Download Article
Download Article
If you're looking for a simple gift that is appropriate for nearly anyone, consider making a keychain! Homemade keychains are inexpensive and fun to make yourself. They are also easy crafts for kids to make with a bit of grown up assistance. Here are a few ideas to get you started making your very own keychains.
Steps
-
Gather your materials. Making a clay keychain requires mold-and-bake clay (also known as polymer clay), a small cookie cutter, a large needle or toothpick, and a split ring or keychain assembly. Make sure to cover your space with newspaper or something that can keep the clay from sticking onto the table!
- Split rings come in a variety of shapes and sizes. You can buy larger ones that a decorative clay shape can be directly attached to or you can buy a more complex split ring and chain assembly that is made specifically to attach your own keychain art to. Pick whichever one you like. You can even reuse parts from an old keychain if you have one lying around.
-
Roll a small piece of the mold-and-bake clay to a thickness of about 1 ⁄ 8 inch (0.3 cm), using a rolling pin or other rolling tool (you may even be able to use a pen or pencil). The clay should come out smooth and the thickness should be uniform throughout.- If desired, press more than one color together to create a swirled effect. You can even make small shapes and press them into a larger piece of the clay. Be creative!
Advertisement -
Use a cookie cutter to cut the clay into the desired shape. Choose the shape of your choice, such as a flower for Mother's Day, a clover for St. Patrick's Day, a heart for Valentine's Day. Sports fans will enjoy a keychain shaped like a basketball, baseball or football.
- You can also create your own shape for your key chain with a sharp paring knife or utility knife.
-
Create a hole approximately 1 ⁄ 4 inch (0.6 cm) from the top of the shape, using a sharp object such as a needle or toothpick.
- This hole will be used to attach your clay shape to the split ring, so make sure the hole is in a position that will make this possible.
- Many mold-and-bake clays allow you to attach small jewelry findings, such as small metal loops, directly into the clay before baking. If the clay you purchased allows this, it may be a good idea to attach a loop of wire to your clay shape so that a split ring can be easily attached to it later.
-
Place the clay shape on a baking sheet and bake according to the directions on the package. Remove from the oven and allow to cool completely before attempting the next step.
-
Attach your slip ring or keychain assembly to the cooled shape. Be careful not to be too rough when connecting the two pieces together, as it could break your beautiful new keychain.
Advertisement
-
Gather your materials. You will need to collect at least two colors of craft foam (one that has adhesive on it and one that doesn't), scissors, and a split ring or key chain assembly.
- You do not need a ton of craft foam! Even pieces only a few inches long and a few inches wide will work just fine. In fact, this project is a good one to use up scraps from other projects.
-
Cut out small squares of the adhesive craft foam measuring approximately 2 1 ⁄ 2 inches (6.4 cm) each. You will need to cut out as many squares as letters you want on your keychain.
- Alternatively, use up to four different colors to create a keychain with layers of color.
- When deciding which letters to put on your keychain consider using your initials (if the keychain is for you) or a simple four letter word that is important to you, such as "love" or "cute". You don't want a huge keychain hanging off your keys, so keep it short and sweet.
-
Write out one of the letters you have chosen for your keychain on each piece of the craft foam using a pencil or marker. Each letter should be about 1 inch (2.5 cm) tall.
- Use block letters to draw each letter to that when you cut out the letter the center of the letter will be the color of the foam, not the color of your pen or pencil. Try a creative design or font that will make the letters unique but legible.
-
Use a pair of sharp scissors to cut out the craft foam letter. Take your time to cut the letter out as neatly as possible. If the letter you are cutting out has a central area that you need to cut out, start cutting in the center of the area, away from the edge line. This way you can be careful and gradually cut away the foam up to the line.
-
Lay all the letters on of the remaining piece of craft foam, the one with no adhesive. Decide how they should be arranged and what the overall shape and size of the finished keychain should be.
- Don't take the backing off of your foam letters just yet. Take the time to make sure your layout is just the way you want it before you do!
