible tooth. The beads will look like the brackets of braces. [3] X Research source -
Thread your beads onto the paperclip. You can find small beads at any art supply store, and choose the colors you’d like for your braces. After they’re all on the paperclip, hold it up to your mouth and smile again. Adjust the beads so that each one is centered on a tooth. Once you have them centered properly, carefully remove the brace from your mouth. [4] X Research source
-
Glue the beads in place. Carefully lay the paperclip onto a paper plate or piece of paper, and make sure they haven’t moved from their measured positions. Using a non-toxic superglue, carefully glue the beads into place. Let the glue dry for about ten minutes. Once the beads are firmly in place, carefully use your finger to scratch off any excess glue. [5] X Research source
- The superglue won’t breakdown in your mouth for three to four weeks. You likely won’t be wearing the braces 24/7, so your fake braces will last even longer.
-
Bend the ends of the paperclip. Take a pair of pliers and bend the ends up 90 degrees into an "L" shape. Now bend the tip of your "L" back until it lies flat along the back of the "L." Essentially, the wire will be doubled over. Do this slowly and carefully, and be patient. It will take a couple of gentle compressions with your pliers to create this compressed bend. [6] X Research source
-
Apply orthodontic wax. You can find orthodontic wax in most drugs stores. Break a stick of orthodontic wax in two and roll each piece between your palms to create two balls of wax. Push each end of your braces through a ball of the wax. [7] X Research source
-
Try your braces on. Gently place the braces over your top teeth and adjust them. Gently push the orthodontic wax against your teeth so that it helps hold your braces in place, while also flattening out to look more natural. You may have to play around with your braces for a bit to get them looking perfect. [8] X Research source- Remember, only wear your fake braces for short periods of time to ensure you don't hurt your teeth or gums.
Advertisement
-
Get the proper-sized rubber band. You’ll need one that fits around the front of your teeth and goes around the back. The best kinds to use are the small rubber bands used for tiny braids. You can find these at drugstores and beauty supply stores. [9] X Research source -
Add butterfly earring backs. You’ll need to snap one earring back on for each tooth that is visible when you smile. Put them all onto the rubber band facing the same way. The flat part of the butterfly back will be against your tooth, with the bumps facing outwards. These will look like the brackets of braces. [10] X Research source
-
Put the rubber band around your teeth. Be careful to stretch the band gently so that it doesn’t snap. Once the rubber band is looped around all of your upper teeth, you can adjust the butterfly backs. Slide each one until it’s centered over each tooth. [11] X Research source- The butterfly backs can cause gum irritation and scratches to your teeth, so make sure you only wear these for short spurts of time. Take your fake braces off when you’re eating and sleeping.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- You can buy "Brace-lets," which are bracelets made from real orthodontic rubber bands that are used on actual braces. They make a pretty cool accessory!
- You can buy a retainer at a drug store. The metal type kind of look like real braces, and you won't have to glue anything.
- Make sure you wash the earring backs before putting them on your teeth. Earring backs can harbor a lot of germs.
- If the end of the wire or paperclip is poking you, put wax or gum on it.
- You can use a coated paper clip so it does not rub on your teeth.
- If you use pliers, always disinfect them first.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=kzfs_Jzx23M
- ↑ https://www.youtube.com/watch?v=ILRNcQvOE50
About This Article
Article Summary
X
If you have a paper clip, you can start making your fake braces by shaping the paper clip into a “U” shape. Once that’s done, smile into a mirror and count how many teeth you can see. For each tooth, slide a colored bead onto the paper clip and superglue it in place. Let the glue dry for 10 minutes, then place orthodontic wax on the ends of the paper clip. Put the paper clip into your mouth and press the wax against your teeth! If you want to learn how to use a rubber band and earring backs to make fake braces, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 842,345 times.
Reader Success Stories
- "This article was very helpful because I have been looking everywhere on the internet for how to make fake braces. Thank you wikiHow!" ..." more
Advertisement
"This article was very helpful because I have been looking everywhere on the internet for how to make fake braces. Thank you wikiHow!"
..."
more
"I've always wanted braces but my parents are too cheap to pay for them so I decided to make them myself, thanks to wiki!"
..."
more
"The video helped because it did not only explained, but showed what specific tools you need."
"This one looked way more realistic in the pictures. So it's the one I tried. It works well."
"Awesome and amazing. You guys are very creative. I am going to do this for Halloween! "