-
Cut out the overall shape of your keychain on the craft foam. Remember that all of the letters you cut out earlier should fit onto it with space around each to frame the letters nicely.
- While a rectangular shape is just fine, remember that you can be creative with this shape too.
-
Peel the backing from each letter. Stick each letter onto the larger piece of foam, working carefully to be sure the letters are lined up. Be sure to press each letter down firmly, so that they won't fall off.
-
Use a paper punch, or something with a sharp point, to make a hole about 1 ⁄ 4 inch (0.6 cm) from the top of the foam shape you have made. This hole is for the ring to attach to, so make sure you are putting it in a spot that will make that possible.
-
Attach a split ring or keychain assembly through the hole. Be gentle with the foam, as you don't want to tear your project at the very end. Now you have a great personalized keychain that is ready to use.
Advertisement
-
Gather your materials. To make a lanyard keychain all you will need is a split ring or keychain assembly and some thin rope or plastic lacing. The rope or lacing will need to be at least four times as long as you would like your finished lanyard to be, so lengths will vary, but they need to be at least three feet long so you will have enough rope to handle. [1] X Research source
- Cut two pieces of the rope or lacing the same length. It is nice if each is a different color, so that your finished keychain is colorful and so it's easier to keep track of where you are in your weaving process.
- Some people like to make these keychains with paracord, so that if you are ever in an emergency and you need a bit of rope, you will have it with you! [2] X Research source
-
Thread both ropes through the ring or keychain assembly. Make sure the center of each rope is positioned at the ring (unless you are using a weaving technique that requires something different). Secure the ring to a flat surface with a piece of tape. This will allow you to have a secure project as you weave. You should now have four ends of rope to weave together.
- Pick a spot to attach your ring that allows you to have a lot of room to weave your ropes together. A great spot is a table that is free of clutter.
-
Weave the ropes together. There are a variety of techniques you could use for weaving your keychain, but even a simple braid can look beautiful with the right rope or plastic lacing. Whichever technique you use, make sure to keep your strands tight and don't be afraid to undo a bit of your weaving if you find you have made a mistake. It's better to fix a problem now than notice it in your keychain forever.
- For an assortment of weaving techniques see: How to Make a Cobra With Plastic String , How to Make Lanyards , and How to Make a Box Styled Gimp . Any technique you have used for lanyards or friendship bracelets should work for making a keychain.
-
Tie off the ends your rope and make sure to neatly trim them. Your lanyard keychain is finished!
Advertisement
Community Q&A
Search
-
QuestionWhere can I get keychain rings?SiarahCommunity AnswerYou can get them from any craft store or from Walmart.
-
QuestionWhere can I find polymer clay?NinjaKiki3 FunCommunity AnswerCraft stores, Amazon.com, pretty much anywhere that sells craft supplies. Just search “Polymer Clay” on a craft store website or ask somebody who works at the craft store where it is. Amazon.com has some of the best prices, but it also depends on what brand you want.
-
QuestionHow much does a keychain ring cost?Community AnswerIt varies. You can find a ten pack of them on Amazon for about $2.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Keychains can also be used as colorful zipper pulls.Thanks
- Attach a miniature flashlight to make your keychain even more useful.Thanks
- Split rings are available at most craft stores and hardware stores.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
References
About This Article
Article Summary
X
To make a keychain, start by cutting 2 equal lengths of rope, lacing, or paracord so that they are 4 times as long as you want your finished lanyard to be. Then, thread the ropes through the key ring and use a piece of tape to secure it to a flat surface. Next, braid the strands of rope together, making sure to keep your strands tight. Finally, tie a knot at the end of your ropes and trim the ends. For tips on how to make a keychain out of modeling clay, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 272,255 times.
Reader Success Stories
- "I wanted to make a keychain, and this really helped."
Advertisement
"I wanted to make a keychain, and this really helped."
"The lanyard info and steps were very helpful!"
"Thanks for the tip. This is very easy."
"Foam letter keychain is the best."
"Method of foam keychain helped."
